Measurement evidence for JennAir JBSFS42NMX

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to JennAir JBSFS42NMX fit check Check this model against your opening How ExactFit verifies measurements

JennAir JBSFS42NMX

Built-in Side-by-side · Unknown depth class
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Complete mixed evidence

4exact-model manufacturer values

0verified equivalent/same-chassis values

12secondary-source-only values

0values with unresolved source details

Last reviewed: 2026-09-05. 5 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	42.375 in	✓ Conflicting sources — resolved	JennAir JBSFS42NMX Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 42.375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence JennAir JBSFS42NMX Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 JennAir shared 42/48 panel-ready side-by-side dimension guide. Open original source ↗ Why this value was used JennAir shared 42/48 panel-ready side-by-side dimension guide. Other evidence found 42 in — superseded 90391074.pdf; page 3. Model scope: not separately recorded. Raw value: Aligned with case_width_in (42.0"). The final reviewed registry supersedes this earlier audit value. JennAir shared 42/48 panel-ready side-by-side dimension guide. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	83.12 in	✓ Conflicting sources — resolved	Panel-Ready 42" Built-In Side-By-Side Refrigerator \| JennAir JennAir	Retained specification excerpt: Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 83.12 in. Context: 75 in
Value used by ExactFit 83.12 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Panel-Ready 42" Built-In Side-By-Side Refrigerator \| JennAir JennAir · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 83.12 in. Context: 75 in Reviewed: 2026-09-04 Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 83.12 in. Context: 75 in Freezer Capacity Volume 9.2 cu. ft. Gross Weight 601 lbs Height 83.125 in Height To Top Of Cabinet 83.125 in Net Weight 555 lbs Refrigerator Capacity Volume 16.3 Total Refrigerator Capacit Open original source ↗ Why this value was used Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 83.12 in. Context: 75 in Freezer Capacity Volume 9.2 cu. ft. Gross Weight 601 lbs Height 83.125 in Height To Top Of Cabinet 83.125 in Net Weight 555 lbs Refrigerator Capacity Volume 16.3 Total Refrigerator Capacit Other evidence found 71 in — superseded 90391074.pdf; page 4. Model scope: not separately recorded. Raw value: JennAir shared 42/48 panel-ready side-by-side dimension guide.. The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 83.12 in. Context: 75 in Freezer Capacity Volume 9.2 cu. ft. Gross Weight 601 lbs Height 83.125 in Height To Top Of Cabinet 83.125 in Net Weight 555 lbs Refrigerator Capacity Volume 16.3 Total Refrigerator Capacit Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	83.4375 in	✓ Conflicting sources — resolved	JennAir JBSFS42NMX Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 83.4375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence JennAir JBSFS42NMX Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 JennAir shared 42/48 panel-ready side-by-side dimension guide. Open original source ↗ Why this value was used JennAir shared 42/48 panel-ready side-by-side dimension guide. Other evidence found 83.125 in — superseded https://www.jennair.com/refrigeration/built-in-refrigerators/p.panel-ready-42-built-in-side-by-side-refrigerator.jbsfs42nmx.html; location not retained. Model scope: not separately recorded. Raw value: Official exact-model product-page Dimensions block: Height = 83.125 in. The final reviewed registry supersedes this earlier audit value. JennAir shared 42/48 panel-ready side-by-side dimension guide. Open alternative source ↗ Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	22.375 in	✓ Secondary source only	JennAir JBSFS42NMX Dimension Guide assets.skulytics.io	Page 3
Value used by ExactFit 22.375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence JennAir JBSFS42NMX Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 3 Reviewed: 2026-09-04 JennAir shared 42/48 panel-ready side-by-side dimension guide. Open original source ↗ Why this value was used JennAir shared 42/48 panel-ready side-by-side dimension guide. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	24 in	✓ Secondary source only	JennAir JBSFS42NMX Dimension Guide assets.skulytics.io	Page 3
Value used by ExactFit 24 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence JennAir JBSFS42NMX Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 3 Reviewed: 2026-09-04 JennAir shared 42/48 panel-ready side-by-side dimension guide. Open original source ↗ Why this value was used JennAir shared 42/48 panel-ready side-by-side dimension guide. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	25 in	✓ Secondary source only · Calculated/inferred	JennAir JBSFS42NMX Dimension Guide assets.skulytics.io	Page 3
Value used by ExactFit 25 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: 24-in door depth + standard 1-in custom handle Confidence label: medium. Primary evidence JennAir JBSFS42NMX Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 3 Reviewed: 2026-09-04 NMX is panel-ready; custom handle projection standardized to 1 in. Open original source ↗ Why this value was used NMX is panel-ready; custom handle projection standardized to 1 in. Calculation or inference: 24-in door depth + standard 1-in custom handle. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	46.75 in	✓ Secondary source only	JennAir JBSFS42NMX Dimension Guide assets.skulytics.io	Page 3
Value used by ExactFit 46.75 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence JennAir JBSFS42NMX Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 3 Reviewed: 2026-09-04 JennAir shared 42/48 panel-ready side-by-side dimension guide. Open original source ↗ Why this value was used JennAir shared 42/48 panel-ready side-by-side dimension guide. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	42 in	✓ Secondary source only	JennAir JBSFS42NMX Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 42 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence JennAir JBSFS42NMX Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 JennAir shared 42/48 panel-ready side-by-side dimension guide. Open original source ↗ Why this value was used JennAir shared 42/48 panel-ready side-by-side dimension guide. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	83.5625 in	✓ Secondary source only · Calculated/inferred	JennAir measurement source — https://www.jennair.com/content/dam/global/documents/202309/installation-insruction-w11686647-revA.pdf JennAir	Page 8
