This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)
Last reviewed: 2026-09-07. 2 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | 23.75 in | ✓ Secondary source only | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 2 | |
Value used by ExactFit23.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceThermador T24IR905SP Product Specification Exact-model Thermador Freedom column sheet.Open original source ↗ Why this value was usedExact-model Thermador Freedom column sheet. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | 83.75 in | ✓ Secondary source only | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 2 | |
Value used by ExactFit83.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceThermador T24IR905SP Product Specification Exact-model Thermador Freedom column sheet.Open original source ↗ Why this value was usedExact-model Thermador Freedom column sheet. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 83.75 in | ✓ Secondary source only | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 2 | |
Value used by ExactFit83.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceThermador T24IR905SP Product Specification Exact-model Thermador Freedom column sheet.Open original source ↗ Why this value was usedExact-model Thermador Freedom column sheet. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | 24 in | ✓ Secondary source only | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 2 | |
Value used by ExactFit24 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceThermador T24IR905SP Product Specification Exact-model Thermador Freedom column sheet.Open original source ↗ Why this value was usedExact-model Thermador Freedom column sheet. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 24.75 in | ✓ Conflicting sources — resolved · Calculated/inferred | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 2 | |
Value used by ExactFit24.75 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: 24-in appliance + standard 3/4-in panel Confidence label: medium. Primary evidenceThermador T24IR905SP Product Specification Standard panel-ready installed configuration.Open original source ↗ Why this value was usedStandard panel-ready installed configuration. Calculation or inference: 24-in appliance + standard 3/4-in panel. Other evidence found
Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 25.75 in | ✓ Conflicting sources — resolved · Calculated/inferred | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 2 | |
Value used by ExactFit25.75 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: 24.75-in installed depth + standard 1-in handle Confidence label: medium. Primary evidenceThermador T24IR905SP Product Specification Custom handle projection varies; standardized scenario.Open original source ↗ Why this value was usedCustom handle projection varies; standardized scenario. Calculation or inference: 24.75-in installed depth + standard 1-in handle. Other evidence found
Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 26.6875 in | ✓ Secondary source only | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 2 | |
Value used by ExactFit26.6875 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceThermador T24IR905SP Product Specification Exact top-view drawing labels the complete rear-plane-to-open-door envelope 26-11/16" (677 mm).Open original source ↗ Why this value was usedExact top-view drawing labels the complete rear-plane-to-open-door envelope 26-11/16" (677 mm). Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | 24 in | ✓ Secondary source only | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 2 | |
Value used by ExactFit24 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceThermador T24IR905SP Product Specification Exact-model Thermador Freedom column sheet.Open original source ↗ Why this value was usedExact-model Thermador Freedom column sheet. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | 84 in | ✓ Secondary source only | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 1 | |
Value used by ExactFit84 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceThermador T24IR905SP Product Specification Cutout Size (H x W x D) (in.) 84"Open original source ↗ Why this value was usedCutout Size (H x W x D) (in.) 84" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | 25 in | ✓ Secondary source only | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 1 | |
Value used by ExactFit25 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceThermador T24IR905SP Product Specification Exact product sheet required cutout is 25 in deep; replaces the appliance-depth value 24 in.Open original source ↗ Why this value was usedExact product sheet required cutout is 25 in deep; replaces the appliance-depth value 24 in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | 0.125 in | ✓ Secondary source only · Calculated/inferred | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 2 | |
