Midea MRB19B7AST and MRB19B7AWW dimensions and required opening

Name: Midea MRB19B7AST and MRB19B7AWW
Brand: Midea

30-inch classBottom freezerStandard-depth

Same size in: MRB19B7AST (stainless), MRB19B7AWW (white)

Checked against Midea's documents, Sep 5, 2026

The opening it needs

Includes the gaps Midea asks for.

Width≈37⅜″95.0 cm

Height≈69⅝″177 cm

Depth≈30¾″78.1 cm

The fridge is 29½ in wide. The 37⅜ in adds the 3 in of air space Midea asks for on each side
That room is for air to circulate, not part of the fridge. In a tighter space it can still slide in, but it may not cool as well
30⅞ in deep with handles: sticks out past counters

Check if it fits your space

Fit MRB19B7AST against your opening

Opening width (in)inThe space between the cabinets or walls on each side. Measure at the bottom, middle and top, and use the smallest.Opening height (in)inFrom the finished floor to the underside of the cabinet or ceiling above. Measure at the left, center and right, and use the smallest.Depth to the front edge of your countertop (in)inFrom the finished back wall to the front edge of the countertop beside the fridge. The fridge box and the gap behind it must fit within this; the doors and handles stand out in front.

How to measure your opening

Measurements stay in this tab’s session storage. They are not sent to analytics.

All measurements

Where each number comes from →

The fridge itself

Width	≈29½″75.0 cm
Height to top of case	≈66⅝″169 cm
Height to top of hinges	≈66⅝″169 cm
Depth, case onlycalculated	≈27¾″70.5 cm
Depth with doors, no handles	30 29/32″78.5 cm
Depth with handles	30 29/32″78.5 cm

Gaps Midea asks for

Each sidecalculated	3″7.6 cm
Above	3″7.6 cm
Behindcalculated	3″7.6 cm
Hinge side, next to a wall (doors to 90°)	Not published
Hinge side, door fully open	Not published

With the doors open

From the back wall to the front of the open doors (90°)	58⅜″148 cm

calculated = worked out from Midea's figures · Sources for every number · Report a wrong number

Similar bottom freezer fridges

Midea MRB19B5ASTNeeds 37⅜ × 69⅝ in · 30⅞ in deep Maytag MBF1958FEZNeeds 30⅝ × 67½ in · 33⅜ in deep Amana ABB1924BRMNeeds 30⅝ × 67⅜ in · 33⅜ in deep KitchenAid KRBR130SPSNeeds 30⅝ × 67½ in · 33⅜ in deep Whirlpool WRB329DMBMNeeds 30⅝ × 67½ in · 33⅜ in deep Beko BBBF3019IMWENeeds 30 × 84 in · 26¾ in deep

More: Narrow refrigerators measured at 30 inches wide or less · Refrigerators that fit under 70 inches tall

How we checked

Most sizes and gaps come from Midea's documents for this model. Not checked: delivery path, plumbing and power.

Every number with its source · How we verify · Why hinge height matters

Midea documents

Confirm current manufacturer specifications and installation requirements before purchase or installation. ExactFit does not evaluate every delivery-path, plumbing, electrical, trim, floor, or door-swing condition.