Measurement evidence for Whirlpool WRT313CZLZ

Value used by ExactFit

24.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-small-space-top-freezer-refrigerator-12.9-cu.-ft.wrt313czlz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 24.38 in is the same printed dimension as 24 3/8 in (24.3
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 24.38 in is the same printed dimension as 24 3/8 in (24.375); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 24.38 in is the same printed dimension as 24 3/8 in (24.375); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 24.38 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: net Width: 24.38 in | etails Fingerprint Resistant Yes Levelers 2 Wheels 4-Natural ### Dimensions Cabinet Width 24.375 in Capacity 12.9 cu. ft. Depth 28.375 in Depth Closed Excluding Handles 28.375 in . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-small-space-top-freezer-refrigerator-12.9-cu.-ft.wrt313czlz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 65.38 in is the same printed dimension as 65 3/8 in (65.3
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 65.38 in is the same printed dimension as 65 3/8 in (65.375); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 65.38 in is the same printed dimension as 65 3/8 in (65.375); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 65.38 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Cabinet: 65.38 in | 9 in Freezer Capacity Volume 3 cu. ft. Gross Weight 143.3 lbs Height 66.1875 in Height To Top Of Cabinet 65.375 in Height To Top Of Door Hinge 66.313 in Net Weight 138.9 lbs Refrigerator Capacit. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.3125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-small-space-top-freezer-refrigerator-12.9-cu.-ft.wrt313czlz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 66.31 in is the same printed dimension as 66 5/16 in (66.
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 66.31 in is the same printed dimension as 66 5/16 in (66.3125); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 66.31 in is the same printed dimension as 66 5/16 in (66.3125); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 66.31 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Door Hinge: 66.31 in | ft. Gross Weight 143.3 lbs Height 66.1875 in Height To Top Of Cabinet 65.375 in Height To Top Of Door Hinge 66.313 in Net Weight 138.9 lbs Refrigerator Capacity Volume 9.9 Total Refrigerator Capaci. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-small-space-top-freezer-refrigerator-12.9-cu.-ft.wrt313czlz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors = 24.0 in | pth Closed Excluding Handles 28.375 in Depth Closed Including Hand
Reviewed: 2026-09-04

Depth Excluding Doors = 24.0 in | pth Closed Excluding Handles 28.375 in Depth Closed Including Handles 28.375 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 3 cu. ft. Gross We

Why this value was used

Depth Excluding Doors = 24.0 in | pth Closed Excluding Handles 28.375 in Depth Closed Including Handles 28.375 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 3 cu. ft. Gross We

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.375 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-small-space-top-freezer-refrigerator-12.9-cu.-ft.wrt313czlz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 28.38 in is the same printed dimension as 28 3/8 in (28.3
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 28.38 in is the same printed dimension as 28 3/8 in (28.375); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 28.38 in is the same printed dimension as 28 3/8 in (28.375); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 28.38 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Depth Closed Excluding Handles: 28.38 in | al ### Dimensions Cabinet Width 24.375 in Capacity 12.9 cu. ft. Depth 28.375 in Depth Closed Excluding Handles 28.375 in Depth Closed Including Handles 28.375 in Depth Excluding Doors 24 in Depth With. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28.375 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-small-space-top-freezer-refrigerator-12.9-cu.-ft.wrt313czlz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 28.38 in is the same printed dimension as 28 3/8 in (28.3
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 28.38 in is the same printed dimension as 28 3/8 in (28.375); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 28.38 in is the same printed dimension as 28 3/8 in (28.375); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 28.38 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Depth Closed Including Handles: 28.38 in | Capacity 12.9 cu. ft. Depth 28.375 in Depth Closed Excluding Handles 28.375 in Depth Closed Including Handles 28.375 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capaci. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-small-space-top-freezer-refrigerator-12.9-cu.-ft.wrt313czlz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: ing Handles 28.375 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capac
Reviewed: 2026-09-04

ing Handles 28.375 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 3 cu. ft. Gross Weight 14

Why this value was used

ing Handles 28.375 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 3 cu. ft. Gross Weight 14

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

25.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 24.38 + 2 * 0.5

Confidence label: medium.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-small-space-top-freezer-refrigerator-12.9-cu.-ft.wrt313czlz.html + 105525907.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 4
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 25.38 in is the same printed dimension as 25 3/8 in (25.375); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 25.38 in is the same printed dimension as 25 3/8 in (25.375); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored. Calculation or inference: 24.38 + 2 * 0.5.

