Measurement evidence for Whirlpool WRFF5333PB

Value used by ExactFit

32.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.33-inch-wide-french-door-refrigerator-22-cu.-ft.wrff5333pb.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 32.62 in is the same printed dimension as 32 5/8 in (32.6
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 32.62 in is the same printed dimension as 32 5/8 in (32.625); every finish of the WRFF5333P family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 32.62 in is the same printed dimension as 32 5/8 in (32.625); every finish of the WRFF5333P family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 32.62 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: net Width: 32.62 in | ype Reach Through Handle Hidden Hinge Yes Reversible Door No ### Dimensions Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in, 32 in Depth Closed Inclu. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.33-inch-wide-french-door-refrigerator-22-cu.-ft.wrff5333pb.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 68.88 in is the same printed dimension as 68 7/8 in (68.8
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 68.88 in is the same printed dimension as 68 7/8 in (68.875); every finish of the WRFF5333P family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 68.88 in is the same printed dimension as 68 7/8 in (68.875); every finish of the WRFF5333P family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 68.88 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Cabinet: 68.88 in | 5 in Freezer Capacity Volume 6.45 cu. ft. Gross Weight 276 lbs Height 70.125 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 70.125 in Net Weight 265 lbs Total Refrigerator Cap. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.33-inch-wide-french-door-refrigerator-22-cu.-ft.wrff5333pb.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 70.12 in is the same printed dimension as 70 1/8 in (70.1
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 70.12 in is the same printed dimension as 70 1/8 in (70.125); every finish of the WRFF5333P family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 70.12 in is the same printed dimension as 70 1/8 in (70.125); every finish of the WRFF5333P family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 70.12 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Door Hinge: 70.12 in | u. ft. Gross Weight 276 lbs Height 70.125 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 70.125 in Net Weight 265 lbs Total Refrigerator Capacity Volume 22.1 cu. ft. Width 32.625. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.33-inch-wide-french-door-refrigerator-22-cu.-ft.wrff5333pb.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 28.12 in is the same printed dimension as 28 1/8 in (28.1
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 28.12 in is the same printed dimension as 28 1/8 in (28.125); every finish of the WRFF5333P family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 28.12 in is the same printed dimension as 28 1/8 in (28.125); every finish of the WRFF5333P family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 28.12 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Depth Excluding Doors: 28.12 in | luding Handles 31.34 in, 32 in Depth Closed Including Handles 33.31 in, 34.5 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 47.125 in Freezer Capacity Volume 6.45 cu. ft. G. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.34 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.33-inch-wide-french-door-refrigerator-22-cu.-ft.wrff5333pb.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Excluding Handles: 31.34 in | nge Yes Reversible Door No ### Dimensions Cabinet Width 3
Reviewed: 2026-09-04

Depth Closed Excluding Handles: 31.34 in | nge Yes Reversible Door No ### Dimensions Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in, 32 in Depth Closed Including Handles 33.31 in, 34.5 in Depth Excluding Doors 2

Why this value was used

Depth Closed Excluding Handles: 31.34 in | nge Yes Reversible Door No ### Dimensions Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in, 32 in Depth Closed Including Handles 33.31 in, 34.5 in Depth Excluding Doors 2

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.31 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.33-inch-wide-french-door-refrigerator-22-cu.-ft.wrff5333pb.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Including Handles: 33.31 in | et Width 32.625 in Depth 34.5 in Depth Closed Excluding H
Reviewed: 2026-09-04

Depth Closed Including Handles: 33.31 in | et Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in, 32 in Depth Closed Including Handles 33.31 in, 34.5 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 47.125

Why this value was used

Depth Closed Including Handles: 33.31 in | et Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in, 32 in Depth Closed Including Handles 33.31 in, 34.5 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 47.125

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

47.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.33-inch-wide-french-door-refrigerator-22-cu.-ft.wrff5333pb.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth With Door Open 90 = 47.125 in | epth Closed Including Handles 33.31 in, 34.5 in Depth Excludin
Reviewed: 2026-09-04

Depth With Door Open 90 = 47.125 in | epth Closed Including Handles 33.31 in, 34.5 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 47.125 in Freezer Capacity Volume 6.45 cu. ft. Gross Weight 276 lbs Height 70.125 in Heig

Why this value was used

Depth With Door Open 90 = 47.125 in | epth Closed Including Handles 33.31 in, 34.5 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 47.125 in Freezer Capacity Volume 6.45 cu. ft. Gross Weight 276 lbs Height 70.125 in Heig

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 32.625 + 2 * 0.5

Confidence label: medium.

Primary evidence

Whirlpool measurement source — p.33-inch-wide-french-door-refrigerator-22-cu.-ft.wrff5333pb.html + side gap from the maker's document
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 33.625 in from product width 32.625 in and explicit 0.5 in clearance o
Reviewed: 2026-09-04

Derived minimum opening width 33.625 in from product width 32.625 in and explicit 0.5 in clearance on each side.

Why this value was used

Derived minimum opening width 33.625 in from product width 32.625 in and explicit 0.5 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 32.625 + 2 * 0.5.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Whirlpool measurement source — 105710667.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 70.62 in is the same printed dimension as 70 5/8 in (70.625); every finish of the WRFF5333P family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 70.62 in is the same printed dimension as 70 5/8 in (70.625); every finish of the WRFF5333P family carries the same value to within 0.02 in. Source kept as stored. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — 105529091.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 29.12 in is the same printed dimension as 29 1/8 in (29.125); every finish of the WRFF5333P family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 29.12 in is the same printed dimension as 29 1/8 in (29.125); every finish of the WRFF5333P family carries the same value to within 0.02 in. Source kept as stored. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

• 29.12 in — superseded

  The same document as the value used above; page 8. Model scope: not separately recorded. Raw value: Whirlpool opening envelope: 28.12 + 1.0 = 29.12 in.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool measurement source — 105710667.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-10-29

Maytag MRFF5033PZ manual (same chassis): "allow for 1/2" (1.25 cm) of space on each side and at the top".

Why this value was used

Maytag MRFF5033PZ manual (same chassis): "allow for 1/2" (1.25 cm) of space on each side and at the top".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool measurement source — 105710667.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-10-29

Maytag MRFF5033PZ manual (same chassis): "allow for 1/2" (1.25 cm) of space on each side and at the top".

Why this value was used

Maytag MRFF5033PZ manual (same chassis): "allow for 1/2" (1.25 cm) of space on each side and at the top".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Whirlpool measurement source — 105710667.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-05

1.25 cm) of space on each side and at the top

Why this value was used

1.25 cm) of space on each side and at the top Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105529091.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-05

Allow for 1" (2.54 cm) of space behind the refrigerator.

Why this value was used

Allow for 1" (2.54 cm) of space behind the refrigerator.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.5 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Whirlpool measurement source — 105710667.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave 2 1/2" (6.3 cm

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave 2 1/2" (6.3 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.33-inch-wide-french-door-refrigerator-22-cu.-ft.wrff5333pb.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width = 32.625 in | le Type Reach Through Handle Hidden Hinge Yes Reversible Door No ### Dim
Reviewed: 2026-09-04

Cabinet Width = 32.625 in | le Type Reach Through Handle Hidden Hinge Yes Reversible Door No ### Dimensions Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in, 32 in Depth Closed Inclu

Why this value was used

Cabinet Width = 32.625 in | le Type Reach Through Handle Hidden Hinge Yes Reversible Door No ### Dimensions Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in, 32 in Depth Closed Inclu

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.