ExactFit

Reviewed GE Profile refrigerator dimensions and fit checks

14 reviewed GE Profile model records. Requirements vary by exact model: a shared brand or nominal size does not establish the same dimensions or installation clearances.

Recorded configurations: 3 Bottom Freezer; 9 French Door; 2 Side-by-Side.

Check your opening →

How big are GE Profile refrigerators?

Freestanding GE Profile refrigerators are 35⅝–35¾ in wide and 69¾–69⅞ in tall to the top of the hinges (12 models; the smallest and largest 5% are left out). Why hinge height matters →

TypeModelsWidthHeight (to top of hinges)Depth with handles
French door935⅝–35¾ in69¾–70½ in31¼–36¾ in
Bottom freezer335⅝ in69⅞ in31¼–36¾ in

Gaps GE Profile usually asks for: about ⅛ in each side and 1 in above, plus 2 in behind. Check the exact model: some ask for more.

Check your opening against all 14 GE Profile models →

How GE Profile refrigerators compare

ExactFit has reviewed 14 GE Profile refrigerators against the manufacturer's own dimension guides, installation instructions and spec sheets. Within one brand the measurements still vary by exact model: two GE Profile refrigerators sold in the same nominal size can need different openings, different side and rear gaps, and different room for the doors to open. Use the figures below to see how wide that spread is, then check the exact model you are considering.

What the verified measurements show

The opening width they need ranges from 35 7/8 in for the GE Profile PAD28BYTFS to 47 1/2 in for the GE Profile PSB48YSNSS, with half needing 36 in or less. The cabinet-only depth runs from 23 1/2 in (GE Profile PSB42YSNSS) to 29 1/2 in (GE Profile PGE29BYTFS). The depth with the doors closed, handles included runs from 28 3/8 in (GE Profile PSB42YSNSS) to 36 3/4 in (GE Profile PVD28HYYFS). The height including the hinges runs from 69 3/4 in (GE Profile PVD28HYYFS) to 84 in (GE Profile PSB48YSNSS). With a door open at 90 degrees, 14 of these models have a verified depth; the typical one needs 48 3/8 in from the back wall, and the deepest, the GE Profile PSB48YSNSS, needs 52 3/8 in. 14 models have a verified hinge-side wall clearance for the door to open 90 degrees: from 4 7/16 in to 4 5/8 in, typically 4 5/8 in.