Measurement evidence for Whirlpool WRB533CZJZ

Value used by ExactFit

24.4375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105517657.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-27

Printed width across the closed doors 24 7/16 in (621 mm); the case width is 24 in (610 mm).

Why this value was used

Printed width across the closed doors 24 7/16 in (621 mm); the case width is 24 in (610 mm).

Other evidence found

• 24 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: net Width: 24.0 in | om Freezer ### Dispenser Details Dispenser Type No Dispenser ### Dimensions Cabinet Width 24 in Depth 27.8125 in Depth Closed Excluding Handles 27.813 in Depth Closed Includin. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.3125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105517657.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-27

Printed case height 70 5/16 in (1786 mm); the sheet names WRB533CZJB, WRB533CZJW and WRB533CZJZ.

Why this value was used

Printed case height 70 5/16 in (1786 mm); the sheet names WRB533CZJB, WRB533CZJW and WRB533CZJZ.

Other evidence found

• 68.5 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Cabinet: 68.5 in | 49 in Freezer Capacity Volume 3.62 cu. ft. Gross Weight 160.5 lbs Height 71 in Height To Top Of Cabinet 68.5 in Height To Top Of Door Hinge 71 in Net Weight 154.8 lbs Refrigerator Capacity Vo. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

71 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-bottom-freezer-refrigerator-12.9-cu.-ft.wrb533czjz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Door Hinge: 71.0 in | 62 cu. ft. Gross Weight 160.5 lbs Height 71 in Height To Top
Reviewed: 2026-09-04

Height To Top Of Door Hinge: 71.0 in | 62 cu. ft. Gross Weight 160.5 lbs Height 71 in Height To Top Of Cabinet 68.5 in Height To Top Of Door Hinge 71 in Net Weight 154.8 lbs Refrigerator Capacity Volume 9.36 Total Refrigerator Capac

Why this value was used

Height To Top Of Door Hinge: 71.0 in | 62 cu. ft. Gross Weight 160.5 lbs Height 71 in Height To Top Of Cabinet 68.5 in Height To Top Of Door Hinge 71 in Net Weight 154.8 lbs Refrigerator Capacity Volume 9.36 Total Refrigerator Capac

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-bottom-freezer-refrigerator-12.9-cu.-ft.wrb533czjz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors: 24.0 in | pth Closed Excluding Handles 27.813 in Depth Closed Including Handl
Reviewed: 2026-09-04

Depth Excluding Doors: 24.0 in | pth Closed Excluding Handles 27.813 in Depth Closed Including Handles 27.813 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 3.62 cu. ft. Gross

Why this value was used

Depth Excluding Doors: 24.0 in | pth Closed Excluding Handles 27.813 in Depth Closed Including Handles 27.813 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 3.62 cu. ft. Gross

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

27.8125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-bottom-freezer-refrigerator-12.9-cu.-ft.wrb533czjz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 27.81 in is the same printed dimension as 27 13/16 in (27
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 27.81 in is the same printed dimension as 27 13/16 in (27.8125); every finish of the WRB533CZJ family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 27.81 in is the same printed dimension as 27 13/16 in (27.8125); every finish of the WRB533CZJ family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 27.81 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Depth Closed Excluding Handles: 27.81 in | Dispenser Type No Dispenser ### Dimensions Cabinet Width 24 in Depth 27.8125 in Depth Closed Excluding Handles 27.813 in Depth Closed Including Handles 27.813 in Depth Excluding Doors 24 in Depth With. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

27.8125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-bottom-freezer-refrigerator-12.9-cu.-ft.wrb533czjz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 27.81 in is the same printed dimension as 27 13/16 in (27
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 27.81 in is the same printed dimension as 27 13/16 in (27.8125); every finish of the WRB533CZJ family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 27.81 in is the same printed dimension as 27 13/16 in (27.8125); every finish of the WRB533CZJ family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 27.81 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Depth Closed Including Handles: 27.81 in | s Cabinet Width 24 in Depth 27.8125 in Depth Closed Excluding Handles 27.813 in Depth Closed Including Handles 27.813 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capaci. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool measurement source — wrb533czjz
groveappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: dth | 24 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Height
Reviewed: 2026-09-04

dth | 24 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Height To Top Of Door Hinge | 71 in | | Depth

Why this value was used

dth | 24 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Height To Top Of Door Hinge | 71 in | | Depth

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 24.0 + 2 * 0.5

Confidence label: medium.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-bottom-freezer-refrigerator-12.9-cu.-ft.wrb533czjz.html + 105517644.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-04

Minimum opening derived from exact product width plus explicit symmetric side spacing: 24.0 + 2 * 0.5 = 25.0 in. Side evidence: To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side

Why this value was used

Minimum opening derived from exact product width plus explicit symmetric side spacing: 24.0 + 2 * 0.5 = 25.0 in. Side evidence: To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side Calculation or inference: 24.0 + 2 * 0.5.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

72.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Whirlpool measurement source — 105517642.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Whirlpool opening envelope: max(68.5, 71.0) + 1.5 = 72.5 in.

Why this value was used

Whirlpool opening envelope: max(68.5, 71.0) + 1.5 = 72.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — dimension-guide-w11440352.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 24.0 in plus documented rear clearance 1.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 24.0 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRB533CZJ***

Confidence label: high.

Primary evidence

Whirlpool measurement source — dimension-guide-w11440352.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern WRB533CZJ***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRB533CZJ***

Confidence label: high.

Primary evidence

Whirlpool measurement source — dimension-guide-w11440352.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern WRB533CZJ***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105517642.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser

Why this value was used

Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRB533CZJ***

Confidence label: medium.

Primary evidence

Whirlpool measurement source — dimension-guide-w11440352.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1" at the back

Why this value was used

1" at the back Calculation or inference: documented DOE model pattern WRB533CZJ***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.244 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: medium.

Primary evidence

Whirlpool measurement source — 105517642.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). space at the back for the water line connections. | If you are installing your refrigerator next to a fixed wall, leave 2 1/4 (5.7 cm) on the hinge side | to allow the door to swing open.

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). space at the back for the water line connections. | If you are installing your refrigerator next to a fixed wall, leave 2 1/4 (5.7 cm) on the hinge side | to allow the door to swing open.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

2.25 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105517657.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-27

Door fully swung open to its 115 degree maximum aperture: 2 1/4 in.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

Door fully swung open to its 115 degree maximum aperture: 2 1/4 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

24 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.24-inch-wide-bottom-freezer-refrigerator-12.9-cu.-ft.wrb533czjz.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width = 24.0 in | Bottom Freezer ### Dispenser Details Dispenser Type No Dispenser ### Dimen
Reviewed: 2026-09-04

Cabinet Width = 24.0 in | Bottom Freezer ### Dispenser Details Dispenser Type No Dispenser ### Dimensions Cabinet Width 24 in Depth 27.8125 in Depth Closed Excluding Handles 27.813 in Depth Closed Includin

Why this value was used

Cabinet Width = 24.0 in | Bottom Freezer ### Dispenser Details Dispenser Type No Dispenser ### Dimensions Cabinet Width 24 in Depth 27.8125 in Depth Closed Excluding Handles 27.813 in Depth Closed Includin

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.