This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Top Freezer · Standard-depth
Market status: Active (recorded 2026-08-17)
Last reviewed: 2026-10-22. 3 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | 33 in | ? Verified — finalized database measurement | Whirlpool measurement source — 5ff588e35a1280aaec9d74ddd99735b0ab289add0eb094078fb8e4532e33f3ef.html Publisher not recorded | Page 1 | |
Value used by ExactFit33 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceWhirlpool measurement source — 5ff588e35a1280aaec9d74ddd99735b0ab289add0eb094078fb8e4532e33f3ef.html Whirlpool learnwhirlpool.com infosheet WRTX5421T (brand partner sheet): "Dimensions: h: 66.0625" w: 33" d: 31.875"". Overall width; no separate cabinet width is printed. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedWhirlpool learnwhirlpool.com infosheet WRTX5421T (brand partner sheet): "Dimensions: h: 66.0625" w: 33" d: 31.875"". Overall width; no separate cabinet width is printed. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | 65.31 in | ? Verified — finalized database measurement | Whirlpool measurement source — 85b9c65f588e4b9e5f6c494e91418fb38795402bc86b979b5abf09159f081e0e.html Publisher not recorded | Page 1 | |
Value used by ExactFit65.31 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceWhirlpool measurement source — 85b9c65f588e4b9e5f6c494e91418fb38795402bc86b979b5abf09159f081e0e.html Town Appliance product page for Whirlpool WRTX5421TZ (saved 2026-10-22), Specifications > Dimensions, Whirlpool spec feed: "Height To Top of Cabinet 65.31". Medium confidence: retailer copy of Whirlpool's spec feed; Whirlpool publishes no dimension guide for this model (owner decision 2026-10-22). The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedTown Appliance product page for Whirlpool WRTX5421TZ (saved 2026-10-22), Specifications > Dimensions, Whirlpool spec feed: "Height To Top of Cabinet 65.31". Medium confidence: retailer copy of Whirlpool's spec feed; Whirlpool publishes no dimension guide for this model (owner decision 2026-10-22). Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 66.0625 in | ? Verified — finalized database measurement | Whirlpool measurement source — 5ff588e35a1280aaec9d74ddd99735b0ab289add0eb094078fb8e4532e33f3ef.html Publisher not recorded | Page 1 | |
Value used by ExactFit66.0625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceWhirlpool measurement source — 5ff588e35a1280aaec9d74ddd99735b0ab289add0eb094078fb8e4532e33f3ef.html Whirlpool learnwhirlpool.com infosheet WRTX5421T (brand partner sheet): overall height h: 66.0625". The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedWhirlpool learnwhirlpool.com infosheet WRTX5421T (brand partner sheet): overall height h: 66.0625". Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | 27.81 in | ? Verified — finalized database measurement | Whirlpool measurement source — 85b9c65f588e4b9e5f6c494e91418fb38795402bc86b979b5abf09159f081e0e.html Publisher not recorded | Page 1 | |
Value used by ExactFit27.81 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceWhirlpool measurement source — 85b9c65f588e4b9e5f6c494e91418fb38795402bc86b979b5abf09159f081e0e.html Town Appliance product page for Whirlpool WRTX5421TZ (saved 2026-10-22), Specifications > Dimensions, Whirlpool spec feed: "Depth Excluding Doors 27.81". Medium confidence: retailer copy of Whirlpool's spec feed; Whirlpool publishes no dimension guide for this model (owner decision 2026-10-22). The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedTown Appliance product page for Whirlpool WRTX5421TZ (saved 2026-10-22), Specifications > Dimensions, Whirlpool spec feed: "Depth Excluding Doors 27.81". Medium confidence: retailer copy of Whirlpool's spec feed; Whirlpool publishes no dimension guide for this model (owner decision 2026-10-22). Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 31.875 in | ? Verified — finalized database measurement | Whirlpool measurement source — 85b9c65f588e4b9e5f6c494e91418fb38795402bc86b979b5abf09159f081e0e.html Publisher not recorded | Page 1 | |
