Measurement evidence for Whirlpool WRTX3014TB

Value used by ExactFit

28 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 3c124ebbb1aedf6cdd9a4a3495da288b65acdd7440c353bd748380ccb4d428c6.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): B, width of cabinet = 28 in; the doors sit within it (owner decision 2026-10-21, as for WRTX5118).

Why this value was used

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): B, width of cabinet = 28 in; the doors sit within it (owner decision 2026-10-21, as for WRTX5118).

Other evidence found

• 27.94 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: net Width: 27.94 in | on of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Cabinet Width 27.938 in Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

62.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 3c124ebbb1aedf6cdd9a4a3495da288b65acdd7440c353bd748380ccb4d428c6.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): D, height of cabinet = 62 3/8 in. Replaces the rounded web value.

Why this value was used

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): D, height of cabinet = 62 3/8 in. Replaces the rounded web value.

Other evidence found

• 62.38 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Cabinet: 62.38 in | n Freezer Capacity Volume 3.84 cu. ft. Gross Weight 159.84 lbs Height 63.125 in Height To Top Of Cabinet 62.375 in Height To Top Of Door Hinge 62.875 in Height To Top Of Door Trim 63.125 in Maxi. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

62.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 3c124ebbb1aedf6cdd9a4a3495da288b65acdd7440c353bd748380ccb4d428c6.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): E, overall height = 62 7/8 in. Replaces the rounded web value.

Why this value was used

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): E, overall height = 62 7/8 in. Replaces the rounded web value.

Other evidence found

• 62.88 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Door Hinge: 62.88 in | ft. Gross Weight 159.84 lbs Height 63.125 in Height To Top Of Cabinet 62.375 in Height To Top Of Door Hinge 62.875 in Height To Top Of Door Trim 63.125 in Maximum Height 63.125 in Minimum Height 62. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 3c124ebbb1aedf6cdd9a4a3495da288b65acdd7440c353bd748380ccb4d428c6.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): C, depth of cabinet only = 25 1/4 in. Replaces the web value 25.19 in.

Why this value was used

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): C, depth of cabinet only = 25 1/4 in. Replaces the web value 25.19 in.

Other evidence found

• 25.19 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Depth Excluding Doors: 25.19 in | pth Closed Excluding Handles 28.625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.688 in Depth-Drawer Open 54.688 in Freezer Ca. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 3c124ebbb1aedf6cdd9a4a3495da288b65acdd7440c353bd748380ccb4d428c6.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): A, depth with door = 28 5/8 in (recessed handles). Replaces the rounded web value.

Why this value was used

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): A, depth with door = 28 5/8 in (recessed handles). Replaces the rounded web value.

Other evidence found

• 28.62 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Depth Closed Excluding Handles: 28.62 in | ds ### Dimensions Cabinet Width 27.938 in Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 3c124ebbb1aedf6cdd9a4a3495da288b65acdd7440c353bd748380ccb4d428c6.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): A, depth with door = 28 5/8 in. Replaces the rounded web value.

Why this value was used

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): A, depth with door = 28 5/8 in. Replaces the rounded web value.

Other evidence found

• 28.62 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Depth Closed Including Handles: 28.62 in | Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.688 in Depth-. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

54.6875 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 3c124ebbb1aedf6cdd9a4a3495da288b65acdd7440c353bd748380ccb4d428c6.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): F, depth with doors open 90 degrees = 54 11/16 in. Replaces the rounded web value.

Why this value was used

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): F, depth with doors open 90 degrees = 54 11/16 in. Replaces the rounded web value.

Other evidence found

• 54.688 in — superseded

  www.ajmadison.com; location not retained. Model scope: not separately recorded. Raw value: ndles: 28.625 in Depth Excluding Doors: 25.188 in Depth With Door Open 90 Degree: 54.688 in Freezer Capacity Volume: 3.84 cu. ft. Gross Weigh. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 28 + 2 * 0.5

Confidence label: high.

Primary evidence

Whirlpool measurement source — documents for other models on the same chassis
www.ramagefurnitureandappliance.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-21

Recalculated 2026-10-21 with the stored formula from current inputs: max(case width, width doors closed) + 2 * explicit side clearance = 28 + 2 * 0.5 = 29.0 in (previously 28.9375 in).

Why this value was used

Recalculated 2026-10-21 with the stored formula from current inputs: max(case width, width doors closed) + 2 * explicit side clearance = 28 + 2 * 0.5 = 29.0 in (previously 28.9375 in). Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 28 + 2 * 0.5.

