Miele KWT2662SFSSS dimensions and required opening

Name: Miele KWT2662SFSSS
Brand: Miele

24-inch classSingle door refrigeratorBuilt-in

Checked against Miele's documents, Sep 17, 2026

The opening it needs

Includes the gaps Miele asks for.

Width24″61.0 cm

Height84″213 cm

Depth24″61.0 cm

23¾ in wide, but needs 24 in with the side gaps
Next to a wall: leave ⅜ in on the hinge side

Check if it fits your space

Fit KWT2662SFSSS against your opening

Opening width (in)inThe space between the cabinets or walls on each side. Measure at the bottom, middle and top, and use the smallest.Opening height (in)inFrom the finished floor to the underside of the cabinet or ceiling above. Measure at the left, center and right, and use the smallest.Depth to the front edge of your countertop (in)inFrom the finished back wall to the front edge of the countertop beside the fridge. The fridge box and the gap behind it must fit within this; the doors and handles stand out in front.

How to measure your opening

Measurements stay in this tab’s session storage. They are not sent to analytics.

All measurements

Where each number comes from →

The fridge itself

Width	23¾″60.3 cm
Height to top of case	83¾″213 cm
Height to top of hinges	83¾″213 cm
Depth, case only	24″61.0 cm
Depth with doors, no handles	24″61.0 cm
Depth with handlescalculated	25″63.5 cm

Gaps Miele asks for

Each sidecalculated	⅛″0.3 cm
Abovecalculated	¼″0.6 cm
Behindcalculated	0″0.0 cm
Hinge side, next to a wall (doors to 90°)	⅜″1.0 cm
Hinge side, door fully open	Not published

With the doors open

From the back wall to the front of the open doors (90°)calculated	50⅝″129 cm

calculated = worked out from Miele's figures · Sources for every number · Report a wrong number

How we checked

Most sizes and gaps come from Miele's documents for this model. Not checked: delivery path, plumbing and power.

Every number with its source · How we verify

Miele documents

Confirm current manufacturer specifications and installation requirements before purchase or installation. ExactFit does not evaluate every delivery-path, plumbing, electrical, trim, floor, or door-swing condition.