Measurement evidence for Whirlpool WRTX5118TZ

Value used by ExactFit

28 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 10ae28a67d675393b8a1098db08feb8104e69dc6bae92bab4c5484a26a9bc078.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Printed F, width of cabinet: 28 in (71 cm); the doors sit within it. Owner decision 2026-10-21: the model's own sheet wins over the product page's 27.938 in.

Why this value was used

Printed F, width of cabinet: 28 in (71 cm); the doors sit within it. Owner decision 2026-10-21: the model's own sheet wins over the product page's 27.938 in.

Other evidence found

• 27.94 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: net Width: 27.94 in | Refrigerator Refrigerator Type Top Freezer Wheels 4-Natural ### Dimensions Cabinet Width 27.938 in Capacity 17.6 cu. ft. Common Size 28 in Depth 29.4375 in Depth Closed Excluding. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

67.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 10ae28a67d675393b8a1098db08feb8104e69dc6bae92bab4c5484a26a9bc078.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Printed B, height to top of cabinet: 67 3/8 in (171.1 cm). Replaces the rounded web value.

Why this value was used

Printed B, height to top of cabinet: 67 3/8 in (171.1 cm). Replaces the rounded web value.

Other evidence found

• 67.38 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Cabinet: 67.38 in | 4.5 in Freezer Capacity Volume 3.95 cu. ft. Gross Weight 163 lbs Height 68.5 in Height To Top Of Cabinet 67.375 in Height To Top Of Door Hinge 68 in Height To Top Of Door Trim 68.5 in Maximum He. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 10ae28a67d675393b8a1098db08feb8104e69dc6bae92bab4c5484a26a9bc078.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-24

Printed overall height, doors closed: 68 3/8 in; the sheet names WRTX5118TZ.

Why this value was used

Printed overall height, doors closed: 68 3/8 in; the sheet names WRTX5118TZ.

Other evidence found

• 68 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Door Hinge: 68.0 in | cu. ft. Gross Weight 163 lbs Height 68.5 in Height To Top Of Cabinet 67.375 in Height To Top Of Door Hinge 68 in Height To Top Of Door Trim 68.5 in Maximum Height 68.5 in Minimum Height 67.375. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25.1875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 10ae28a67d675393b8a1098db08feb8104e69dc6bae92bab4c5484a26a9bc078.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Printed E, depth of cabinet only: 25 3/16 in (64 cm). Replaces the rounded web value.

Why this value was used

Printed E, depth of cabinet only: 25 3/16 in (64 cm). Replaces the rounded web value.

Other evidence found

• 25.19 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Depth Excluding Doors: 25.19 in | pth Closed Excluding Handles 29.438 in Depth Closed Including Handles 29.438 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.5 in Freezer Capacity Volume 3.95 cu. ft. Gro. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.4375 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 10ae28a67d675393b8a1098db08feb8104e69dc6bae92bab4c5484a26a9bc078.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Printed D, overall depth: 29 7/16 in (74.8 cm); the handles do not project past it. Replaces the rounded web value.

Why this value was used

Printed D, overall depth: 29 7/16 in (74.8 cm); the handles do not project past it. Replaces the rounded web value.

Other evidence found

• 29.44 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Depth Closed Excluding Handles: 29.44 in | abinet Width 27.938 in Capacity 17.6 cu. ft. Common Size 28 in Depth 29.4375 in Depth Closed Excluding Handles 29.438 in Depth Closed Including Handles 29.438 in Depth Excluding Doors 25.188 in Depth . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29.4375 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 10ae28a67d675393b8a1098db08feb8104e69dc6bae92bab4c5484a26a9bc078.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Printed D, overall depth: 29 7/16 in (74.8 cm). Replaces the rounded web value.

Why this value was used

Printed D, overall depth: 29 7/16 in (74.8 cm). Replaces the rounded web value.

Other evidence found

• 90 in — superseded

  www.pioneerappliance.net; location not retained. Model scope: not separately recorded. Raw value: **product depth** : **Depth With Door Open 90 Degree** . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗
• 90 in — superseded

  www.pioneerappliance.net; location not retained. Model scope: not separately recorded. Raw value: **product depth** : **Depth With Door Open 90 Degree** . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗
• 29.44 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Depth Closed Including Handles: 29.44 in | ft. Common Size 28 in Depth 29.4375 in Depth Closed Excluding Handles 29.438 in Depth Closed Including Handles 29.438 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.5 in Freezer . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

54.625 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 10ae28a67d675393b8a1098db08feb8104e69dc6bae92bab4c5484a26a9bc078.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-24

Printed depth with the door open 90 degrees: 54 5/8 in.

Why this value was used

Printed depth with the door open 90 degrees: 54 5/8 in.

Other evidence found

• 54.5 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Handles 29.438 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.5 in Freezer Capacity Volume 3.95 cu. ft. Gross Weight. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 28 + 2 * 0.5

Confidence label: high.

