This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-10-14. 4 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row says where its value comes from.
Retained specification excerpt: net Width: 35.5 in | Refrigerator Refrigerator Type Side-by-Side Wheels 4-Natural ### Dimensions Cab
Value used by ExactFit
35.5 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool measurement source — p.36-inch-wide-side-by-side-refrigerator-28-cu.-ft.wrsf5836rz.html Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: net Width: 35.5 in | Refrigerator Refrigerator Type Side-by-Side Wheels 4-Natural ### Dimensions Cab Reviewed: 2026-09-04
net Width: 35.5 in | Refrigerator Refrigerator Type Side-by-Side Wheels 4-Natural ### Dimensions Cabinet Width 35.5 in Capacity 28.49 cu. ft. Depth 34.875 in Depth Closed Excluding Handles 32.75 in
net Width: 35.5 in | Refrigerator Refrigerator Type Side-by-Side Wheels 4-Natural ### Dimensions Cabinet Width 35.5 in Capacity 28.49 cu. ft. Depth 34.875 in Depth Closed Excluding Handles 32.75 in
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool installation document — 105534856.pdf assets.skulytics.io · Installation manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Height To Top Of Door Hinge: 69.0 in | ft. Gross Weight 307.8 lbs Height 68.875 in Height To Top Of
Value used by ExactFit
69 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool measurement source — p.36-inch-wide-side-by-side-refrigerator-28-cu.-ft.wrsf5836rz.html Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Door Hinge: 69.0 in | ft. Gross Weight 307.8 lbs Height 68.875 in Height To Top Of Reviewed: 2026-09-04
Height To Top Of Door Hinge: 69.0 in | ft. Gross Weight 307.8 lbs Height 68.875 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 69 in Net Weight 297.8 lbs Refrigerator Capacity Volume 17.56, 17.56 Width 36 in ###
Height To Top Of Door Hinge: 69.0 in | ft. Gross Weight 307.8 lbs Height 68.875 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 69 in Net Weight 297.8 lbs Refrigerator Capacity Volume 17.56, 17.56 Width 36 in ###
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Depth Excluding Doors: 29.62 in | epth Closed Excluding Handles 32.75 in Depth Closed Including Hand
Value used by ExactFit
29.62 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool measurement source — p.36-inch-wide-side-by-side-refrigerator-28-cu.-ft.wrsf5836rz.html Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Excluding Doors: 29.62 in | epth Closed Excluding Handles 32.75 in Depth Closed Including Hand Reviewed: 2026-09-04
Depth Excluding Doors: 29.62 in | epth Closed Excluding Handles 32.75 in Depth Closed Including Handles 34.875 in Depth Excluding Doors 29.625 in Depth With Door Open 90 Degree 51.125 in Freezer Capacity Volume 10.93 cu. ft.
Depth Excluding Doors: 29.62 in | epth Closed Excluding Handles 32.75 in Depth Closed Including Handles 34.875 in Depth Excluding Doors 29.625 in Depth With Door Open 90 Degree 51.125 in Freezer Capacity Volume 10.93 cu. ft.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool installation document — 105534856.pdf assets.skulytics.io · Installation manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool installation document — 105534856.pdf assets.skulytics.io · Installation manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Retained specification excerpt: Depth With Door Open 90 = 51.125 in | .75 in Depth Closed Including Handles 34.875 in Depth Excludin
Value used by ExactFit
51.125 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool measurement source — p.36-inch-wide-side-by-side-refrigerator-28-cu.-ft.wrsf5836rz.html Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth With Door Open 90 = 51.125 in | .75 in Depth Closed Including Handles 34.875 in Depth Excludin Reviewed: 2026-09-04
Depth With Door Open 90 = 51.125 in | .75 in Depth Closed Including Handles 34.875 in Depth Excluding Doors 29.625 in Depth With Door Open 90 Degree 51.125 in Freezer Capacity Volume 10.93 cu. ft. Gross Weight 307.8 lbs Height 68.875 in H
Depth With Door Open 90 = 51.125 in | .75 in Depth Closed Including Handles 34.875 in Depth Excluding Doors 29.625 in Depth With Door Open 90 Degree 51.125 in Freezer Capacity Volume 10.93 cu. ft. Gross Weight 307.8 lbs Height 68.875 in H
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool installation document — 105534856.pdf assets.skulytics.io · Installation manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04
ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The
preferred room temperature range for optimum performance, which reduces
electricity usage and provides superior cooling, is between 60°F (15°C) and
90°F (32°C). It is recommended that you do not install the refrigerator near a
heat source, such as an oven or radiator.