Other evidence found

• 28.9375 in — superseded

  An earlier brand-wide assumption (no document for this model); location not retained. Model scope: not separately recorded. Raw value: Whirlpool WRTX3014TW cached finish-variant chassis match. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: high.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Whirlpool measurement source — dimension-guide-w11821758-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-21

Recalculated 2026-10-21: max(height_case_in,height_hinge_in) + top_clearance_in = 62.875 + 3 = 65.875 in, per the guide's 3 in between overhead cabinets and refrigerator top (p.2). Replaces 65.88 in.

Why this value was used

Recalculated 2026-10-21: max(height_case_in,height_hinge_in) + top_clearance_in = 62.875 + 3 = 65.875 in, per the guide's 3 in between overhead cabinets and refrigerator top (p.2). Replaces 65.88 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

• 65.88 in — superseded

  The same document as the value used above; page 2. Model scope: not separately recorded. Raw value: Whirlpool opening envelope: max(62.38, 62.88) + 3.0 = 65.88 in.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26.25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — 105605909.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-21

Recalculated 2026-10-21 with the stored formula from current inputs: depth_case_only_in + rear_clearance_in with depth_case_only_in = 25.25, rear_clearance_in = 1 = 26.25 in (previously 26.19 in).

Why this value was used

Recalculated 2026-10-21 with the stored formula from current inputs: depth_case_only_in + rear_clearance_in with depth_case_only_in = 25.25, rear_clearance_in = 1 = 26.25 in (previously 26.19 in). Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

• 26.19 in — superseded

  The same document as the value used above; page 5. Model scope: not separately recorded. Raw value: Whirlpool opening envelope: 25.19 + 1.0 = 26.19 in.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRTX3014T***

Confidence label: high.

Primary evidence

Whirlpool measurement source — dimension-guide-w11821758-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern WRTX3014T***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRTX3014T***

Confidence label: high.

Primary evidence

Whirlpool measurement source — dimension-guide-w11821758-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern WRTX3014T***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool measurement source — dimension-guide-w11821758-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Conflict adjudication: model-specific dimension guide requires 3 in between overhead cabinets and refrigerator top. Older owner-manual copy stated 1.5 in; the newer/model-specific requirement controls and is more conservative. Evidence: To ensure proper ventilation for your refrigerator, allow for a | 1/2" (1.25 cm) space on each side. Allow 3" (7.5 cm) of space | between overhead cabinets and refrigerator top. Allow at least

Why this value was used

Conflict adjudication: model-specific dimension guide requires 3 in between overhead cabinets and refrigerator top. Older owner-manual copy stated 1.5 in; the newer/model-specific requirement controls and is more conservative. Evidence: To ensure proper ventilation for your refrigerator, allow for a | 1/2" (1.25 cm) space on each side. Allow 3" (7.5 cm) of space | between overhead cabinets and refrigerator top. Allow at least

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105605909.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator

Why this value was used

Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: (29.688 - 27.938)

Confidence label: high.

Primary evidence

Whirlpool measurement source — WRTX3014TB?fields=FULL&lang=en_US
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-25

Manufacturer page/document for Exact manufacturer product API record for WRTX3014TB.: "Cabinet Width" = 27.938 in; "Width Doors Open 90 Degrees" = 29.688 in.. Found 2026-10-25.

Why this value was used

Manufacturer page/document for Exact manufacturer product API record for WRTX3014TB.: "Cabinet Width" = 27.938 in; "Width Doors Open 90 Degrees" = 29.688 in.. Found 2026-10-25.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 3c124ebbb1aedf6cdd9a4a3495da288b65acdd7440c353bd748380ccb4d428c6.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): B, width of cabinet = 28 in. The model's own sheet wins over the product page's 27.938 in (owner decision 2026-10-21, as for WRTX5118).

Why this value was used

Dimension guide W11821758A (WRTX3014T***, WRTX3314T***): B, width of cabinet = 28 in. The model's own sheet wins over the product page's 27.938 in (owner decision 2026-10-21, as for WRTX5118).

Other evidence found

• 27.938 in — superseded

  www.ajmadison.com; location not retained. Model scope: not separately recorded. Raw value: - Features - Reviews ## Specifications Dimensions Cabinet Width: 27.938 in Depth: 28.625 in Depth Closed Excluding Handles: . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.