Value used by ExactFit31.875 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceWhirlpool measurement source — 85b9c65f588e4b9e5f6c494e91418fb38795402bc86b979b5abf09159f081e0e.html Town Appliance product page for Whirlpool WRTX5421TZ (saved 2026-10-22), Specifications > Dimensions, Whirlpool spec feed: "Depth Closed Excluding Handles 31.88"; Whirlpool infosheet prints d: 31.875". Medium confidence: retailer copy of Whirlpool's spec feed; Whirlpool publishes no dimension guide for this model (owner decision 2026-10-22). The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedTown Appliance product page for Whirlpool WRTX5421TZ (saved 2026-10-22), Specifications > Dimensions, Whirlpool spec feed: "Depth Closed Excluding Handles 31.88"; Whirlpool infosheet prints d: 31.875". Medium confidence: retailer copy of Whirlpool's spec feed; Whirlpool publishes no dimension guide for this model (owner decision 2026-10-22). Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 31.875 in | ? Verified — finalized database measurement | Whirlpool measurement source — 5ff588e35a1280aaec9d74ddd99735b0ab289add0eb094078fb8e4532e33f3ef.html Publisher not recorded | Page 1 | |
Value used by ExactFit31.875 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceWhirlpool measurement source — 5ff588e35a1280aaec9d74ddd99735b0ab289add0eb094078fb8e4532e33f3ef.html Whirlpool learnwhirlpool.com infosheet WRTX5421T (brand partner sheet): overall depth d: 31.875". The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedWhirlpool learnwhirlpool.com infosheet WRTX5421T (brand partner sheet): overall depth d: 31.875". Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 61.88 in | ? Verified — finalized database measurement | Whirlpool measurement source — 85b9c65f588e4b9e5f6c494e91418fb38795402bc86b979b5abf09159f081e0e.html Publisher not recorded | Page 1 | |
Value used by ExactFit61.88 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceWhirlpool measurement source — 85b9c65f588e4b9e5f6c494e91418fb38795402bc86b979b5abf09159f081e0e.html Town Appliance product page for Whirlpool WRTX5421TZ (saved 2026-10-22), Specifications > Dimensions, Whirlpool spec feed: "Depth With Door Open 90 Degree 61.88". Medium confidence: retailer copy of Whirlpool's spec feed; Whirlpool publishes no dimension guide for this model (owner decision 2026-10-22). The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedTown Appliance product page for Whirlpool WRTX5421TZ (saved 2026-10-22), Specifications > Dimensions, Whirlpool spec feed: "Depth With Door Open 90 Degree 61.88". Medium confidence: retailer copy of Whirlpool's spec feed; Whirlpool publishes no dimension guide for this model (owner decision 2026-10-22). Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | 34 in | ? Verified — finalized database measurement · Calculated/inferred | Whirlpool measurement source — 59e282c5843651d3dd81dd91b3942ea2f27253c71fbef605160e7673819f2a47.pdf Publisher not recorded | Page 5 | |
Value used by ExactFit34 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * side_ventilation_clearance_in Confidence label: medium. Calculation inputs: Overall width; Left-side ventilation clearance; Primary evidenceWhirlpool measurement source — 59e282c5843651d3dd81dd91b3942ea2f27253c71fbef605160e7673819f2a47.pdf Overall width 33 in (Whirlpool learnwhirlpool.com infosheet WRTX5421T (brand partner sheet)) + 2 x 1/2 in side space (Whirlpool top-mount refrigerator owner's manual W11775862B (linked by Lowe's for WRTX5421), p.5) = 34 in. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedOverall width 33 in (Whirlpool learnwhirlpool.com infosheet WRTX5421T (brand partner sheet)) + 2 x 1/2 in side space (Whirlpool top-mount refrigerator owner's manual W11775862B (linked by Lowe's for WRTX5421), p.5) = 34 in. Calculation or inference: width_doors_closed_in + 2 * side_ventilation_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | 67.5625 in | ? Verified — finalized database measurement · Calculated/inferred | Whirlpool measurement source — 59e282c5843651d3dd81dd91b3942ea2f27253c71fbef605160e7673819f2a47.pdf Publisher not recorded | Page 5 | |
