Measurement evidence for Whirlpool WRB329DMBM

Value used by ExactFit

29.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105519293.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

H x W x D) 67" x 29-5/8" x 33-3/8"

Why this value was used

H x W x D) 67" x 29-5/8" x 33-3/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.30-inches-wide-bottom-freezer-refrigerator-with-spillguard-glass-shelves-18.7-cu.-ft.wrb329dmbm.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 65.5 in. Context: ee 59 i
Reviewed: 2026-09-04

Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 65.5 in. Context: ee 59 in Freezer Capacity Volume 5.73 cu. ft. Gross Weight 237 lbs Height 67 in Height To Top Of Cabinet 65.5 in Height To Top Of Door Hinge 67 in Net Weight 0 lbs Refrigerator Capacity Volume

Why this value was used

Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 65.5 in. Context: ee 59 in Freezer Capacity Volume 5.73 cu. ft. Gross Weight 237 lbs Height 67 in Height To Top Of Cabinet 65.5 in Height To Top Of Door Hinge 67 in Net Weight 0 lbs Refrigerator Capacity Volume

Other evidence found

• 67 in — superseded

  Document 105519293.pdf; page 1. Model scope: not separately recorded. Raw value: H x W x D) 67" x 29-5/8" x 33-3/8". The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

67 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105519293.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

H x W x D) 67" x 29-5/8" x 33-3/8"

Why this value was used

H x W x D) 67" x 29-5/8" x 33-3/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.30-inches-wide-bottom-freezer-refrigerator-with-spillguard-glass-shelves-18.7-cu.-ft.wrb329dmbm.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 28.12 in is the same printed dimension as 28 1/8 in (28.1
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 28.12 in is the same printed dimension as 28 1/8 in (28.125); every finish of the WRB329DMB family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 28.12 in is the same printed dimension as 28 1/8 in (28.125); every finish of the WRB329DMB family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 28.12 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Depth Excluding Doors: 28.12 in | pth Closed Excluding Handles 30.875 in Depth Closed Including Handles 33.375 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 59 in Freezer Capacity Volume 5.73 cu. ft. Gross. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

30.875 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — p.30-inches-wide-bottom-freezer-refrigerator-with-spillguard-glass-shelves-18.7-cu.-ft.wrb329dmbm.html
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 30.88 in is the same printed dimension as 30 7/8 in (30.8
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 30.88 in is the same printed dimension as 30 7/8 in (30.875); every finish of the WRB329DMB family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 30.88 in is the same printed dimension as 30 7/8 in (30.875); every finish of the WRB329DMB family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 33.375 in — superseded

  Document 105519293.pdf; page 1. Model scope: not separately recorded. Raw value: H x W x D) 67" x 29-5/8" x 33-3/8". The final reviewed registry supersedes this earlier audit value.

• 30.88 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 30.88 in. Context: n Capacity 18.67 cu. ft. Cutout Height 67 in Cutout Width 30 in Depth 33.375 in Depth Closed Excluding Handles 30.875 in Depth Closed Including Handles 33.375 in Depth Excluding Doors 28.125 in Depth . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.375 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105519293.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

H x W x D) 67" x 29-5/8" x 33-3/8"

Why this value was used

H x W x D) 67" x 29-5/8" x 33-3/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

59 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105519293.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth with Door Open 90° 59"

Why this value was used

Depth with Door Open 90° 59"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

30.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in + 2 * side_ventilation_clearance_in

Confidence label: high.

Calculation inputs: Left-side ventilation clearance; Cabinet case width;

Primary evidence

Whirlpool measurement source — 105519256.pdf
Whirlpool · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-18

Feature sheet: Product Dimensions (H x W x D) 67" x 29-5/8" x 33-3/8"; Cutout Dimensions "Allow extra 1/2" on sides and top". 29 5/8 + 2 x 1/2 = 30 5/8 in. Replaces the whirlpool.com "Cutout Width 30.0 in". Owner decision 2026-09-19.

