Midea MRT14D3BST and MRT14D3BWW dimensions and required opening

Name: Midea MRT14D3BST and MRT14D3BWW
Brand: Midea

28-inch classTop freezerStandard-depth

Same size in: MRT14D3BST (stainless), MRT14D3BWW (white)

Checked against Midea's documents, Sep 5, 2026

The opening it needs

Includes the gaps Midea asks for.

Width≈35 7/16″90.0 cm

Height≈64 9/16″164 cm

Depth≈29½″75.0 cm

The fridge is 27 9/16 in wide. The 35 7/16 in adds the 3 15/16 in of air space Midea asks for on each side
That room is for air to circulate, not part of the fridge. In a tighter space it can still slide in, but it may not cool as well
28¾ in deep with handles: sticks out past counters

Check if it fits your space

Fit MRT14D3BST against your opening

Opening width (in)inThe space between the cabinets or walls on each side. Measure at the bottom, middle and top, and use the smallest.Opening height (in)inFrom the finished floor to the underside of the cabinet or ceiling above. Measure at the left, center and right, and use the smallest.Depth to the front edge of your countertop (in)inFrom the finished back wall to the front edge of the countertop beside the fridge. The fridge box and the gap behind it must fit within this; the doors and handles stand out in front.

How to measure your opening

Measurements stay in this tab’s session storage. They are not sent to analytics.

All measurements

Where each number comes from →

The fridge itself

Width	≈27 9/16″70.0 cm
Height to top of case	≈60⅝″154 cm
Height to top of hinges	≈60⅝″154 cm
Depth, case only	≈25 9/16″65.0 cm
Depth with doors, no handles	≈28¾″73.1 cm
Depth with handles	≈28¾″73.1 cm

Gaps Midea asks for

Each sidecalculated	3 15/16″10.0 cm
Abovecalculated	3 15/16″10.0 cm
Behindcalculated	3 15/16″10.0 cm
Hinge side, next to a wall (doors to 90°)	Not published
Hinge side, door fully open	Not published

With the doors open

From the back wall to the front of the open doors (90°)calculated	≈53⅛″135 cm

calculated = worked out from Midea's figures · Sources for every number · Report a wrong number

Similar top freezer fridges

Midea MRT14D2BSTNeeds 35 7/16 × 64 9/16 in · 28¾ in deep Beko BFTF2715SSIMNeeds 31½ × 69¾ in · 28 9/16 in deep Beko BFTF2716SSNeeds 31½ × 70 15/16 in · 26⅜ in deep Beko BFTF2716SSIMNeeds 31½ × 70 15/16 in · 26⅜ in deep Beko BFTF2716SSIMENeeds 31½ × 70 15/16 in · 26⅜ in deep Beko BFTF2716WHIMNeeds 31½ × 70 15/16 in · 26⅜ in deep

More: Narrow refrigerators measured at 30 inches wide or less · Refrigerators that fit openings up to 36 inches wide · Refrigerators that fit under 65 inches tall

How we checked

Most sizes and gaps come from Midea's documents for this model. Not checked: delivery path, plumbing and power.

Every number with its source · How we verify · Why hinge height matters

Midea documents

Midea installation document — 105608406.pdf ↗

Confirm current manufacturer specifications and installation requirements before purchase or installation. ExactFit does not evaluate every delivery-path, plumbing, electrical, trim, floor, or door-swing condition.