■Normal minimum cabinet cut-out width required for product installation is -> 36" (91.44 cm). However, if the product is placed against an extended wall
and the ability to remove the crisper pans is desired, an additional
18" (45.72 cm) of cabinet width is required, so a total cabinet opening width
of 54" (137.16 cm) is recommended.
ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The
preferred room temperature range for optimum performance, which reduces
electricity usage and provides superior cooling, is between 60°F (15°C) and
90°F (32°C). It is recommended that you do not install the refrigerator near a
heat source, such as an oven or radiator.
■Normal minimum cabinet cut-out width required for product installation is -> 36" (91.44 cm). However, if the product is placed against an extended wall
and the ability to remove the crisper pans is desired, an additional
18" (45.72 cm) of cabinet width is required, so a total cabinet opening width
of 54" (137.16 cm) is recommended.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Minimum opening height derived from highest stored appliance endpoint 69.0 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool measurement source — dimension-guide-w11753391-revB.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
Minimum opening depth derived from case-only depth 29.62 in plus documented rear clearance 2.0 in.
Minimum opening depth derived from case-only depth 29.62 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRSF5836R***
Confidence label: medium.
Primary evidence
Whirlpool measurement source — dimension-guide-w11753391-revB.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1/2" of space on each side Calculation or inference: documented DOE model pattern WRSF5836R***.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRSF5836R***
Confidence label: medium.
Primary evidence
Whirlpool measurement source — dimension-guide-w11753391-revB.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1/2" of space on each side Calculation or inference: documented DOE model pattern WRSF5836R***.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRSF5836R***
Confidence label: medium.
Primary evidence
Whirlpool measurement source — dimension-guide-w11753391-revB.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1/2" of space on each side and at the top Calculation or inference: documented DOE model pattern WRSF5836R***.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRSF5836R***
Confidence label: medium.
Primary evidence
Whirlpool measurement source — dimension-guide-w11753391-revB.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
2" of space behind Calculation or inference: documented DOE model pattern WRSF5836R***.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document
Confidence label: medium.
Primary evidence
Whirlpool measurement source — 103455894.pdf assets.skulytics.io · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-17
Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave a 2" (5.08 cm
Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave a 2" (5.08 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Whirlpool measurement source — 105534856.pdf Publisher not recorded
Page 6
Value used by ExactFit
2 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool measurement source — 105534856.pdf Publisher not recorded · Retained document Model scope: Not established Publication/revision date: Not recorded Location: Page 6 Reviewed: 2026-10-14
2 in printed for Spanish translation says to permit the door to open fully. Read by the verification agent (run Dc71dc89221) from a document naming the model.
The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.
Why this value was used
2 in printed for Spanish translation says to permit the door to open fully. Read by the verification agent (run Dc71dc89221) from a document naming the model.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Retained specification excerpt: Cabinet Width = 35.5 in | ion Refrigerator Refrigerator Type Side-by-Side Wheels 4-Natural ### Dimen
Value used by ExactFit
35.5 in · Fit role: Informational only.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool measurement source — p.36-inch-wide-side-by-side-refrigerator-28-cu.-ft.wrsf5836rz.html Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Cabinet Width = 35.5 in | ion Refrigerator Refrigerator Type Side-by-Side Wheels 4-Natural ### Dimen Reviewed: 2026-09-04
Cabinet Width = 35.5 in | ion Refrigerator Refrigerator Type Side-by-Side Wheels 4-Natural ### Dimensions Cabinet Width 35.5 in Capacity 28.49 cu. ft. Depth 34.875 in Depth Closed Excluding Handles 32.75 in
Cabinet Width = 35.5 in | ion Refrigerator Refrigerator Type Side-by-Side Wheels 4-Natural ### Dimensions Cabinet Width 35.5 in Capacity 28.49 cu. ft. Depth 34.875 in Depth Closed Excluding Handles 32.75 in
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Model numbers covered: WRSF5836RZ. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
5 displayed measurements supported: Overall width; Height with hinge / controlling height; Depth without door; Depth with doors open at 90°; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Publisher not recorded · Retained document · Scope not established
Model numbers covered: Not explicitly retained. Publication/revision date: Not recorded. Reviewed: 2026-10-14.
5 displayed measurements supported: Cabinet height; Depth with door, without handles; Depth with handle; Minimum cutout width; Wall clearance for fully open door.
Availability: retained review record; original URL unavailable in the record.
Evidence reflects the sources reviewed on 2026-10-14. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.
