This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-09-05. 3 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSF5536RZ Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSF5536RZ Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
36-inch Standard Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSF5536RZ | Whirlpool Whirlpool
Retained specification excerpt: Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 69.0 in. Context: ft.
Value used by ExactFit
69 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
36-inch Standard Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSF5536RZ | Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 69.0 in. Context: ft. Reviewed: 2026-09-04
Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 69.0 in. Context: ft. Gross Weight 293.4 lbs Height 68.875 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 69 in Net Weight 283.4 lbs Refrigerator Capacity Volume 17.58 Width 36 in ![](https:/
Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 69.0 in. Context: ft. Gross Weight 293.4 lbs Height 68.875 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 69 in Net Weight 283.4 lbs Refrigerator Capacity Volume 17.58 Width 36 in ![](https:/
Other evidence found
69.25 in — superseded
105534014.pdf; page 1. Model scope: not separately recorded. Raw value: Overall Height
691/4" (175.9 cm). The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 69.0 in. Context: ft. Gross Weight 293.4 lbs Height 68.875 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 69 in Net Weight 283.4 lbs Refrigerator Capacity Volume 17.58 Width 36 in ![](https:/
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
36-inch Standard Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSF5536RZ | Whirlpool Whirlpool
Retained specification excerpt: Depth Excluding Doors: 29.62 in | epth Closed Excluding Handles 32.75 in Depth Closed Including Hand
Value used by ExactFit
29.62 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
36-inch Standard Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSF5536RZ | Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Excluding Doors: 29.62 in | epth Closed Excluding Handles 32.75 in Depth Closed Including Hand Reviewed: 2026-09-04
Depth Excluding Doors: 29.62 in | epth Closed Excluding Handles 32.75 in Depth Closed Including Handles 34.875 in Depth Excluding Doors 29.625 in Depth With Door Open 90 Degree 51.125 in Freezer Capacity Volume 11.12 cu. ft.
Depth Excluding Doors: 29.62 in | epth Closed Excluding Handles 32.75 in Depth Closed Including Handles 34.875 in Depth Excluding Doors 29.625 in Depth With Door Open 90 Degree 51.125 in Freezer Capacity Volume 11.12 cu. ft.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
36-inch Standard Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSF5536RZ | Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 32.75 in. Context: Reviewed: 2026-09-04
Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 32.75 in. Context: s No ### Dimensions Cabinet Width 35.5 in Capacity 28.7 cu. ft. Depth 34.875 in Depth Closed Excluding Handles 32.75 in Depth Closed Including Handles 34.875 in Depth Excluding Doors 29.625 in Depth
Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 32.75 in. Context: s No ### Dimensions Cabinet Width 35.5 in Capacity 28.7 cu. ft. Depth 34.875 in Depth Closed Excluding Handles 32.75 in Depth Closed Including Handles 34.875 in Depth Excluding Doors 29.625 in Depth
Other evidence found
33.625 in — superseded
105534014.pdf; page 1. Model scope: not separately recorded. Raw value: Depth without
handles
335/8" (85.41 cm). The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 32.75 in. Context: s No ### Dimensions Cabinet Width 35.5 in Capacity 28.7 cu. ft. Depth 34.875 in Depth Closed Excluding Handles 32.75 in Depth Closed Including Handles 34.875 in Depth Excluding Doors 29.625 in Depth
Effect on fit result
This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSF5536RZ Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSF5536RZ Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSF5536RZ Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04
temperature ranges from a minimum of 55°F (13°C) to a
maximum of 110°F (43°C). The preferred room temperature
range for optimum performance, which reduces electricity
usage and provides superior cooling, is between 60°F (15°C)
and 90°F (32°C). It is recommended that you do not install the
refrigerator near a heat source, such as an oven or radiator.
■Normal minimum cabinet cut-out width required for product -> installation is 36" (91.44 cm). However, if the product is placed
against an extended wall and the ability to remove the crisper
pans is desired, an additional 18" (45.72 cm) of cabinet width is
required, so a total cabinet opening width of 54" (137.16 cm) is
recommended.
temperature ranges from a minimum of 55°F (13°C) to a
maximum of 110°F (43°C). The preferred room temperature
range for optimum performance, which reduces electricity
usage and provides superior cooling, is between 60°F (15°C)
and 90°F (32°C). It is recommended that you do not install the
refrigerator near a heat source, such as an oven or radiator.
■Normal minimum cabinet cut-out width required for product -> installation is 36" (91.44 cm). However, if the product is placed
against an extended wall and the ability to remove the crisper
pans is desired, an additional 18" (45.72 cm) of cabinet width is
required, so a total cabinet opening width of 54" (137.16 cm) is
recommended.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Minimum opening height derived from highest appliance endpoint 69.0 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.
Why evidence from KRSC336RPS applies
Target model: WRSF5536RZ. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: max(height_case_in,height_hinge_in) + top_clearance_in.
Measurement transferred: Minimum cutout height. Relevant equivalence evidence: Minimum opening height derived from highest appliance endpoint 69.0 in plus documented top clearance 0.5 in.. Known differences: not separately recorded. Review decision: calculated formula; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Minimum opening depth derived from case-only depth 29.62 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.
Why evidence from KRSC336RPS applies
Target model: WRSF5536RZ. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: depth_case_only_in + rear_clearance_in.
Measurement transferred: Minimum cutout depth. Relevant equivalence evidence: Minimum opening depth derived from case-only depth 29.62 in plus documented rear clearance 1.0 in.. Known differences: not separately recorded. Review decision: calculated formula; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: resolved fraction/unit/scenario semantics from cached full-page evidence
Confidence label: high.
Primary evidence
KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05
full-page adjudication=0.5; parser candidates=[0.5, 2.0]; 1.27 cm) of space on each side
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: resolved fraction/unit/scenario semantics from cached full-page evidence
Confidence label: high.
Primary evidence
KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05
full-page adjudication=0.5; parser candidates=[0.5, 2.0]; 1.27 cm) of space on each side
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document
Confidence label: medium.
Primary evidence
KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05
1.27 cm) of space on each side and at the top Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.
Why evidence from KRSC336RPS applies
Target model: WRSF5536RZ. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document.
Measurement transferred: Top clearance. Relevant equivalence evidence: 1.27 cm) of space on each side and at the top. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document
Confidence label: medium.
Primary evidence
KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05
2.54 cm) of space behind Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.
Why evidence from KRSC336RPS applies
Target model: WRSF5536RZ. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document.
Measurement transferred: Rear clearance. Relevant equivalence evidence: 2.54 cm) of space behind. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document
Confidence label: medium.
Primary evidence
KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05
next to a fixed wall, leave a 2" (5.08 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.
Why evidence from KRSC336RPS applies
Target model: WRSF5536RZ. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document.
Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: next to a fixed wall, leave a 2" (5.08 cm. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSF5536RZ Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSF5536RZ Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04
Selected: 69 in. Earlier retained values: 69.25 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 69.0 in. Context: ft. Gross Weight 293.4 lbs Height 68.875 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 69 in Net Weight 283.4 lbs Refrigerator Capacity Volume 17.58 Width 36 in ![](https:/
Selected: 32.75 in. Earlier retained values: 33.625 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 32.75 in. Context: s No ### Dimensions Cabinet Width 35.5 in Capacity 28.7 cu. ft. Depth 34.875 in Depth Closed Excluding Handles 32.75 in Depth Closed Including Handles 34.875 in Depth Excluding Doors 29.625 in Depth
Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.