Measurement evidence for GE Profile PAE28BYTFS

Value used by ExactFit

35.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE Profile™ ENERGY STAR® 28.3 Cu. Ft. Quad-Door Refrigerator with Dual-Dispense AutoFill Pitcher - PAE28BYTFS - GE Appliances
GE Profile · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Overall Width\",\"value\":\"35.625 in
Reviewed: 2026-09-04

Overall Width\",\"value\":\"35.625 in

Why this value was used

Overall Width\",\"value\":\"35.625 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE Profile PAE28BYTFS Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

C Height to top of case (in) -> 68 5/8

Why this value was used

C Height to top of case (in) -> 68 5/8

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE Profile PAE28BYTFS Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

B Height to top of hinge cover (in) -> 69 3/4

Why this value was used

B Height to top of hinge cover (in) -> 69 3/4

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE Profile™ ENERGY STAR® 28.3 Cu. Ft. Quad-Door Refrigerator with Dual-Dispense AutoFill Pitcher - PAE28BYTFS - GE Appliances
GE Profile · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model page: Case Depth Without Door 29.5 in; prior value was depth without handle.
Reviewed: 2026-09-04

Official exact-model page: Case Depth Without Door 29.5 in; prior value was depth without handle.

Why this value was used

Official exact-model page: Case Depth Without Door 29.5 in; prior value was depth without handle.

Other evidence found

• 34.25 in — superseded

  95968927.pdf; page 1. Model scope: not separately recorded. Raw value: F Case Depth without Door Handle (in) -> 34 1/4. The final reviewed registry supersedes this earlier audit value. Official exact-model page: Case Depth Without Door 29.5 in; prior value was depth without handle.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE Profile™ ENERGY STAR® 28.3 Cu. Ft. Quad-Door Refrigerator with Dual-Dispense AutoFill Pitcher - PAE28BYTFS - GE Appliances
GE Profile · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Without Handle\",\"value\":\"34.25 in
Reviewed: 2026-09-04

Depth Without Handle\",\"value\":\"34.25 in

Why this value was used

Depth Without Handle\",\"value\":\"34.25 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE Profile PAE28BYTFS Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

G Overall Case Depth with Door Handle (in) -> 36 3/4

Why this value was used

G Overall Case Depth with Door Handle (in) -> 36 3/4

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

48.375 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

GE Profile PAE28BYTFS 36 Inch 4-Door French ...
www.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with Door at 90° = 48.375 in | GE Profile PAE28BYTFS 36 Inch 4-Door French ... Depth with Door
Reviewed: 2026-09-04

Depth with Door at 90° = 48.375 in | GE Profile PAE28BYTFS 36 Inch 4-Door French ... Depth with Door at 90°: 48 3/8 Inch. Height: 69 7/8 Inch. Height without Hinges ... Installation Clearance - Side | independent cached support: ajmadison.com, handlersappliance.com

Why this value was used

Depth with Door at 90° = 48.375 in | GE Profile PAE28BYTFS 36 Inch 4-Door French ... Depth with Door at 90°: 48 3/8 Inch. Height: 69 7/8 Inch. Height without Hinges ... Installation Clearance - Side | independent cached support: ajmadison.com, handlersappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case_width_in,width_doors_closed_in) + 2 * side_clearance_wall_in = 35.875

Confidence label: high.

Calculation inputs: Cabinet case width; Overall width; Adjoining-wall clearance (reviewed endpoint);

Primary evidence

GE Profile™ ENERGY STAR® 28.3 Cu. Ft. Quad-Door Refrigerator with Dual-Dispense AutoFill Pitcher - PAE28BYTFS - GE Appliances
GE Profile · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official Overall Width and Side Air Clearances; max(case_width_in,width_doors_closed_in) + 2 * side_
Reviewed: 2026-09-04

Official Overall Width and Side Air Clearances; max(case_width_in,width_doors_closed_in) + 2 * side_clearance_wall_in = 35.875 in