Primary evidence

Whirlpool measurement source — 10ae28a67d675393b8a1098db08feb8104e69dc6bae92bab4c5484a26a9bc078.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-21

Recalculated 2026-10-21: max(case width, width doors closed) + 2 * side clearance = 28 + 2 * 0.5 = 29 in (previously 28.94 in). Side clearance 1/2 in each side from the sheet's Location Requirements (p.2).

Why this value was used

Recalculated 2026-10-21: max(case width, width doors closed) + 2 * side clearance = 28 + 2 * 0.5 = 29 in (previously 28.94 in). Side clearance 1/2 in each side from the sheet's Location Requirements (p.2). Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 28 + 2 * 0.5.

Other evidence found

• 28.94 in — superseded

  An earlier brand-wide assumption (no document for this model); location not retained. Model scope: not separately recorded. Raw value: Derived minimum opening width 28.94 in from product width 27.94 in and explicit 0.5 in clearance on each side.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

71.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: high.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Whirlpool measurement source — dimension-guide-w11821754-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-24

Recalculated 2026-09-24 with the stored formula from current inputs: max(height_case_in,height_hinge_in) + top_clearance_in with height_case_in = 67.38, height_hinge_in = 68.375, top_clearance_in = 3 = 71.375 in (previously 71 in).

Why this value was used

Recalculated 2026-09-24 with the stored formula from current inputs: max(height_case_in,height_hinge_in) + top_clearance_in with height_case_in = 67.38, height_hinge_in = 68.375, top_clearance_in = 3 = 71.375 in (previously 71 in). Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

• 71 in — superseded

  The same document as the value used above; page 2. Model scope: not separately recorded. Raw value: Whirlpool opening envelope: max(67.38, 68.0) + 3.0 = 71.0 in.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26.1875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — 105606035.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-10-21

Recalculated 2026-10-21 with the stored formula from current inputs: depth_case_only_in + rear_clearance_in with depth_case_only_in = 25.1875, rear_clearance_in = 1 = 26.1875 in (previously 26.19 in).

Why this value was used

Recalculated 2026-10-21 with the stored formula from current inputs: depth_case_only_in + rear_clearance_in with depth_case_only_in = 25.1875, rear_clearance_in = 1 = 26.1875 in (previously 26.19 in). Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

• 26.19 in — superseded

  The same document as the value used above; page 5. Model scope: not separately recorded. Raw value: Whirlpool opening envelope: 25.19 + 1.0 = 26.19 in.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRTX5118***

Confidence label: high.

Primary evidence

Whirlpool measurement source — dimension-guide-w11821754-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern WRTX5118***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRTX5118***

Confidence label: high.

Primary evidence

Whirlpool measurement source — dimension-guide-w11821754-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern WRTX5118***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool measurement source — dimension-guide-w11821754-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Conflict adjudication: model-specific dimension guide requires 3 in between overhead cabinets and refrigerator top. Older owner-manual copy stated 1.5 in; the newer/model-specific requirement controls and is more conservative. Evidence: To ensure proper ventilation for your refrigerator, allow for a | 1/2" (1.25 cm) space on each side. Allow 3" (7.5 cm) of space | between overhead cabinets and refrigerator top. Allow at least

Why this value was used

Conflict adjudication: model-specific dimension guide requires 3 in between overhead cabinets and refrigerator top. Older owner-manual copy stated 1.5 in; the newer/model-specific requirement controls and is more conservative. Evidence: To ensure proper ventilation for your refrigerator, allow for a | 1/2" (1.25 cm) space on each side. Allow 3" (7.5 cm) of space | between overhead cabinets and refrigerator top. Allow at least

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105606035.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator

Why this value was used

Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.0625 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 10ae28a67d675393b8a1098db08feb8104e69dc6bae92bab4c5484a26a9bc078.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Printed G, width with door open (top view, door at 90 degrees): 2 1/16 in (5.2 cm) past the side of the cabinet on the hinge side. Page 2 says only to leave enough space on the hinge side next to a fixed wall. Owner decision 2026-10-21: use G as the wall clearance at 90 degrees.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

Printed G, width with door open (top view, door at 90 degrees): 2 1/16 in (5.2 cm) past the side of the cabinet on the hinge side. Page 2 says only to leave enough space on the hinge side next to a fixed wall. Owner decision 2026-10-21: use G as the wall clearance at 90 degrees.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 10ae28a67d675393b8a1098db08feb8104e69dc6bae92bab4c5484a26a9bc078.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Printed F, width of cabinet: 28 in (71 cm). Owner decision 2026-10-21: the model's own sheet wins over the product page's 27.938 in.

Why this value was used

Printed F, width of cabinet: 28 in (71 cm). Owner decision 2026-10-21: the model's own sheet wins over the product page's 27.938 in.

Other evidence found

• 27.938 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: _WRTX5118TZ_Dimension_sRGB.tif?$$) ### Dimensions Cabinet Width 27.938 in Capacity 17.6 cu. ft. Common Size 28 in Depth 29.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.