Value used by ExactFit 83.5625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence JennAir measurement source — https://www.jennair.com/content/dam/global/documents/202309/installation-insruction-w11686647-revA.pdf JennAir · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-05 Minimum opening height derived from highest stored appliance endpoint 83.4375 in plus documented top clearance 0.125 in. Open original source ↗ Why this value was used Minimum opening height derived from highest stored appliance endpoint 83.4375 in plus documented top clearance 0.125 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	23.375 in	✓ Secondary source only · Calculated/inferred	JennAir measurement source — https://www.jennair.com/content/dam/global/documents/202304/dimension-guide-w11576983-revD.pdf JennAir	Page 4
Value used by ExactFit 23.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence JennAir measurement source — https://www.jennair.com/content/dam/global/documents/202304/dimension-guide-w11576983-revD.pdf JennAir · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 Minimum opening depth derived from case-only depth 22.375 in plus documented rear clearance 1.0 in. Open original source ↗ Why this value was used Minimum opening depth derived from case-only depth 22.375 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	0.5 in	✓ Verified — exact model · Calculated/inferred	JennAir measurement source — https://www.jennair.com/content/dam/global/documents/202304/dimension-guide-w11576983-revD.pdf JennAir	Page 4
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern JBSFS42NMX Confidence label: medium. Primary evidence JennAir measurement source — https://www.jennair.com/content/dam/global/documents/202304/dimension-guide-w11576983-revD.pdf JennAir · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 1/2" of space on each side Open original source ↗ Why this value was used 1/2" of space on each side Calculation or inference: documented DOE model pattern JBSFS42NMX. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	0.5 in	✓ Verified — exact model · Calculated/inferred	JennAir measurement source — https://www.jennair.com/content/dam/global/documents/202304/dimension-guide-w11576983-revD.pdf JennAir	Page 4
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern JBSFS42NMX Confidence label: medium. Primary evidence JennAir measurement source — https://www.jennair.com/content/dam/global/documents/202304/dimension-guide-w11576983-revD.pdf JennAir · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 1/2" of space on each side Open original source ↗ Why this value was used 1/2" of space on each side Calculation or inference: documented DOE model pattern JBSFS42NMX. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	0.125 in	✓ Verified — exact model · Calculated/inferred	JennAir measurement source — https://www.jennair.com/content/dam/global/documents/202309/installation-insruction-w11686647-revA.pdf JennAir	Page 8
Value used by ExactFit 0.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern JBSFS42NMX Confidence label: medium. Primary evidence JennAir measurement source — https://www.jennair.com/content/dam/global/documents/202309/installation-insruction-w11686647-revA.pdf JennAir · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-05 1/8" of open space above the refrigerator Open original source ↗ Why this value was used 1/8" of open space above the refrigerator Calculation or inference: documented DOE model pattern JBSFS42NMX. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	1 in	✓ Verified — exact model · Calculated/inferred	JennAir measurement source — https://www.jennair.com/content/dam/global/documents/202304/dimension-guide-w11576983-revD.pdf JennAir	Page 4
Value used by ExactFit 1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern JBSFS42NMX Confidence label: medium. Primary evidence JennAir measurement source — https://www.jennair.com/content/dam/global/documents/202304/dimension-guide-w11576983-revD.pdf JennAir · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 1" of space behind Open original source ↗ Why this value was used 1" of space behind Calculation or inference: documented DOE model pattern JBSFS42NMX. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	2 in	✓ Secondary source only	JennAir measurement source — cf0db544038d963ee01aa8dce8b7ae17fb87f1437e0fc3e78c85bdacbdfba48f.pdf files.bbystatic.com	Page 4
Value used by ExactFit 2 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence JennAir measurement source — cf0db544038d963ee01aa8dce8b7ae17fb87f1437e0fc3e78c85bdacbdfba48f.pdf files.bbystatic.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 next to a fixed wall, leave a 2" (5.08 cm Open original source ↗ Why this value was used next to a fixed wall, leave a 2" (5.08 cm Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	41 in	✓ Conflicting sources — resolved	JennAir JBSFS42NMX Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 41 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence JennAir JBSFS42NMX Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 JennAir shared 42/48 panel-ready side-by-side dimension guide. Open original source ↗ Why this value was used JennAir shared 42/48 panel-ready side-by-side dimension guide. Other evidence found 42 in — superseded 90391074.pdf; page 3. Model scope: not separately recorded. Raw value: Cabinet Width 42". The final reviewed registry supersedes this earlier audit value. JennAir shared 42/48 panel-ready side-by-side dimension guide. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	2 in	✓ Conflicting sources — resolved	JennAir JBSFS42NMX Dimension Guide assets.skulytics.io	Page 4
Value used by ExactFit 2 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence JennAir JBSFS42NMX Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-04 JennAir shared 42/48 panel-ready side-by-side dimension guide. Open original source ↗ Why this value was used JennAir shared 42/48 panel-ready side-by-side dimension guide. Other evidence found 0.5 in — superseded 90391074.pdf; page 4. Model scope: not separately recorded. Raw value: allow for 1/2" (1.27 cm) of space on each side. The final reviewed registry supersedes this earlier audit value. JennAir shared 42/48 panel-ready side-by-side dimension guide. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Overall width