Other evidence found

• 25.38 in — superseded

  The same document as the value used above; page 4. Model scope: not separately recorded. Raw value: Minimum opening derived from exact product width plus explicit symmetric side spacing: 24.38 + 2 * 0.5 = 25.38 in. Side evidence: To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

67.8125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Whirlpool measurement source — 105525907.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 4
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 67.81 in is the same printed dimension as 67 13/16 in (67.8125); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 67.81 in is the same printed dimension as 67 13/16 in (67.8125); every finish of the WRT313CZL family carries the same value to within 0.02 in. Source kept as stored. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

• 67.81 in — superseded

  Document 105525907.pdf; page 4. Model scope: not separately recorded. Raw value: Whirlpool opening envelope: max(65.38, 66.31) + 1.5 = 67.81 in.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — 105525907.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 4
Reviewed: 2026-09-05

Whirlpool opening envelope: 24.0 + 1.0 = 25.0 in.

Why this value was used

Whirlpool opening envelope: 24.0 + 1.0 = 25.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105525907.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 4
Reviewed: 2026-09-05

To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side

Why this value was used

To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105525907.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 4
Reviewed: 2026-09-05

To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side

Why this value was used

To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105525907.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 4
Reviewed: 2026-09-05

Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. recommended to allow a 1/2" (1.25 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of

Why this value was used

Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. recommended to allow a 1/2" (1.25 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105525907.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 4
Reviewed: 2026-09-05

Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case

Why this value was used

Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.25 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool measurement source — 105518059.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-27

Sibling-model figure, not this model's own document. Same Whirlpool 24-in top-freezer line as WRT112CZJ/WRT312CZJ, but not an identical box (WRT313CZL case 24 3/8 in wide, 66 5/16 in to the hinge; WRT112/312CZJ 24 in, 61 9/16 in). Its own instruction sheet and owner's manual (105525892/105525893 p.4) say only: "If you are installing your refrigerator next to a fixed wall, leave enough space on the hinge side to allow the door to swing open." Sibling evidence: WRT112CZJ/WRT312CZJ dimension guide (Skulytics doc 105518059, p.2): "If you are installing your refrigerator next to a fixed wall, leave 21/4" (5.7 cm) on the hinge side to allow the door to swing open." Door angle not stated; stored as the 90-degree hinge-side wall clearance. Owner-approved 2026-10-27.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

Sibling-model figure, not this model's own document. Same Whirlpool 24-in top-freezer line as WRT112CZJ/WRT312CZJ, but not an identical box (WRT313CZL case 24 3/8 in wide, 66 5/16 in to the hinge; WRT112/312CZJ 24 in, 61 9/16 in). Its own instruction sheet and owner's manual (105525892/105525893 p.4) say only: "If you are installing your refrigerator next to a fixed wall, leave enough space on the hinge side to allow the door to swing open." Sibling evidence: WRT112CZJ/WRT312CZJ dimension guide (Skulytics doc 105518059, p.2): "If you are installing your refrigerator next to a fixed wall, leave 21/4" (5.7 cm) on the hinge side to allow the door to swing open." Door angle not stated; stored as the 90-degree hinge-side wall clearance. Owner-approved 2026-10-27. Calculation or inference: agent blind extraction visually confirmed.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

24.375 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-small-space-top-freezer-refrigerator-12.9-cu.-ft.wrt313czlz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width = 24.375 in | ## Details Fingerprint Resistant Yes Levelers 2 Wheels 4-Natural ### Dim
Reviewed: 2026-09-04

Cabinet Width = 24.375 in | ## Details Fingerprint Resistant Yes Levelers 2 Wheels 4-Natural ### Dimensions Cabinet Width 24.375 in Capacity 12.9 cu. ft. Depth 28.375 in Depth Closed Excluding Handles 28.375 in

Why this value was used

Cabinet Width = 24.375 in | ## Details Fingerprint Resistant Yes Levelers 2 Wheels 4-Natural ### Dimensions Cabinet Width 24.375 in Capacity 12.9 cu. ft. Depth 28.375 in Depth Closed Excluding Handles 28.375 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.