
KitchenAid KRBL130SPS dimensions and required opening
30-inch classBottom freezerStandard-depth
Also sold as KRBL130SPS07 and similar (same fridge).
Checked against KitchenAid's documents, Oct 31, 2026
The opening it needs
Includes the gaps KitchenAid asks for.
- 29¾ in wide, but needs 30¾ in with the side gaps
- The hinges make it 67 in tall, not 65½ in
- 33⅜ in deep with handles: sticks out past counters
- Next to a wall: leave 2½ in on the hinge side
Check if it fits your space
All measurements
Where each number comes from →The fridge itself
| Width | 29¾″75.6 cm |
|---|---|
| Height to top of case | 65½″166 cm |
| Height to top of hinges | 67″170 cm |
| Depth, case only | 28⅛″71.4 cm |
| Depth with doors, no handles | 30⅞″78.4 cm |
| Depth with handles | 33⅜″84.8 cm |
Gaps KitchenAid asks for
| Each sidecalculated | ½″1.3 cm |
|---|---|
| Abovecalculated | ½″1.3 cm |
| Behindcalculated | 1″2.5 cm |
| Hinge side, next to a wall (doors to 90°) | 2½″6.3 cm |
| Hinge side, door fully open | Not published |
With the doors open
| From the back wall to the front of the open doors (90°) | 59″150 cm |
|---|
calculated = worked out from KitchenAid's figures · Sources for every number · Report a wrong number
Similar bottom freezer fridges
More: Narrow refrigerators measured at 30 inches wide or less · Refrigerators that fit openings up to 32 inches wide · Refrigerators that fit under 68 inches tall
How we checked
Most sizes and gaps come from KitchenAid's documents for this model. Not checked: delivery path, plumbing and power.
Every number with its source · How we verify · Why hinge height matters
Confirm current manufacturer specifications and installation requirements before purchase or installation. ExactFit does not evaluate every delivery-path, plumbing, electrical, trim, floor, or door-swing condition.