Why this value was used

Official Overall Width and Side Air Clearances; max(case_width_in,width_doors_closed_in) + 2 * side_clearance_wall_in = 35.875 in Calculation or inference: max(case_width_in,width_doors_closed_in) + 2 * side_clearance_wall_in = 35.875.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

GE Profile™ ENERGY STAR® 28.3 Cu. Ft. Quad-Door Refrigerator with Dual-Dispense AutoFill Pitcher - PAE28BYTFS - GE Appliances
GE Profile · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 69.75 in plus documented top clearanc
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 69.75 in plus documented top clearance 1.0 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 69.75 in plus documented top clearance 1.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

GE Profile™ ENERGY STAR® 28.3 Cu. Ft. Quad-Door Refrigerator with Dual-Dispense AutoFill Pitcher - PAE28BYTFS - GE Appliances
GE Profile · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening depth derived from case-only depth 29.5 in plus documented rear clearance 2.0 in.
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.5 in plus documented rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 29.5 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE Profile™ ENERGY STAR® 28.3 Cu. Ft. Quad-Door Refrigerator with Dual-Dispense AutoFill Pitcher - PAE28BYTFS - GE Appliances
GE Profile · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Side Air Clearances\",\"value\":\"1/8 in
Reviewed: 2026-09-05

Side Air Clearances\",\"value\":\"1/8 in

Why this value was used

Side Air Clearances\",\"value\":\"1/8 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE Profile™ ENERGY STAR® 28.3 Cu. Ft. Quad-Door Refrigerator with Dual-Dispense AutoFill Pitcher - PAE28BYTFS - GE Appliances
GE Profile · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Side Air Clearances\",\"value\":\"1/8 in
Reviewed: 2026-09-05

Side Air Clearances\",\"value\":\"1/8 in

Why this value was used

Side Air Clearances\",\"value\":\"1/8 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE Profile™ ENERGY STAR® 28.3 Cu. Ft. Quad-Door Refrigerator with Dual-Dispense AutoFill Pitcher - PAE28BYTFS - GE Appliances
GE Profile · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Top Air Clearances\",\"value\":\"1 in
Reviewed: 2026-09-05

Top Air Clearances\",\"value\":\"1 in

Why this value was used

Top Air Clearances\",\"value\":\"1 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE Profile™ ENERGY STAR® 28.3 Cu. Ft. Quad-Door Refrigerator with Dual-Dispense AutoFill Pitcher - PAE28BYTFS - GE Appliances
GE Profile · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Back Air Clearances\",\"value\":\"2 in
Reviewed: 2026-09-05

Back Air Clearances\",\"value\":\"2 in

Why this value was used

Back Air Clearances\",\"value\":\"2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

4.625 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: ceil_to_1/8((width_open_90 - max(case_width,width_closed)) / 2)

Confidence label: medium.

Primary evidence

GE Profile PAE28BYTFS Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Exact width-open geometry: 44.875 in open minus 35.625 in closed; dual-door half-excess rounded upward to 1/8 in = 4.625 in.

Why this value was used

Exact width-open geometry: 44.875 in open minus 35.625 in closed; dual-door half-excess rounded upward to 1/8 in = 4.625 in. Calculation or inference: ceil_to_1/8((width_open_90 - max(case_width,width_closed)) / 2).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE Profile PAE28BYTFS Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

J Case Width (in) = 35 5/8"

Why this value was used

J Case Width (in) = 35 5/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

0.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE Profile™ ENERGY STAR® 28.3 Cu. Ft. Quad-Door Refrigerator with Dual-Dispense AutoFill Pitcher - PAE28BYTFS - GE Appliances
GE Profile · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Side Air Clearances\",\"value\":\"1/8 in
Reviewed: 2026-09-04

Side Air Clearances\",\"value\":\"1/8 in

Why this value was used

Side Air Clearances\",\"value\":\"1/8 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.