This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-09-05. 5 retained source records. 0 unresolved conflicts. Not every fit-critical input is supported.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
ExactFit does not have sufficient evidence for every fit-critical measurement. The fit checker will return Uncertain unless a known measurement already proves that the model does not fit.
Measurements and supporting evidence
Measurement
Value used
Evidence status
Primary source
Location
Details
Overall width
27.625 in
✓ Verified — exact model
18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel Silver | Samsung US Samsung
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel Silver | Samsung US Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Reviewed exact-model cached label: Width = 27.625 in. Context: 3?$ORIGIN_JPG$)   Width 27.625 Inches \+ 3 inches for open door  Height
Reviewed exact-model cached label: Width = 27.625 in. Context: 3?$ORIGIN_JPG$)  Width 27.625 Inches \+ 3 inches for open door  Height
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel Silver | Samsung US Samsung
Retained specification excerpt: Height without Hinge: 66.88 in | D: 32 3/4" Net Depth with Door Handle 31 7/8" Net Height with Hinge
Value used by ExactFit
66.88 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel Silver | Samsung US Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Height without Hinge: 66.88 in | D: 32 3/4" Net Depth with Door Handle 31 7/8" Net Height with Hinge Reviewed: 2026-09-04
Height without Hinge: 66.88 in | D: 32 3/4" Net Depth with Door Handle 31 7/8" Net Height with Hinge 66 7/8" Net Height without Hinge 66 7/8" Net Depth w/o Door Handle 31.875 Width 27 5/8" Height 66 7/8" Fridge-Side Conve
Height without Hinge: 66.88 in | D: 32 3/4" Net Depth with Door Handle 31 7/8" Net Height with Hinge 66 7/8" Net Height without Hinge 66 7/8" Net Depth w/o Door Handle 31.875 Width 27 5/8" Height 66 7/8" Fridge-Side Conve
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel Silver | Samsung US Samsung
Retained specification excerpt: Height with Hinge: 66.88 in | ensions W: 28 3/4" H: 70 1/4" D: 32 3/4" Net Depth with Door Handle 31
Value used by ExactFit
66.88 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel Silver | Samsung US Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Height with Hinge: 66.88 in | ensions W: 28 3/4" H: 70 1/4" D: 32 3/4" Net Depth with Door Handle 31 Reviewed: 2026-09-04
Height with Hinge: 66.88 in | ensions W: 28 3/4" H: 70 1/4" D: 32 3/4" Net Depth with Door Handle 31 7/8" Net Height with Hinge 66 7/8" Net Height without Hinge 66 7/8" Net Depth w/o Door Handle 31.875 Width 27 5/8"
Height with Hinge: 66.88 in | ensions W: 28 3/4" H: 70 1/4" D: 32 3/4" Net Depth with Door Handle 31 7/8" Net Height with Hinge 66 7/8" Net Height without Hinge 66 7/8" Net Depth w/o Door Handle 31.875 Width 27 5/8"
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel Silver | Samsung US Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Official Samsung cached specification: depth_case_only_in = 28.625 in; source_id=30079 Reviewed: 2026-09-04
Official Samsung cached specification: depth_case_only_in = 28.625 in; source_id=30079
Official Samsung cached specification: depth_case_only_in = 28.625 in; source_id=30079
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel Silver | Samsung US Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Official Samsung cached specification: depth_less_handles_in = 31.875 in; source_id=30079 Reviewed: 2026-09-04
Official Samsung cached specification: depth_less_handles_in = 31.875 in; source_id=30079
18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel Silver | Samsung US Samsung
Retained specification excerpt: Depth with Door Handle: 31.88 in | 66 7/8" H x 28 5/8" D Shipping Dimensions W: 28 3/4" H: 70 1/4"
Value used by ExactFit
31.88 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel Silver | Samsung US Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth with Door Handle: 31.88 in | 66 7/8" H x 28 5/8" D Shipping Dimensions W: 28 3/4" H: 70 1/4" Reviewed: 2026-09-04
Depth with Door Handle: 31.88 in | 66 7/8" H x 28 5/8" D Shipping Dimensions W: 28 3/4" H: 70 1/4" D: 32 3/4" Net Depth with Door Handle 31 7/8" Net Height with Hinge 66 7/8" Net Height without Hinge 66 7/8" Net Depth w/o Do
Depth with Door Handle: 31.88 in | 66 7/8" H x 28 5/8" D Shipping Dimensions W: 28 3/4" H: 70 1/4" D: 32 3/4" Net Depth with Door Handle 31 7/8" Net Height with Hinge 66 7/8" Net Height without Hinge 66 7/8" Net Depth w/o Do
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
RT70F18LASRAA | 18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel | Samsung Business Samsung
Retained specification excerpt: Product Dimensions with Doors Open: 27 5/8" W x 66 7/8" H x 57 1/8" D.
