Measurement evidence for Whirlpool WRTX7421TZ

Value used by ExactFit

32.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.whirlpool-33-inch-wide-top-freezer-refrigerator-with-total-coverage-cooling-21.3-cu.-ft.wrtx7421tz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width 32.5 in
Reviewed: 2026-09-04

Cabinet Width 32.5 in

Why this value was used

Cabinet Width 32.5 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 7a0a92cf4a66f28791a47272e513772470a5d0b213f0bf1219a3e6c689313127.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Printed B, height to top of cabinet: 65 1/2 in (166.4 cm). Replaces the rounded web value. Owner decision 2026-10-21: whirlpool.com's product page for this model links this sheet (dimension-guide-w11821750-revb) as its dimension guide, although the header names only WRTX7421TW***.

Why this value was used

Printed B, height to top of cabinet: 65 1/2 in (166.4 cm). Replaces the rounded web value. Owner decision 2026-10-21: whirlpool.com's product page for this model links this sheet (dimension-guide-w11821750-revb) as its dimension guide, although the header names only WRTX7421TW***.

Other evidence found

• 65.313 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Cabinet 65.313 in. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 7a0a92cf4a66f28791a47272e513772470a5d0b213f0bf1219a3e6c689313127.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Printed A, overall height: 66 1/4 in (168.3 cm). Replaces the rounded web value. Owner decision 2026-10-21: whirlpool.com's product page for this model links this sheet (dimension-guide-w11821750-revb) as its dimension guide, although the header names only WRTX7421TW***.

Why this value was used

Printed A, overall height: 66 1/4 in (168.3 cm). Replaces the rounded web value. Owner decision 2026-10-21: whirlpool.com's product page for this model links this sheet (dimension-guide-w11821750-revb) as its dimension guide, although the header names only WRTX7421TW***.

Other evidence found

• 66 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Door Hinge 66 in. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

27.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 7a0a92cf4a66f28791a47272e513772470a5d0b213f0bf1219a3e6c689313127.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Printed E, depth of cabinet only: 27 7/8 in (70.7 cm). Replaces the rounded web value. Owner decision 2026-10-21: whirlpool.com's product page for this model links this sheet (dimension-guide-w11821750-revb) as its dimension guide, although the header names only WRTX7421TW***.

Why this value was used

Printed E, depth of cabinet only: 27 7/8 in (70.7 cm). Replaces the rounded web value. Owner decision 2026-10-21: whirlpool.com's product page for this model links this sheet (dimension-guide-w11821750-revb) as its dimension guide, although the header names only WRTX7421TW***.

Other evidence found

• 27.813 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Depth Excluding Doors 27.813 in. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.875 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.whirlpool-33-inch-wide-top-freezer-refrigerator-with-total-coverage-cooling-21.3-cu.-ft.wrtx7421tz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Excluding Handles 31.875 in
Reviewed: 2026-09-04

Depth Closed Excluding Handles 31.875 in

Why this value was used

Depth Closed Excluding Handles 31.875 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.9375 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.whirlpool-33-inch-wide-top-freezer-refrigerator-with-total-coverage-cooling-21.3-cu.-ft.wrtx7421tz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 33.938 in is the same printed dimension as 33 15/16 in (3
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 33.938 in is the same printed dimension as 33 15/16 in (33.9375); every finish of the WRTX7421T family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 33.938 in is the same printed dimension as 33 15/16 in (33.9375); every finish of the WRTX7421T family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 33.938 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Depth Closed Including Handles 33.938 in. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

61.875 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.whirlpool-33-inch-wide-top-freezer-refrigerator-with-total-coverage-cooling-21.3-cu.-ft.wrtx7421tz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth With Door Open 90 Degree 61.875 in
Reviewed: 2026-09-04

Depth With Door Open 90 Degree 61.875 in

Why this value was used

Depth With Door Open 90 Degree 61.875 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.whirlpool-33-inch-wide-top-freezer-refrigerator-with-total-coverage-cooling-21.3-cu.-ft.wrtx7421tz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cutout Width = 33.5 in | t Width 32.5 in Capacity 21.3 cu. ft. Common Size 33 in Cutout Height 66.81
Reviewed: 2026-09-04

Cutout Width = 33.5 in | t Width 32.5 in Capacity 21.3 cu. ft. Common Size 33 in Cutout Height 66.813 in Cutout Width 33.5 in Depth 33.9375 in Depth Closed Excluding Handles 31.875 in Depth Closed Includin

