KitchenAid KRFC136TPA and KRFC136TPS dimensions and required opening

Name: KitchenAid KRFC136TPA and KRFC136TPS
Brand: KitchenAid

36-inch classFrench doorCounter-depth

Same size in: KRFC136TPA (panel-ready), KRFC136TPS (printshield stainless)

Also sold as KRFC136TPS07 and similar (same fridge).

Checked against KitchenAid's documents, Oct 31, 2026

The opening it needs

Includes the gaps KitchenAid asks for.

Width36¾″93.3 cm

Height72½″184 cm

Depth25⅝″65.1 cm

35¾ in wide, but needs 36¾ in with the side gaps
The hinges make it 72 in tall, not 71⅜ in
30¼ in deep with handles: the doors stand out past counters
Next to a wall: leave 2½ in on the hinge side

Check if it fits your space

Fit KRFC136TPS against your opening

Opening width (in)inThe space between the cabinets or walls on each side. Measure at the bottom, middle and top, and use the smallest.Opening height (in)inFrom the finished floor to the underside of the cabinet or ceiling above. Measure at the left, center and right, and use the smallest.Depth to the front edge of your countertop (in)inFrom the finished back wall to the front edge of the countertop beside the fridge. The fridge box and the gap behind it must fit within this; the doors and handles stand out in front.

How to measure your opening

Measurements stay in this tab’s session storage. They are not sent to analytics.

All measurements

Where each number comes from →

The fridge itself

Width	35¾″90.8 cm
Height to top of case	71⅜″181 cm
Height to top of hinges	72″183 cm
Depth, case only	24⅝″62.5 cm
Depth with doors, no handles	27¾″70.5 cm
Depth with handles	30¼″76.8 cm

Gaps KitchenAid asks for

Each sidecalculated	½″1.3 cm
Abovecalculated	½″1.3 cm
Behindcalculated	1″2.5 cm
Hinge side, next to a wall (doors to 90°)	2½″6.3 cm
Hinge side, door fully open	Not published

With the doors open

From the back wall to the front of the open doors (90°)	44⅛″112 cm

calculated = worked out from KitchenAid's figures · Sources for every number · Report a wrong number

Similar french door fridges

Beko BFFD3624SSNeeds 36¾ × 72 in · 29 11/16 in deep Beko BFFD3624XSSNeeds 37 × 71 11/16 in · 28⅞ in deep Beko BFFD3626SSNeeds 37 × 72 5/16 in · 29 in deep Bosch B36IT100NPNeeds 36 × 84 in · 25 in deep Cafe CFE28TP2MS1Needs 36 × 70⅞ in · 36¼ in deep Cafe CFE28TP3MD1Needs 36 × 70⅞ in · 36¼ in deep

More: Counter-depth refrigerators compared by actual dimensions · French-door refrigerators compared by fit and door clearance

How we checked

Most sizes and gaps come from KitchenAid's documents for this model. Not checked: delivery path, plumbing and power.

Every number with its source · How we verify

KitchenAid documents

Confirm current manufacturer specifications and installation requirements before purchase or installation. ExactFit does not evaluate every delivery-path, plumbing, electrical, trim, floor, or door-swing condition.