Value used by ExactFit
57.125 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
RT70F18LASRAA | 18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel | Samsung Business Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Product Dimensions with Doors Open: 27 5/8" W x 66 7/8" H x 57 1/8" D. Reviewed: 2026-09-04
Product Dimensions with Doors Open: 27 5/8" W x 66 7/8" H x 57 1/8" D.
Retained specification excerpt: Derived minimum opening width 28.375 in from product width 27.625 in and explicit 0.375 in clearance
Value used by ExactFit
Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 27.625 + 2 * 0.375
Confidence label: medium.
Primary evidence
Samsung measurement source — https://www.samsung.com/us/refrigerators/top-freezer/18-cu-ft-top-freezer-refrigerator-with-ice-maker-in-stainless-steel-sku-rt70f18lasraa + local-cache manufacturer-family consensus Samsung · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Derived minimum opening width 28.375 in from product width 27.625 in and explicit 0.375 in clearance Reviewed: 2026-09-04
Derived minimum opening width 28.375 in from product width 27.625 in and explicit 0.375 in clearance on each side.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
Retained research value: 28.375 in. It is preserved for audit but not accepted as a safe fit input.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
RT70F18LASR images.webfronts.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Samsung installation envelope: 66.88 in appliance endpoint + 2 in clearance = 68.88 in. Reviewed: 2026-09-05
Samsung installation envelope: 66.88 in appliance endpoint + 2 in clearance = 68.88 in.
Samsung installation envelope: 66.88 in appliance endpoint + 2 in clearance = 68.88 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
RT70F18LASR images.webfronts.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Samsung installation envelope: 28.625 in appliance endpoint + 2 in clearance = 30.625 in. Reviewed: 2026-09-05
Samsung installation envelope: 28.625 in appliance endpoint + 2 in clearance = 30.625 in.
Samsung installation envelope: 28.625 in appliance endpoint + 2 in clearance = 30.625 in. Calculation or inference: depth_case_only_in + rear_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Samsung measurement source — local-cache manufacturer-family consensus Publisher not recorded
Retained specification excerpt: Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pa
Value used by ExactFit
Unknown · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Samsung measurement source — local-cache manufacturer-family consensus Publisher not recorded · Retained document Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pa Reviewed: 2026-09-05
Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pattern.
The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.
Why this value was used
The retained record does not establish source scope or a resolvable supporting source.
Retained research value: 0.375 in. It is preserved for audit but not accepted as a safe fit input.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Samsung measurement source — local-cache manufacturer-family consensus Publisher not recorded
Retained specification excerpt: Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pa
Value used by ExactFit
Unknown · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Samsung measurement source — local-cache manufacturer-family consensus Publisher not recorded · Retained document Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pa Reviewed: 2026-09-05
Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pattern.
The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.
Why this value was used
The retained record does not establish source scope or a resolvable supporting source.
