Measurement evidence for Whirlpool WRT519SZDT

Value used by ExactFit

29.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.WRT519SZDT.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: net Width = 29.5 in. Context: Refrigerator Refriger
Reviewed: 2026-09-04

Reviewed cached exact-model manufacturer label: net Width = 29.5 in. Context: Refrigerator Refrigerator Type Top Freezer Wheels 4-Natural ### Dimensions Cabinet Width 29.5 in Capacity 19.14 cu. ft. Depth 34.5 in Depth Closed Excluding Handles 32.875 in D

Why this value was used

Reviewed cached exact-model manufacturer label: net Width = 29.5 in. Context: Refrigerator Refrigerator Type Top Freezer Wheels 4-Natural ### Dimensions Cabinet Width 29.5 in Capacity 19.14 cu. ft. Depth 34.5 in Depth Closed Excluding Handles 32.875 in D

Other evidence found

• 29.75 in — superseded

  Document 105518637.pdf; page 1. Model scope: not separately recorded. Raw value: H x W x D) 65-7/8" x 29-3/4" x 34-1/2". The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105518640.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Dimension guide W11558135A (WRT519SZD row): Height - Top of Cabinet "B" = 65 3/8 in. Replaces the rounded web value.

Why this value was used

Dimension guide W11558135A (WRT519SZD row): Height - Top of Cabinet "B" = 65 3/8 in. Replaces the rounded web value.

Other evidence found

• 65.875 in — superseded

  Document 105518637.pdf; page 1. Model scope: not separately recorded. Raw value: H x W x D) 65-7/8" x 29-3/4" x 34-1/2". The final reviewed registry supersedes this earlier audit value.

• 65.38 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 65.38 in. Context: 5 in Freezer Capacity Volume 5.14 cu. ft. Gross Weight 198 lbs Height 65.875 in Height To Top Of Cabinet 65.375 in Height To Top Of Door Hinge 65.875 in Net Weight 0 lbs Refrigerator Capacity Vo. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105518637.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

H x W x D) 65-7/8" x 29-3/4" x 34-1/2"

Why this value was used

H x W x D) 65-7/8" x 29-3/4" x 34-1/2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.WRT519SZDT.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors 28.875 in
Reviewed: 2026-09-04

Depth Excluding Doors 28.875 in

Why this value was used

Depth Excluding Doors 28.875 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

32.875 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105518640.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-21

Dimension guide W11558135A (WRT519SZD row): Depth - Without Handles "E" = 32 7/8 in. Replaces the rounded web value.

Why this value was used

Dimension guide W11558135A (WRT519SZD row): Depth - Without Handles "E" = 32 7/8 in. Replaces the rounded web value.

Other evidence found

• 34.5 in — superseded

  Document 105518637.pdf; page 1. Model scope: not separately recorded. Raw value: H x W x D) 65-7/8" x 29-3/4" x 34-1/2". The final reviewed registry supersedes this earlier audit value.

• 32.88 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 32.88 in. Context: tural ### Dimensions Cabinet Width 29.5 in Capacity 19.14 cu. ft. Depth 34.5 in Depth Closed Excluding Handles 32.875 in Depth Closed Including Handles 34.5 in Depth Excluding Doors 28.875 in Depth Wi. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105518637.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

H x W x D) 65-7/8" x 29-3/4" x 34-1/2"

Why this value was used

H x W x D) 65-7/8" x 29-3/4" x 34-1/2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

59.875 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105518637.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth with Door Open 90° 59-7/8"

Why this value was used

Depth with Door Open 90° 59-7/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

30.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 29.75 + 2 * 0.5 = 30.75 inches

Confidence label: medium.

Primary evidence

Whirlpool measurement source — 105518640.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

WRT519SZD cabinet width G is 29 3/4" (page 1); location requirements recommend 1/2" on each side (page 2).

Why this value was used

WRT519SZD cabinet width G is 29 3/4" (page 1); location requirements recommend 1/2" on each side (page 2). Calculation or inference: 29.75 + 2 * 0.5 = 30.75 inches.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: high.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Whirlpool measurement source — 105518644.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-21

Recalculated 2026-10-21 with the stored formula from current inputs: max(height_case_in,height_hinge_in) + top_clearance_in with height_case_in = 65.375, height_hinge_in = 65.875, top_clearance_in = 0.5 = 66.375 in (previously 67.375 in).

Why this value was used

Recalculated 2026-10-21 with the stored formula from current inputs: max(height_case_in,height_hinge_in) + top_clearance_in with height_case_in = 65.375, height_hinge_in = 65.875, top_clearance_in = 0.5 = 66.375 in (previously 67.375 in). Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

• 67.375 in — superseded

  The same document as the value used above; page 5. Model scope: not separately recorded. Raw value: Whirlpool opening envelope: max(65.38, 65.875) + 1.5 = 67.375 in.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — 105518640.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Whirlpool opening envelope: 28.875 + 1.0 = 29.875 in.

Why this value was used

Whirlpool opening envelope: 28.875 + 1.0 = 29.875 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: resolved fraction/unit/scenario semantics from cached full-page evidence

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105518640.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

full-page adjudication=0.5; parser candidates=[0.5, 0.492]; 1.27 cm) space on each side

Why this value was used

full-page adjudication=0.5; parser candidates=[0.5, 0.492]; 1.27 cm) space on each side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: resolved fraction/unit/scenario semantics from cached full-page evidence

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105518640.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

full-page adjudication=0.5; parser candidates=[0.5, 0.492]; 1.27 cm) space on each side

Why this value was used

full-page adjudication=0.5; parser candidates=[0.5, 0.492]; 1.27 cm) space on each side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105518640.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-21

Dimension guide W11558135A Location Requirements: allow a 1/2 in (1.27 cm) space on each side and between overhead cabinets and refrigerator top. The stored 1 1/2 in came from the generic top-mount owner's manual.

Why this value was used

Dimension guide W11558135A Location Requirements: allow a 1/2 in (1.27 cm) space on each side and between overhead cabinets and refrigerator top. The stored 1 1/2 in came from the generic top-mount owner's manual.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105518640.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. LOCATION REQUIREMENTS To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side and between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator has an ice maker, make sure you leave extra space at the

Why this value was used

Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. LOCATION REQUIREMENTS To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side and between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator has an ice maker, make sure you leave extra space at the

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105518640.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). (5.08 cm) minimum on the hinge side

Why this value was used

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). (5.08 cm) minimum on the hinge side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29.75 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105518637.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

H x W x D) 65-7/8" x 29-3/4" x 34-1/2"

Why this value was used

H x W x D) 65-7/8" x 29-3/4" x 34-1/2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.