GE Profile PXD22HYYFS dimensions and required opening

Name: GE Profile PXD22HYYFS
Brand: GE Profile

36-inch classFrench doorCounter-depth

Checked against GE Profile's documents, Oct 29, 2026

The opening it needs

Includes the gaps GE Profile asks for.

Width36″91.4 cm

Height70⅞″180 cm

Depth26½″67.3 cm

35⅝ in wide, but needs 36 in with the side gaps
The hinges make it 69¾ in tall, not 68⅝ in
31¼ in deep with handles: the doors stand out past counters
Next to a wall: leave 4⅝ in on the hinge side

Check if it fits your space

Fit PXD22HYYFS against your opening

Opening width (in)inThe space between the cabinets or walls on each side. Measure at the bottom, middle and top, and use the smallest.Opening height (in)inFrom the finished floor to the underside of the cabinet or ceiling above. Measure at the left, center and right, and use the smallest.Depth to the front edge of your countertop (in)inFrom the finished back wall to the front edge of the countertop beside the fridge. The fridge box and the gap behind it must fit within this; the doors and handles stand out in front.

How to measure your opening

Measurements stay in this tab’s session storage. They are not sent to analytics.

All measurements

Where each number comes from →

The fridge itself

Width	35⅝″90.5 cm
Height to top of case	68⅝″174 cm
Height to top of hinges	69¾″177 cm
Depth, case only	24½″62.2 cm
Depth with doors, no handles	28⅞″73.3 cm
Depth with handles	31¼″79.4 cm

Gaps GE Profile asks for

Each sideestimate	⅛″0.3 cm
Above	1″2.5 cm
Behind	2″5.1 cm
Hinge side, next to a wall (doors to 90°)calculated	4⅝″11.7 cm
Hinge side, door fully open	Not published

With the doors open

From the back wall to the front of the open doors (90°)	43″109 cm

calculated = worked out from GE Profile's figures · estimate = not printed for this model; typical GE Profile gap · Sources for every number · Report a wrong number

Similar french door fridges

Bosch B36CD52SNSNeeds 36 × 70 in · 31⅛ in deep Bosch B36CL81ENGNeeds 36 × 72 in · 29 in deep Bosch B36CT80SNSNeeds 36 × 72 in · 31⅛ in deep Bosch B36CT84SNSNeeds 36 × 72 in · 31⅛ in deep Bosch B36FD52SNSNeeds 36 × 70 in · 35 7/16 in deep KitchenAid KRFC236SPSNeeds 36 × 70 3/16 in · 32 3/16 in deep

More: Counter-depth refrigerators compared by actual dimensions · French-door refrigerators compared by fit and door clearance · Refrigerators that fit openings up to 36 inches wide · Refrigerators that fit under 72 inches tall

How we checked

Most sizes and gaps come from GE Profile's documents for this model. The side gap isn't printed for this model, so it's an estimate from similar GE Profile models. Not checked: delivery path, plumbing and power.

Every number with its source · How we verify · Why hinge height matters

GE Profile documents

Confirm current manufacturer specifications and installation requirements before purchase or installation. ExactFit does not evaluate every delivery-path, plumbing, electrical, trim, floor, or door-swing condition.