Why this value was used

Cutout Width = 33.5 in | t Width 32.5 in Capacity 21.3 cu. ft. Common Size 33 in Cutout Height 66.813 in Cutout Width 33.5 in Depth 33.9375 in Depth Closed Excluding Handles 31.875 in Depth Closed Includin

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.813 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool measurement source — WRTX7421TZ.html
www.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cutout Height: 66.813 in
Reviewed: 2026-09-05

Cutout Height: 66.813 in

Why this value was used

Cutout Height: 66.813 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — dimension-guide-w11821750-revb.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-21

Recalculated 2026-10-21 with the stored formula from current inputs: depth_case_only_in + rear_clearance_in with depth_case_only_in = 27.875, rear_clearance_in = 1 = 28.875 in (previously 28.813 in).

Why this value was used

Recalculated 2026-10-21 with the stored formula from current inputs: depth_case_only_in + rear_clearance_in with depth_case_only_in = 27.875, rear_clearance_in = 1 = 28.875 in (previously 28.813 in). Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

• 28.813 in — superseded

  The same document as the value used above; page 2. Model scope: not separately recorded. Raw value: Whirlpool opening envelope: 27.813 + 1.0 = 28.813 in.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool measurement source — 105518640.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-29

The document this model's measurements come from states: "allow a 1/2" (1.27 cm) space on each side and between overhead cabinets."

Why this value was used

The document this model's measurements come from states: "allow a 1/2" (1.27 cm) space on each side and between overhead cabinets."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool measurement source — 105518640.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-29

The document this model's measurements come from states: "allow a 1/2" (1.27 cm) space on each side and between overhead cabinets."

Why this value was used

The document this model's measurements come from states: "allow a 1/2" (1.27 cm) space on each side and between overhead cabinets."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: WRTX7421 finish-family scope; TB/TW exact family document

Confidence label: medium.

Primary evidence

Whirlpool measurement source — dimension-guide-w11821750-revb.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Allow 1/2" (1.25 cm) between overhead cabinets and refrigerator top.

Why this value was used

Allow 1/2" (1.25 cm) between overhead cabinets and refrigerator top. Calculation or inference: WRTX7421 finish-family scope; TB/TW exact family document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: WRTX7421 finish-family scope; TB/TW exact family document

Confidence label: medium.

Primary evidence

Whirlpool measurement source — dimension-guide-w11821750-revb.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Allow at least 1" (2.5 cm) between back of cabinet and the wall.

Why this value was used

Allow at least 1" (2.5 cm) between back of cabinet and the wall. Calculation or inference: WRTX7421 finish-family scope; TB/TW exact family document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 7a0a92cf4a66f28791a47272e513772470a5d0b213f0bf1219a3e6c689313127.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-21

If you are installing your refrigerator next to a fixed wall, leave 2" (5 cm) minimum on the hinge side (depending on your model) to allow for the door to swing open. Same value as WRTX7421TW. Owner decision 2026-10-21: whirlpool.com's product page for this model links this sheet (dimension-guide-w11821750-revb) as its dimension guide, although the header names only WRTX7421TW***.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

If you are installing your refrigerator next to a fixed wall, leave 2" (5 cm) minimum on the hinge side (depending on your model) to allow for the door to swing open. Same value as WRTX7421TW. Owner decision 2026-10-21: whirlpool.com's product page for this model links this sheet (dimension-guide-w11821750-revb) as its dimension guide, although the header names only WRTX7421TW***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.5 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.whirlpool-33-inch-wide-top-freezer-refrigerator-with-total-coverage-cooling-21.3-cu.-ft.wrtx7421tz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width = 32.5 in | ol No Sabbath Mode No Temperature Range 32-45F / -10-21F Freezer ### Dimen
Reviewed: 2026-09-04

Cabinet Width = 32.5 in | ol No Sabbath Mode No Temperature Range 32-45F / -10-21F Freezer ### Dimensions Cabinet Width 32.5 in Capacity 21.3 cu. ft. Common Size 33 in Cutout Height 66.813 in Cutout Width 33

Why this value was used

Cabinet Width = 32.5 in | ol No Sabbath Mode No Temperature Range 32-45F / -10-21F Freezer ### Dimensions Cabinet Width 32.5 in Capacity 21.3 cu. ft. Common Size 33 in Cutout Height 66.813 in Cutout Width 33

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.