Why this value was used

Feature sheet: Product Dimensions (H x W x D) 67" x 29-5/8" x 33-3/8"; Cutout Dimensions "Allow extra 1/2" on sides and top". 29 5/8 + 2 x 1/2 = 30 5/8 in. Replaces the whirlpool.com "Cutout Width 30.0 in". Owner decision 2026-09-19. Calculation or inference: case_width_in + 2 * side_ventilation_clearance_in.

Other evidence found

• 30 in — superseded

  www.whirlpool.com; location not retained. Model scope: not separately recorded. Raw value: Cutout Width: 30.0 in | # Dimensions Cabinet Width 29.625 in Capacity 18.67 cu. ft. Cutout Height 67 in Cutout Width 30 in Depth 33.375 in Depth Closed Excluding Handles 30.875 in Depth Closed Including. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

67.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: high.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Whirlpool measurement source — 105519256.pdf
Whirlpool · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-18

Feature sheet: Product Dimensions height 67"; Cutout Dimensions "Allow extra 1/2" on sides and top". 67 + 1/2 = 67 1/2 in. Replaces the whirlpool.com "Cutout Height 67 in", which left no top gap. Owner decision 2026-09-19.

Why this value was used

Feature sheet: Product Dimensions height 67"; Cutout Dimensions "Allow extra 1/2" on sides and top". 67 + 1/2 = 67 1/2 in. Replaces the whirlpool.com "Cutout Height 67 in", which left no top gap. Owner decision 2026-09-19. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — WRB322DMBB.html
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 29.12 in is the same printed dimension as 29 1/8 in (29.1
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 29.12 in is the same printed dimension as 29 1/8 in (29.125); every finish of the WRB329DMB family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 29.12 in is the same printed dimension as 29 1/8 in (29.125); every finish of the WRB329DMB family carries the same value to within 0.02 in. Source kept as stored. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Whirlpool measurement source — 105161571.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

1.25 cm) of space on each side

Why this value was used

1.25 cm) of space on each side Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Whirlpool measurement source — 105161571.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

1.25 cm) of space on each side

Why this value was used

1.25 cm) of space on each side Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: model-series prefix WRB32; 2 direct seeds; unanimous value 0.5

Confidence label: medium.

Primary evidence

Whirlpool measurement source — WRB322DMBB.html
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free 5-character model-series consensus (WRB32) from 2 directly evidenced models; example W
Reviewed: 2026-09-05

Conflict-free 5-character model-series consensus (WRB32) from 2 directly evidenced models; example Whirlpool WRB322DMBB: Top: 1/2"

Why this value was used

Conflict-free 5-character model-series consensus (WRB32) from 2 directly evidenced models; example Whirlpool WRB322DMBB: Top: 1/2" Calculation or inference: model-series prefix WRB32; 2 direct seeds; unanimous value 0.5.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: model-series prefix WRB32; 2 direct seeds; unanimous value 1.0

Confidence label: medium.

Primary evidence

Whirlpool measurement source — WRB322DMBB.html
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free 5-character model-series consensus (WRB32) from 2 directly evidenced models; example W
Reviewed: 2026-09-05

Conflict-free 5-character model-series consensus (WRB32) from 2 directly evidenced models; example Whirlpool WRB322DMBB: Back: 1"

Why this value was used

Conflict-free 5-character model-series consensus (WRB32) from 2 directly evidenced models; example Whirlpool WRB322DMBB: Back: 1" Calculation or inference: model-series prefix WRB32; 2 direct seeds; unanimous value 1.0.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.5 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Whirlpool measurement source — 105161571.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave 21/2" (6.3 cm

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave 21/2" (6.3 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool installation document — 105519293.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

H x W x D) 67" x 29-5/8" x 33-3/8"

Why this value was used

H x W x D) 67" x 29-5/8" x 33-3/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.