GE GTE19JSNRSS dimensions and required opening

Name: GE GTE19JSNRSS
Brand: GE

30-inch classTop freezerStandard-depth

Checked against GE's documents, Sep 17, 2026

The opening it needs

Includes the gaps GE asks for.

Width30″76.2 cm

Height67⅜″171 cm

Depth30⅜″77.2 cm

29¾ in wide, but needs 30 in with the side gaps
The hinges make it 66⅜ in tall, not 65⅞ in
34½ in deep with handles: sticks out past counters
Next to a wall: leave 2⅝ in on the hinge side

Check if it fits your space

Fit GTE19JSNRSS against your opening

Opening width (in)inThe space between the cabinets or walls on each side. Measure at the bottom, middle and top, and use the smallest.Opening height (in)inFrom the finished floor to the underside of the cabinet or ceiling above. Measure at the left, center and right, and use the smallest.Depth to the front edge of your countertop (in)inFrom the finished back wall to the front edge of the countertop beside the fridge. The fridge box and the gap behind it must fit within this; the doors and handles stand out in front.

How to measure your opening

Measurements stay in this tab’s session storage. They are not sent to analytics.

All measurements

Where each number comes from →

The fridge itself

Width	29¾″75.6 cm
Height to top of case	65⅞″167 cm
Height to top of hinges	66⅜″169 cm
Depth, case only	28⅜″72.1 cm
Depth with doors, no handles	32⅛″81.6 cm
Depth with handles	34½″87.6 cm

Gaps GE asks for

Each side	⅛″0.3 cm
Above	1″2.5 cm
Behind	2″5.1 cm
Hinge side, next to a wall (doors to 90°)calculated	2⅝″6.7 cm
Hinge side, door fully open	Not published

With the doors open

From the back wall to the front of the open doors (90°)	60½″154 cm

calculated = worked out from GE's figures · Sources for every number · Report a wrong number

Similar top freezer fridges

GE GTE19DTNRBBNeeds 30 × 67⅜ in · 34½ in deep GE GTE19JTNRBBNeeds 30 × 67⅜ in · 34½ in deep GE GTS19KGNRBBNeeds 30 × 67⅜ in · 34½ in deep Midea MRT21D3BBBNeeds 37⅝ × 70 9/16 in · 32 11/16 in deep Kenmore 46-61345Needs 36⅛ × 69 5/16 in · 30⅛ in deep Kenmore 46-61355Needs 36⅛ × 72 in · 31 11/16 in deep

More: Narrow refrigerators measured at 30 inches wide or less · Refrigerators that fit openings up to 30 inches wide · Refrigerators that fit under 68 inches tall

How we checked

Most sizes and gaps come from GE's documents for this model. Not checked: delivery path, plumbing and power.

Every number with its source · How we verify · Why hinge height matters

GE documents

Confirm current manufacturer specifications and installation requirements before purchase or installation. ExactFit does not evaluate every delivery-path, plumbing, electrical, trim, floor, or door-swing condition.