KitchenAid KBSN748SBE, KBSN748SJP and KBSN748SPS dimensions and required opening

Name: KitchenAid KBSN748SBE, KBSN748SJP and KBSN748SPS
Brand: KitchenAid

48-inch classSide-by-sideBuilt-in

Same size in: KBSN748SBE (black stainless), KBSN748SJP (stainless), KBSN748SPS (printshield stainless)

Also sold as KBSN748SPS07 and similar (same fridge).

Checked against KitchenAid's documents, Oct 29, 2026

The opening it needs

KitchenAid gives three cutouts for this model, depending on how it sits in your cabinets.

Width47½″121 cm

Height83¼″211 cm

Depth24″61.0 cm

Next to a wall: leave 2¾ in on the hinge side
KitchenAid allows an opening 47½ to 47¾ in wide.
24 in deep cabinets; the doors stand 1 3/4 in in front of the cabinets.

Check if it fits your space

Fit KBSN748SPS against your opening

Opening width (in)inThe space between the cabinets or walls on each side. Measure at the bottom, middle and top, and use the smallest.Opening height (in)inFrom the finished floor to the underside of the cabinet or ceiling above. Measure at the left, center and right, and use the smallest.Depth to the front edge of your countertop (in)inFrom the finished back wall to the front edge of the countertop beside the fridge. The fridge box and the gap behind it must fit within this; the doors and handles stand out in front.

How will it be installed? Doors stand in front (standard install) Panels overlap the cabinets (overlay install) Doors line up with cabinets (flush install)

How to measure your opening

Measurements stay in this tab’s session storage. They are not sent to analytics.

All measurements

Where each number comes from →

The fridge itself

Width	47 3/16″120 cm
Height to top of case	83¼″211 cm
Height to top of hinges	83¼″211 cm
Depth, case only	≈22⅜″56.9 cm
Depth with doors, no handles	25 13/16″65.6 cm
Depth with handles	27 13/16″70.6 cm

Gaps KitchenAid asks for

Above	¾″1.9 cm
Behindcalculated	≈2⅝″6.6 cm
Hinge side, next to a wall (doors to 90°)	2¾″7.0 cm
Hinge side, door fully open	Not published

With the doors open

From the back wall to the front of the open doors (90°)	50¾″129 cm

calculated = worked out from KitchenAid's figures · Sources for every number · Report a wrong number

Similar side-by-side fridges

KitchenAid KBSD748SPSNeeds 47½ × 83¼ in · 27 13/16 in deep KitchenAid KBSN748TPANeeds 48 × 84 in · 24 in deep Cafe CSB48WP2NS1Needs 47½ × 83½ in · 28½ in deep Cafe CSB48YP2NS1Needs 47½ × 83½ in · 28½ in deep GE Profile PSB48YSNSSNeeds 47½ × 83½ in · 28⅜ in deep Monogram ZIS480NNIINeeds 47½ × 84 in · 28 5/16 in deep

More: Side-by-side refrigerators compared by fit and door clearance

How we checked

Most sizes and gaps come from KitchenAid's documents for this model. Not checked: delivery path, plumbing and power.

Every number with its source · How we verify

KitchenAid documents

Confirm current manufacturer specifications and installation requirements before purchase or installation. ExactFit does not evaluate every delivery-path, plumbing, electrical, trim, floor, or door-swing condition.