KitchenAid KRFF136SPS dimensions and required opening

Name: KitchenAid KRFF136SPS
Brand: KitchenAid

36-inch classFrench doorStandard-depth

Also sold as KRFF136SPS07 and similar (same fridge).

Checked against KitchenAid's documents, Oct 31, 2026

The opening it needs

Includes the gaps KitchenAid asks for.

Width36⅞″93.7 cm

Height70⅝″179 cm

Depth30⅛″76.5 cm

35⅞ in wide, but needs 36⅞ in with the side gaps
The hinges make it 70⅛ in tall, not 68⅞ in
35½ in deep with handles: sticks out past counters
Next to a wall: leave 2½ in on the hinge side

Check if it fits your space

Fit KRFF136SPS against your opening

Opening width (in)inThe space between the cabinets or walls on each side. Measure at the bottom, middle and top, and use the smallest.Opening height (in)inFrom the finished floor to the underside of the cabinet or ceiling above. Measure at the left, center and right, and use the smallest.Depth to the front edge of your countertop (in)inFrom the finished back wall to the front edge of the countertop beside the fridge. The fridge box and the gap behind it must fit within this; the doors and handles stand out in front.

How to measure your opening

Measurements stay in this tab’s session storage. They are not sent to analytics.

All measurements

Where each number comes from →

The fridge itself

Width	35⅞″91.1 cm
Height to top of case	68⅞″175 cm
Height to top of hinges	70⅛″178 cm
Depth, case only	29⅛″74.0 cm
Depth with doors, no handles	33″83.8 cm
Depth with handles	35½″90.2 cm

Gaps KitchenAid asks for

Each sidecalculated	½″1.3 cm
Abovecalculated	½″1.3 cm
Behindcalculated	1″2.5 cm
Hinge side, next to a wall (doors to 90°)	2½″6.3 cm
Hinge side, door fully open	Not published

With the doors open

From the back wall to the front of the open doors (90°)	48⅛″122 cm

calculated = worked out from KitchenAid's figures · Sources for every number · Report a wrong number

Similar french door fridges

Frigidaire Gallery GRMC2273CFNeeds 36 7/16 × 70 9/16 in · 32 in deep KitchenAid KRFF436SPSNeeds 36 15/16 × 70 9/16 in · 37 7/16 in deep KitchenAid KRMF436SPSNeeds 36 13/16 × 70 9/16 in · 37 7/16 in deep Whirlpool WRFF3336SZNeeds 36 13/16 × 70 9/16 in · 36 13/16 in deep Whirlpool WRFF3536SVNeeds 36 13/16 × 70 9/16 in · 36 13/16 in deep Whirlpool WRFF3736SZNeeds 36 13/16 × 70 9/16 in · 36 13/16 in deep

More: French-door refrigerators compared by fit and door clearance · Refrigerators that fit under 72 inches tall

How we checked

Most sizes and gaps come from KitchenAid's documents for this model. Not checked: delivery path, plumbing and power.

Every number with its source · How we verify · Why hinge height matters

KitchenAid documents

Confirm current manufacturer specifications and installation requirements before purchase or installation. ExactFit does not evaluate every delivery-path, plumbing, electrical, trim, floor, or door-swing condition.