Value used by ExactFit0.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: (min_cutout_width_in - case_width_in) / 2 Confidence label: medium. Calculation inputs: Cabinet case width; Minimum cutout width; Primary evidenceThermador T24IR905SP Product Specification Nominal opening is 1/4 in wider than the appliance, giving 1/8 in per side.Open original source ↗ Why this value was usedNominal opening is 1/4 in wider than the appliance, giving 1/8 in per side. Calculation or inference: (min_cutout_width_in - case_width_in) / 2. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | 0.125 in | ✓ Secondary source only · Calculated/inferred | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 2 | |
Value used by ExactFit0.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: (min_cutout_width_in - case_width_in) / 2 Confidence label: medium. Calculation inputs: Cabinet case width; Minimum cutout width; Primary evidenceThermador T24IR905SP Product Specification Nominal opening is 1/4 in wider than the appliance, giving 1/8 in per side.Open original source ↗ Why this value was usedNominal opening is 1/4 in wider than the appliance, giving 1/8 in per side. Calculation or inference: (min_cutout_width_in - case_width_in) / 2. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | 0.25 in | ✓ Secondary source only · Calculated/inferred | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 1 | |
Value used by ExactFit0.25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: min_cutout_height_in - height_hinge_in Confidence label: medium. Calculation inputs: Height with hinge / controlling height; Minimum cutout height; Primary evidenceThermador T24IR905SP Product Specification 84 in opening minus 83 3/4 in appliance height = 1/4 in.Open original source ↗ Why this value was used84 in opening minus 83 3/4 in appliance height = 1/4 in. Calculation or inference: min_cutout_height_in - height_hinge_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | 1 in | ✓ Secondary source only · Calculated/inferred | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 1 | |
Value used by ExactFit1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: min_cutout_depth_in - depth_case_only_in Confidence label: medium. Calculation inputs: Depth without door; Minimum cutout depth; Primary evidenceThermador T24IR905SP Product Specification 25 in required cutout minus 24 in appliance depth = 1 in.Open original source ↗ Why this value was used25 in required cutout minus 24 in appliance depth = 1 in. Calculation or inference: min_cutout_depth_in - depth_case_only_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Hinge-side wall clearance | Unknown | ? Not found · Calculated/inferred | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 2 | |
Value used by ExactFitUnknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: shared Thermador/Bosch Freedom flat-hinge architecture Confidence label: medium. Primary evidenceThermador T24IR905SP Product Specification Freedom flat-hinge family clearance transferred from the matching BSH flat-hinge planning geometry.Open original source ↗ Why this value was usedThe stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 0.75 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | 23.75 in | ✓ Secondary source only | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 2 | |
Value used by ExactFit23.75 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceThermador T24IR905SP Product Specification Exact-model Thermador Freedom column sheet.Open original source ↗ Why this value was usedExact-model Thermador Freedom column sheet. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Adjoining-wall clearance (reviewed endpoint) | 0.125 in | ✓ Secondary source only | Thermador T24IR905SP Product Specification assets.skulytics.io | Page 2 | |
Value used by ExactFit0.125 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceThermador T24IR905SP Product Specification Exact-model Thermador Freedom column sheet.Open original source ↗ Why this value was usedExact-model Thermador Freedom column sheet. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Selected: 24.75 in. Earlier retained values: 23.75 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Standard panel-ready installed configuration. Calculation or inference: 24-in appliance + standard 3/4-in panel.
View source scope, location, and impact on fitSelected: 25.75 in. Earlier retained values: 23.75 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Custom handle projection varies; standardized scenario. Calculation or inference: 24.75-in installed depth + standard 1-in handle.
View source scope, location, and impact on fitNot found for safe fit use. Sources retained: 105166510.pdf. Related-model record: T24IR905SP.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
assets.skulytics.io · Product Specification · secondary model/source
Model numbers covered: T24IR905SP. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
16 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Minimum cutout width; Minimum cutout height; Minimum cutout depth; Left-side ventilation clearance; Right-side ventilation clearance; Top clearance; Rear clearance; Hinge-side wall clearance; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Product Specification · secondary model/source
Model numbers covered: T24IR905SP. Publication/revision date: Not recorded. Reviewed: 2026-09-07.
1 displayed measurements supported: Depth with doors open at 90°.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Evidence reflects the sources reviewed on 2026-09-07. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.