Retained research value: 0.375 in. It is preserved for audit but not accepted as a safe fit input.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Cached exact-model result: Allow a 2" minimum clearance at sides and top [cache: C:\Source Code\wind
Value used by ExactFit
2 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
RT70F18LASR images.webfronts.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Cached exact-model result: Allow a 2" minimum clearance at sides and top [cache: C:\Source Code\wind Reviewed: 2026-09-05
Cached exact-model result: Allow a 2" minimum clearance at sides and top [cache: C:\Source Code\windsurf\Python\ExactFit\artifacts\refrigerator_tavily_missing_20260820\6d81b52e85eb0ba66493dc3ee8c2626a906d7ec508446de0f53403a03abc5f82.json]
Cached exact-model result: Allow a 2" minimum clearance at sides and top [cache: C:\Source Code\windsurf\Python\ExactFit\artifacts\refrigerator_tavily_missing_20260820\6d81b52e85eb0ba66493dc3ee8c2626a906d7ec508446de0f53403a03abc5f82.json]
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
RT70F18LASR images.webfronts.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Cached exact-model result: Allow 2" minimum clearance at rear [cache: C:\Source Code\windsurf\Python Reviewed: 2026-09-05
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Cached exact-model result: Allow 2" of clearance on hinge side [cache: C:\Source Code\windsurf\Pytho
Value used by ExactFit
2 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
RT70F18LASR images.webfronts.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Cached exact-model result: Allow 2" of clearance on hinge side [cache: C:\Source Code\windsurf\Pytho Reviewed: 2026-09-05
Cached exact-model result: Allow 2" of clearance on hinge side [cache: C:\Source Code\windsurf\Python\ExactFit\artifacts\refrigerator_tavily_missing_20260820\6d81b52e85eb0ba66493dc3ee8c2626a906d7ec508446de0f53403a03abc5f82.json]
Cached exact-model result: Allow 2" of clearance on hinge side [cache: C:\Source Code\windsurf\Python\ExactFit\artifacts\refrigerator_tavily_missing_20260820\6d81b52e85eb0ba66493dc3ee8c2626a906d7ec508446de0f53403a03abc5f82.json]
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel Silver | Samsung US Samsung
Retained specification excerpt: Low-confidence same-appliance width mapping: case_width_in=27.625 in from width_doors_closed_in.
Value used by ExactFit
Unknown · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: case_width_in mapped from populated width_doors_closed_in; doors do not materially change closed product width
Confidence label: low.
Primary evidence
18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel Silver | Samsung US Samsung · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Low-confidence same-appliance width mapping: case_width_in=27.625 in from width_doors_closed_in. Reviewed: 2026-09-04
Low-confidence same-appliance width mapping: case_width_in=27.625 in from width_doors_closed_in.
Samsung measurement source — local-cache manufacturer-family consensus Publisher not recorded
Retained specification excerpt: Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pa
Value used by ExactFit
Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Strong modal installation clearance for this manufacturer family
Confidence label: low.
Primary evidence
Samsung measurement source — local-cache manufacturer-family consensus Publisher not recorded · Retained document Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pa Reviewed: 2026-09-04
Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pattern.
The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.
Why this value was used
A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.
Retained research value: 0.375 in. It is preserved for audit but not accepted as a safe fit input.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Not found for safe fit use. Sources retained: https://www.samsung.com/us/refrigerators/top-freezer/18-cu-ft-top-freezer-refrigerator-with-ice-maker-in-stainless-steel-sku-rt70f18lasraa + local-cache manufacturer-family consensus. Related-model record: RT70F18LASRAA.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Left-side ventilation clearance
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Right-side ventilation clearance
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Cabinet case width
Not found for safe fit use. Sources retained: https://www.samsung.com/us/refrigerators/top-freezer/18-cu-ft-top-freezer-refrigerator-with-ice-maker-in-stainless-steel-sku-rt70f18lasraa. Related-model record: RT70F18LASRAA.
A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
Adjoining-wall clearance (reviewed endpoint)
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
Source documents and pages
18 cu. ft. Top Freezer Refrigerator with Ice Maker in Stainless Steel Silver | Samsung US
Samsung · Web source · Scope not established
Model numbers covered: RT70F18LASRAA. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
7 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.