This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Side-by-Side · Counter-depth
Market status: Active (recorded 2026-08-17)
Last reviewed: 2026-09-05. 4 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | 35.5 in | ✓ Secondary source only | Whirlpool WRSC5536RZ Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit35.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRSC5536RZ Dimension Guide Aligned with case_width_in (35.5")Open original source ↗ Why this value was usedAligned with case_width_in (35.5") Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | 69 in | ✓ Secondary source only | Whirlpool WRSC5536RZ Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit69 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRSC5536RZ Dimension Guide Height to top of cabinet 69" (175.26 cm)Open original source ↗ Why this value was usedHeight to top of cabinet 69" (175.26 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 69.25 in | ✓ Secondary source only | Whirlpool WRSC5536RZ Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit69.25 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRSC5536RZ Dimension Guide Overall Height 691/4" (175.9 cm)Open original source ↗ Why this value was usedOverall Height 691/4" (175.9 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | 23.88 in | ✓ Verified — exact model | 36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSC5536RZ | Whirlpool Whirlpool | Retained specification excerpt: Depth Excluding Doors: 23.88 in | pth Closed Excluding Handles 28.375 in Depth Closed Including Hand | |
Value used by ExactFit23.88 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSC5536RZ | Whirlpool Depth Excluding Doors: 23.88 in | pth Closed Excluding Handles 28.375 in Depth Closed Including Handles 30.375 in Depth Excluding Doors 23.875 in Depth With Door Open 90 Degree 45.75 in Freezer Capacity Volume 7.19 cu. ft. GrOpen original source ↗ Why this value was usedDepth Excluding Doors: 23.88 in | pth Closed Excluding Handles 28.375 in Depth Closed Including Handles 30.375 in Depth Excluding Doors 23.875 in Depth With Door Open 90 Degree 45.75 in Freezer Capacity Volume 7.19 cu. ft. Gr Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 28.375 in | ✓ Secondary source only | Whirlpool WRSC5536RZ Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit28.375 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRSC5536RZ Dimension Guide Depth without handles 283/8" (72.07 cm)Open original source ↗ Why this value was usedDepth without handles 283/8" (72.07 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 30.375 in | ✓ Secondary source only | Whirlpool WRSC5536RZ Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit30.375 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRSC5536RZ Dimension Guide Depth with handles 303/8" (77.15 cm)Open original source ↗ Why this value was usedDepth with handles 303/8" (77.15 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 45.75 in | ✓ Secondary source only | Whirlpool WRSC5536RZ Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit45.75 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRSC5536RZ Dimension Guide Depth with door open 90° 453/4" (116.21 cm)Open original source ↗ Why this value was usedDepth with door open 90° 453/4" (116.21 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | 36.5 in | ✓ Verified — exact model | 36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSC5536RZ | Whirlpool Whirlpool | Retained specification excerpt: Cutout Width: 36.5 in | th 35.5 in Capacity 20.85 cu. ft. Cutout Depth 30.375 in Cutout Height 70.25 | |
Value used by ExactFit36.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSC5536RZ | Whirlpool Cutout Width: 36.5 in | th 35.5 in Capacity 20.85 cu. ft. Cutout Depth 30.375 in Cutout Height 70.25 in Cutout Width 36.5 in Depth 28.375 in Depth Closed Excluding Handles 28.375 in Depth Closed IncludingOpen original source ↗ Why this value was usedCutout Width: 36.5 in | th 35.5 in Capacity 20.85 cu. ft. Cutout Depth 30.375 in Cutout Height 70.25 in Cutout Width 36.5 in Depth 28.375 in Depth Closed Excluding Handles 28.375 in Depth Closed Including Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | 70.25 in | ✓ Verified — exact model | 36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSC5536RZ | Whirlpool Whirlpool | Retained specification excerpt: Cutout Height 70.25 in | |
Value used by ExactFit70.25 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSC5536RZ | Whirlpool Cutout Height 70.25 inOpen original source ↗ Why this value was usedCutout Height 70.25 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | 30.375 in | ✓ Verified — exact model | 36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSC5536RZ | Whirlpool Whirlpool | Retained specification excerpt: Cutout Depth 30.375 in | |
Value used by ExactFit30.375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSC5536RZ | Whirlpool Cutout Depth 30.375 inOpen original source ↗ Why this value was usedCutout Depth 30.375 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | Unknown | ? Not found | Whirlpool measurement source — local-cache manufacturer-family consensus Publisher not recorded | Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool measurement source — local-cache manufacturer-family consensus Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedThe retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.188 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | Unknown | ? Not found | Whirlpool measurement source — local-cache manufacturer-family consensus Publisher not recorded | Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool measurement source — local-cache manufacturer-family consensus Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedThe retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.188 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | 0.5 in | ✓ Verified — equivalent model · Calculated/inferred | KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io | Page 5 | |
Value used by ExactFit0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidenceKitchenAid KRSC336RPS Owner's Manual 1.27 cm) of space on each side and at the topOpen original source ↗ Why this value was used1.27 cm) of space on each side and at the top Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from KRSC336RPS appliesTarget model: WRSC5536RZ. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Top clearance. Relevant equivalence evidence: 1.27 cm) of space on each side and at the top. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | 1 in | ✓ Verified — equivalent model · Calculated/inferred | KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io | Page 5 | |
Value used by ExactFit1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidenceKitchenAid KRSC336RPS Owner's Manual 2.54 cm) of space behindOpen original source ↗ Why this value was used2.54 cm) of space behind Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from KRSC336RPS appliesTarget model: WRSC5536RZ. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Rear clearance. Relevant equivalence evidence: 2.54 cm) of space behind. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Hinge-side wall clearance | 2 in | ✓ Verified — equivalent model · Calculated/inferred | KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io | Page 5 | |
Value used by ExactFit2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidenceKitchenAid KRSC336RPS Owner's Manual next to a fixed wall, leave a 2" (5.08 cmOpen original source ↗ Why this value was usednext to a fixed wall, leave a 2" (5.08 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from KRSC336RPS appliesTarget model: WRSC5536RZ. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: next to a fixed wall, leave a 2" (5.08 cm. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | 35.5 in | ✓ Secondary source only | Whirlpool WRSC5536RZ Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit35.5 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRSC5536RZ Dimension Guide Width of cabinet 351/2" (90.17 cm)Open original source ↗ Why this value was usedWidth of cabinet 351/2" (90.17 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Adjoining-wall clearance (reviewed endpoint) | Unknown | ? Not found · Calculated/inferred | Whirlpool measurement source — local-cache manufacturer-family consensus Publisher not recorded | Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p | |
Value used by ExactFitUnknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Tall built-in family side clearance Confidence label: low. Primary evidenceWhirlpool measurement source — local-cache manufacturer-family consensus Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedA low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 0.1875 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
assets.skulytics.io · Dimension Guide · secondary model/source
Model numbers covered: WRSC5536RZ. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
7 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Whirlpool · Web source · exact model/source
Model numbers covered: WRSC5536RZ. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
4 displayed measurements supported: Depth without door; Minimum cutout width; Minimum cutout height; Minimum cutout depth.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Publisher not recorded · Retained document · Scope not established
Model numbers covered: Not explicitly retained. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
3 displayed measurements supported: Left-side ventilation clearance; Right-side ventilation clearance; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL unavailable in the record.
assets.skulytics.io · Owner's Manual · equivalent model/source
Model numbers covered: KRSC336RPS. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
3 displayed measurements supported: Top clearance; Rear clearance; Hinge-side wall clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.