Selected: 42.375 in. Earlier retained values: 42 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

JennAir shared 42/48 panel-ready side-by-side dimension guide.

View source scope, location, and impact on fit

Cabinet height

Selected: 83.12 in. Earlier retained values: 71 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 83.12 in. Context: 75 in Freezer Capacity Volume 9.2 cu. ft. Gross Weight 601 lbs Height 83.125 in Height To Top Of Cabinet 83.125 in Net Weight 555 lbs Refrigerator Capacity Volume 16.3 Total Refrigerator Capacit

View source scope, location, and impact on fit

Height with hinge / controlling height

Selected: 83.4375 in. Earlier retained values: 83.125 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

JennAir shared 42/48 panel-ready side-by-side dimension guide.

View source scope, location, and impact on fit

Cabinet case width

Selected: 41 in. Earlier retained values: 42 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

JennAir shared 42/48 panel-ready side-by-side dimension guide.

View source scope, location, and impact on fit

Adjoining-wall clearance (reviewed endpoint)

Selected: 2 in. Earlier retained values: 0.5 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

JennAir shared 42/48 panel-ready side-by-side dimension guide.

View source scope, location, and impact on fit

Source documents and pages

JennAir JBSFS42NMX Dimension Guide

assets.skulytics.io · Dimension Guide · secondary model/source

Model numbers covered: JBSFS42NMX. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

9 displayed measurements supported: Overall width; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Minimum cutout width; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).