Value used by ExactFit67.5625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: height_hinge_in + top_clearance_in Confidence label: medium. Calculation inputs: Height with hinge / controlling height; Top clearance; Primary evidenceWhirlpool measurement source — 59e282c5843651d3dd81dd91b3942ea2f27253c71fbef605160e7673819f2a47.pdf Overall height 66.0625 in (Whirlpool learnwhirlpool.com infosheet WRTX5421T (brand partner sheet)) + 1 1/2 in top space (Whirlpool top-mount refrigerator owner's manual W11775862B (linked by Lowe's for WRTX5421), p.5) = 67.5625 in. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedOverall height 66.0625 in (Whirlpool learnwhirlpool.com infosheet WRTX5421T (brand partner sheet)) + 1 1/2 in top space (Whirlpool top-mount refrigerator owner's manual W11775862B (linked by Lowe's for WRTX5421), p.5) = 67.5625 in. Calculation or inference: height_hinge_in + top_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | 28.81 in | ? Verified — finalized database measurement · Calculated/inferred | Whirlpool measurement source — 85b9c65f588e4b9e5f6c494e91418fb38795402bc86b979b5abf09159f081e0e.html Publisher not recorded | Page 1 | |
Value used by ExactFit28.81 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidenceWhirlpool measurement source — 85b9c65f588e4b9e5f6c494e91418fb38795402bc86b979b5abf09159f081e0e.html Depth excluding doors 27.81 in (Town Appliance product page for Whirlpool WRTX5421TZ (saved 2026-10-22), Specifications > Dimensions, Whirlpool spec feed) + 1 in rear space (owner's manual W11775862B p.5) = 28.81 in. Medium confidence: retailer copy of Whirlpool's spec feed; Whirlpool publishes no dimension guide for this model (owner decision 2026-10-22). The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedDepth excluding doors 27.81 in (Town Appliance product page for Whirlpool WRTX5421TZ (saved 2026-10-22), Specifications > Dimensions, Whirlpool spec feed) + 1 in rear space (owner's manual W11775862B p.5) = 28.81 in. Medium confidence: retailer copy of Whirlpool's spec feed; Whirlpool publishes no dimension guide for this model (owner decision 2026-10-22). Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | 0.5 in | ? Verified — finalized database measurement | Whirlpool measurement source — 59e282c5843651d3dd81dd91b3942ea2f27253c71fbef605160e7673819f2a47.pdf Publisher not recorded | Page 5 | |
Value used by ExactFit0.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool measurement source — 59e282c5843651d3dd81dd91b3942ea2f27253c71fbef605160e7673819f2a47.pdf Whirlpool top-mount refrigerator owner's manual W11775862B (linked by Lowe's for WRTX5421), p.5 Location Requirements: "allow 1/2" (1.25 cm) of space on each side". The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedWhirlpool top-mount refrigerator owner's manual W11775862B (linked by Lowe's for WRTX5421), p.5 Location Requirements: "allow 1/2" (1.25 cm) of space on each side". Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | 0.5 in | ? Verified — finalized database measurement | Whirlpool measurement source — 59e282c5843651d3dd81dd91b3942ea2f27253c71fbef605160e7673819f2a47.pdf Publisher not recorded | Page 5 | |
Value used by ExactFit0.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool measurement source — 59e282c5843651d3dd81dd91b3942ea2f27253c71fbef605160e7673819f2a47.pdf Whirlpool top-mount refrigerator owner's manual W11775862B (linked by Lowe's for WRTX5421), p.5 Location Requirements: "allow 1/2" (1.25 cm) of space on each side". The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedWhirlpool top-mount refrigerator owner's manual W11775862B (linked by Lowe's for WRTX5421), p.5 Location Requirements: "allow 1/2" (1.25 cm) of space on each side". Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | 1.5 in | ? Verified — finalized database measurement | Whirlpool measurement source — 59e282c5843651d3dd81dd91b3942ea2f27253c71fbef605160e7673819f2a47.pdf Publisher not recorded | Page 5 | |
Value used by ExactFit1.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool measurement source — 59e282c5843651d3dd81dd91b3942ea2f27253c71fbef605160e7673819f2a47.pdf Whirlpool top-mount refrigerator owner's manual W11775862B (linked by Lowe's for WRTX5421), p.5: "Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top". The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedWhirlpool top-mount refrigerator owner's manual W11775862B (linked by Lowe's for WRTX5421), p.5: "Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top". Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | 1 in | ? Verified — finalized database measurement | Whirlpool measurement source — 59e282c5843651d3dd81dd91b3942ea2f27253c71fbef605160e7673819f2a47.pdf Publisher not recorded | Page 5 | |
