KitchenAid KBSD742SPS

KitchenAid KBSD742SPS dimensions and required opening

42-inch classSide-by-sideBuilt-in

Also sold as KBSD742SPS07 and similar (same fridge).

Checked against KitchenAid's documents, Oct 29, 2026

The opening it needs

KitchenAid gives three cutouts for this model, depending on how it sits in your cabinets.

Width41½″105 cm
Height83¼″211 cm
Depth24″61.0 cm
  • 42⅜ in wide, but needs a 41½ in opening: the front overlaps the cabinets by about 7/16 in on each side
  • Next to a wall: leave 2¾ in on the hinge side
  • KitchenAid allows an opening 41½ to 41¾ in wide.
  • 24 in deep cabinets; the doors stand 1 3/4 in in front of the cabinets.
Check if it fits your space

Fit KBSD742SPS against your opening

How will it be installed?
How to measure your opening

Measurements stay in this tab’s session storage. They are not sent to analytics.

The fridge itself

Width42⅜″108 cm
Width of the case, without doors41 5/16″105 cm
Height to top of case83¼″211 cm
Height to top of hinges83¼″211 cm
Depth, case only≈22⅜″56.9 cm
Depth with doors, no handles25 13/16″65.6 cm
Depth with handles27 13/16″70.6 cm

Gaps KitchenAid asks for

Above¾″1.9 cm
Behindcalculated≈2⅝″6.6 cm
Hinge side, next to a wall (doors to 90°)2¾″7.0 cm
Hinge side, door fully openNot published

With the doors open

From the back wall to the front of the open doors (90°)47¼″120 cm

calculated = worked out from KitchenAid's figures · Sources for every number · Report a wrong number

Similar side-by-side fridges

More: Side-by-side refrigerators compared by fit and door clearance

How we checked

Most sizes and gaps come from KitchenAid's documents for this model. Not checked: delivery path, plumbing and power.

Every number with its source · How we verify

KitchenAid documents

Confirm current manufacturer specifications and installation requirements before purchase or installation. ExactFit does not evaluate every delivery-path, plumbing, electrical, trim, floor, or door-swing condition.