KitchenAid KBSD736SPS dimensions and required opening

Name: KitchenAid KBSD736SPS
Brand: KitchenAid

36-inch classSide-by-sideBuilt-in

Also sold as KBSD736SPS07 and similar (same fridge).

Checked against KitchenAid's documents, Oct 29, 2026

The opening it needs

KitchenAid gives three cutouts for this model, depending on how it sits in your cabinets.

Width35½″90.2 cm

Height83¼″211 cm

Depth24″61.0 cm

36⅜ in wide, but needs a 35½ in opening: the front overlaps the cabinets by about 7/16 in on each side
Next to a wall: leave 2¾ in on the hinge side
KitchenAid allows an opening 35½ to 35¾ in wide.
24 in deep cabinets; the doors stand 1 3/4 in in front of the cabinets.

Check if it fits your space

Fit KBSD736SPS against your opening

Opening width (in)inThe space between the cabinets or walls on each side. Measure at the bottom, middle and top, and use the smallest.Opening height (in)inFrom the finished floor to the underside of the cabinet or ceiling above. Measure at the left, center and right, and use the smallest.Depth to the front edge of your countertop (in)inFrom the finished back wall to the front edge of the countertop beside the fridge. The fridge box and the gap behind it must fit within this; the doors and handles stand out in front.

How will it be installed? Doors stand in front (standard install) Panels overlap the cabinets (overlay install) Doors line up with cabinets (flush install)

How to measure your opening

Measurements stay in this tab’s session storage. They are not sent to analytics.

All measurements

Where each number comes from →

The fridge itself

Width	36⅜″92.4 cm
Width of the case, without doors	35″88.9 cm
Height to top of case	83¼″211 cm
Height to top of hinges	83¼″211 cm
Depth, case only	≈22⅜″56.9 cm
Depth with doors, no handles	≈25 13/16″65.6 cm
Depth with handles	27¾″70.5 cm

Gaps KitchenAid asks for

Each sideestimate	3/16″0.5 cm
Above	¾″1.9 cm
Behindcalculated	≈1⅝″4.1 cm
Hinge side, next to a wall (doors to 90°)	2¾″7.0 cm
Hinge side, door fully open	Not published

With the doors open

From the back wall to the front of the open doors (90°)	43¾″111 cm

calculated = worked out from KitchenAid's figures · estimate = not printed for this model; typical KitchenAid gap · Sources for every number · Report a wrong number

Similar side-by-side fridges

Electrolux GRSC2352AFNeeds 36⅝ × 70¼ in · 31 in deep Electrolux GRSS2652AFNeeds 36⅝ × 70¼ in · 35⅞ in deep Frigidaire FRSS2623ASNeeds 36⅝ × 70¼ in · 35 in deep Amana ASI2575GRSNeeds 36 × 69¾ in · 34⅛ in deep Whirlpool WRS315SDHMNeeds 36 × 70⅛ in · 33⅝ in deep Whirlpool WRS315SNHMNeeds 36 × 70⅛ in · 33⅝ in deep

More: Side-by-side refrigerators compared by fit and door clearance · Refrigerators that fit openings up to 36 inches wide

How we checked

Most sizes and gaps come from KitchenAid's documents for this model. The side gap isn't printed for this model, so it's an estimate from similar KitchenAid models. Not checked: delivery path, plumbing and power.

Every number with its source · How we verify

KitchenAid documents

Confirm current manufacturer specifications and installation requirements before purchase or installation. ExactFit does not evaluate every delivery-path, plumbing, electrical, trim, floor, or door-swing condition.