Value used by ExactFit1 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool measurement source — 59e282c5843651d3dd81dd91b3942ea2f27253c71fbef605160e7673819f2a47.pdf Whirlpool top-mount refrigerator owner's manual W11775862B (linked by Lowe's for WRTX5421), p.5: "Allow at least 1" (2.54 cm) between back of cabinet and the wall". The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedWhirlpool top-mount refrigerator owner's manual W11775862B (linked by Lowe's for WRTX5421), p.5: "Allow at least 1" (2.54 cm) between back of cabinet and the wall". Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Wall clearance for door open to 90° | Unknown | ? Not found | Source not recorded Publisher not recorded | Exact location not retained | |
Value used by ExactFitUnknown · Fit role: Operating clearance. Primary evidenceSource not recorded No retained excerpt is available. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedNo evidence decision recorded. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Wall clearance for fully open door | Unknown | ? Not found | Source not recorded Publisher not recorded | Exact location not retained | |
Value used by ExactFitUnknown · Fit role: Operating clearance. Primary evidenceSource not recorded No retained excerpt is available. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedNo evidence decision recorded. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | 32.5 in | ? Verified — finalized database measurement | Whirlpool measurement source — 85b9c65f588e4b9e5f6c494e91418fb38795402bc86b979b5abf09159f081e0e.html Publisher not recorded | Page 1 | |
Value used by ExactFit32.5 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceWhirlpool measurement source — 85b9c65f588e4b9e5f6c494e91418fb38795402bc86b979b5abf09159f081e0e.html Town Appliance product page for Whirlpool WRTX5421TZ (saved 2026-10-22), Specifications > Dimensions, Whirlpool spec feed: "Cabinet Width 32.5". Medium confidence: retailer copy of Whirlpool's spec feed; Whirlpool publishes no dimension guide for this model (owner decision 2026-10-22). The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedTown Appliance product page for Whirlpool WRTX5421TZ (saved 2026-10-22), Specifications > Dimensions, Whirlpool spec feed: "Cabinet Width 32.5". Medium confidence: retailer copy of Whirlpool's spec feed; Whirlpool publishes no dimension guide for this model (owner decision 2026-10-22). Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Not found for safe fit use. Sources retained: None. No rejected related-model candidate is identified in the retained record.
No evidence decision recorded.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: None. No rejected related-model candidate is identified in the retained record.
No evidence decision recorded.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
Publisher not recorded · Retained document · Scope not established
Model numbers covered: Not explicitly retained. Publication/revision date: Not recorded. Reviewed: 2026-10-22.
3 displayed measurements supported: Overall width; Height with hinge / controlling height; Depth with handle.
Availability: retained review record; original URL unavailable in the record.
Publisher not recorded · Retained document · Scope not established
Model numbers covered: Not explicitly retained. Publication/revision date: Not recorded. Reviewed: 2026-10-22.
6 displayed measurements supported: Cabinet height; Depth without door; Depth with door, without handles; Depth with doors open at 90°; Minimum cutout depth; Cabinet case width.
Availability: retained review record; original URL unavailable in the record.
Publisher not recorded · Retained document · Scope not established
Model numbers covered: Not explicitly retained. Publication/revision date: Not recorded. Reviewed: 2026-10-22.
6 displayed measurements supported: Minimum cutout width; Minimum cutout height; Left-side ventilation clearance; Right-side ventilation clearance; Top clearance; Rear clearance.
Availability: retained review record; original URL unavailable in the record.
Evidence reflects the sources reviewed on 2026-10-22. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.