Measurement evidence for Whirlpool WRTX3316TZ

Value used by ExactFit

28 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool measurement source — whirlpool-33-1635-cu-ft-fingerprint-resistant-stainless-steel-top-freezer-refrigerator-with-total-coverage-cooling-wrtx3316tz-1894558
www.johnsonappliancekewanee.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: net Width = 28.0 in | irlpool® 33" 16.35 Cu. Ft. Fingerprint Resis
Reviewed: 2026-09-04

Exact-model cached specification: net Width = 28.0 in | irlpool® 33" 16.35 Cu. Ft. Fingerprint Resistant Stainless ... Dimensions ; Cabinet Width, 28 in ; Height To Top Of Door Hinge, 66.63 in ; Height To Top Of Door Trim, 66.63 in

Why this value was used

Exact-model cached specification: net Width = 28.0 in | irlpool® 33" 16.35 Cu. Ft. Fingerprint Resistant Stainless ... Dimensions ; Cabinet Width, 28 in ; Height To Top Of Door Hinge, 66.63 in ; Height To Top Of Door Trim, 66.63 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — wrtx3316tz.html
www.brownwoodsouthwestappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached table: Height To Top Of Cabinet = 66.625 in.
Reviewed: 2026-09-04

Exact-model cached table: Height To Top Of Cabinet = 66.625 in.

Why this value was used

Exact-model cached table: Height To Top Of Cabinet = 66.625 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — wrtx3316tz.html
www.brownwoodsouthwestappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached table: Height To Top Of Door Hinge = 66.625 in; normalized from rounded 66.63 in.
Reviewed: 2026-09-04

Exact-model cached table: Height To Top Of Door Hinge = 66.625 in; normalized from rounded 66.63 in.

Why this value was used

Exact-model cached table: Height To Top Of Door Hinge = 66.625 in; normalized from rounded 66.63 in.

Other evidence found

• 66.63 in — superseded

  www.johnsonappliancekewanee.com; location not retained. Model scope: not separately recorded. Raw value: Exact-model cached specification: Height To Top Of Door Hinge = 66.63 in | Cu. Ft. Fingerprint Resistant Stainless ... Dimensions ; Cabinet Width, 28 in ; Height To Top Of Door Hinge, 66.63 in ; Height To Top Of Door Trim, 66.63 in ; Maximum Height, 66.63 in. . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

27.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — wrtx3316tz.html
www.brownwoodsouthwestappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached table: Depth Excluding Doors = 27.625 in.
Reviewed: 2026-09-04

Exact-model cached table: Depth Excluding Doors = 27.625 in.

Why this value was used

Exact-model cached table: Depth Excluding Doors = 27.625 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.875 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — wrtx3316tz.html
www.brownwoodsouthwestappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached table: Depth Closed Excluding Handles = 31.875 in.
Reviewed: 2026-09-04

Exact-model cached table: Depth Closed Excluding Handles = 31.875 in.

Why this value was used

Exact-model cached table: Depth Closed Excluding Handles = 31.875 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

31.875 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — wrtx3316tz.html
www.brownwoodsouthwestappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached table: Depth Closed Including Handles = 31.875 in.
Reviewed: 2026-09-04

Exact-model cached table: Depth Closed Including Handles = 31.875 in.

Why this value was used

Exact-model cached table: Depth Closed Including Handles = 31.875 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

56.875 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — wrtx3316tz.html
www.brownwoodsouthwestappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached table: Depth With Door Open 90 Degree = 56.875 in.
Reviewed: 2026-09-04

Exact-model cached table: Depth With Door Open 90 Degree = 56.875 in.

Why this value was used

Exact-model cached table: Depth With Door Open 90 Degree = 56.875 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 28.0 + 2 * 0.5

Confidence label: medium.

Primary evidence

Whirlpool measurement source — whirlpool-33-1635-cu-ft-fingerprint-resistant-stainless-steel-top-freezer-refrigerator-with-total-coverage-cooling-wrtx3316tz-1894558 + side gap from the maker's document
www.johnsonappliancekewanee.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 29.0 in from product width 28.0 in and explicit 0.5 in clearance on ea
Reviewed: 2026-09-04

Derived minimum opening width 29.0 in from product width 28.0 in and explicit 0.5 in clearance on each side.

Why this value was used

Derived minimum opening width 29.0 in from product width 28.0 in and explicit 0.5 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 28.0 + 2 * 0.5.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Whirlpool measurement source — 105617607.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

Whirlpool opening envelope: max(66.625, 66.625) + 1.5 = 68.125 in.

Why this value was used

Whirlpool opening envelope: max(66.625, 66.625) + 1.5 = 68.125 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — 105617607.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

Whirlpool opening envelope: 27.625 + 1.0 = 28.625 in.

Why this value was used

Whirlpool opening envelope: 27.625 + 1.0 = 28.625 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105617607.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-10-29

The document this model's measurements come from states: "To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side."

Why this value was used

The document this model's measurements come from states: "To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105617607.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-10-29

The document this model's measurements come from states: "To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side."

Why this value was used

The document this model's measurements come from states: "To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105617607.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1"

Why this value was used

Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105617607.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator

Why this value was used

Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool measurement source — whirlpool-33-1635-cu-ft-fingerprint-resistant-stainless-steel-top-freezer-refrigerator-with-total-coverage-cooling-wrtx3316tz-1894558
www.johnsonappliancekewanee.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: Cabinet Width = 28.0 in | Whirlpool® 33" 16.35 Cu. Ft. Fingerprint
Reviewed: 2026-09-04

Exact-model cached specification: Cabinet Width = 28.0 in | Whirlpool® 33" 16.35 Cu. Ft. Fingerprint Resistant Stainless ... Dimensions ; Cabinet Width, 28 in ; Height To Top Of Door Hinge, 66.63 in ; Height To Top Of Door Trim, 66.63 in

Why this value was used

Exact-model cached specification: Cabinet Width = 28.0 in | Whirlpool® 33" 16.35 Cu. Ft. Fingerprint Resistant Stainless ... Dimensions ; Cabinet Width, 28 in ; Height To Top Of Door Hinge, 66.63 in ; Height To Top Of Door Trim, 66.63 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.