Measurement evidence for Samsung RT18DG6500SRAA

Value used by ExactFit

28.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — 826196-samsung-rt18dg6500sraa
www.easyrentwichitafalls.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Width = 28.75 in | Samsung Refrigerators RT18DG6500SRAA (Top Fr
Reviewed: 2026-09-04

Plain exact-model specification row: Width = 28.75 in | Samsung Refrigerators RT18DG6500SRAA (Top Freezer ... Specifications / Choose an option ; Width, 28.75 inch(es) / 73.03 cm ; Height (With Hinge), 66.75 inch(es) / 169.55 cm ; Depth (With Handles), 31.87 inch(es) / ...Read mor

Why this value was used

Plain exact-model specification row: Width = 28.75 in | Samsung Refrigerators RT18DG6500SRAA (Top Freezer ... Specifications / Choose an option ; Width, 28.75 inch(es) / 73.03 cm ; Height (With Hinge), 66.75 inch(es) / 169.55 cm ; Depth (With Handles), 31.87 inch(es) / ...Read mor

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 106163521.pdf
groveappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 17
Reviewed: 2026-10-03

Clearance table for RT18*: Height C 65 3/4 in (1669 mm); Overall Height D 66 3/4 in (1697 mm). The stored 66 3/4 is the overall height.

Why this value was used

Clearance table for RT18*: Height C 65 3/4 in (1669 mm); Overall Height D 66 3/4 in (1697 mm). The stored 66 3/4 is the overall height.

Other evidence found

• 66.75 in — superseded

  groveappliance.com; location not retained. Model scope: not separately recorded. Raw value: 1 7/8" | | Net Height with Hinge | 66.75" | | Net Height without Hinge | 66.75" | [...] Standard Features | | | --- | | Surround . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rt18dg6500sraa
groveappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: | | Net Depth with Door Handle | 31 7/8" | | Net Height with Hinge | 66.75" | | Net Height without H
Reviewed: 2026-09-04

| | Net Depth with Door Handle | 31 7/8" | | Net Height with Hinge | 66.75" | | Net Height without Hinge | 66.75" | [...] Sta

Why this value was used

| | Net Depth with Door Handle | 31 7/8" | | Net Height with Hinge | 66.75" | | Net Height without Hinge | 66.75" | [...] Sta

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: matching RT18DG65/67 chassis propagation

Confidence label: medium.

Primary evidence

Samsung measurement source — Samsung RT18DG6700SRAA matching chassis row
www.buyfromsa.com · Web source
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Retained specification excerpt: RT18DG6500 and RT18DG6700 match in every other structural dimension; RT18DG6700 exact listing gives
Reviewed: 2026-09-04

RT18DG6500 and RT18DG6700 match in every other structural dimension; RT18DG6700 exact listing gives Depth Less Door 28.5 in.

Why this value was used

RT18DG6500 and RT18DG6700 match in every other structural dimension; RT18DG6700 exact listing gives Depth Less Door 28.5 in. Calculation or inference: matching RT18DG65/67 chassis propagation.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.875 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rt18dg6500sraa
appliancehomestore.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: reviewed cached consensus: Depth w/o Door Handle = 31.875 in | Handle 31 7/8" Net Height with Hinge
Reviewed: 2026-09-04

reviewed cached consensus: Depth w/o Door Handle = 31.875 in | Handle 31 7/8" Net Height with Hinge 66.75" Net Height without Hinge 66.75" Net Depth w/o Door Handle 31 7/8" Cooling Feature No Frost Yes Garage Ready Yes All Around Cooling Yes Sabbath Mo | supporting domains: appliancehomestore.com, groveappliance.com

Why this value was used

reviewed cached consensus: Depth w/o Door Handle = 31.875 in | Handle 31 7/8" Net Height with Hinge 66.75" Net Height without Hinge 66.75" Net Depth w/o Door Handle 31 7/8" Cooling Feature No Frost Yes Garage Ready Yes All Around Cooling Yes Sabbath Mo | supporting domains: appliancehomestore.com, groveappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

31.875 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — 18-cu-ft-top-freezer-refrigerator-with-all-around-cooling-in-stainless-steel-sku-rt18dg6500sraa
www.easyrentwichitafalls.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model specification prints Net Depth with Door Handle = 31 7/8 in (31.875).
Reviewed: 2026-09-09

Exact-model specification prints Net Depth with Door Handle = 31 7/8 in (31.875).

Why this value was used

Exact-model specification prints Net Depth with Door Handle = 31 7/8 in (31.875).

Other evidence found

• 31.87 in — superseded

  www.easyrentwichitafalls.com; location not retained. Model scope: not separately recorded. Raw value: Depth (With Handles) = 31.87 in | , 28.75 inch(es) / 73.03 cm ; Height (With Hinge), 66.75 inch(es) / 169.55 cm ; Depth (With Handles), 31.87 inch(es) / ...Read more . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

57.875 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: matching RT18DG65/67 chassis propagation

Confidence label: medium.

Primary evidence

Samsung measurement source — Samsung RT18DG6700SRAA matching chassis row
www.buyfromsa.com · Web source
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Retained specification excerpt: RT18DG6500 and RT18DG6700 match in every other structural dimension; RT18DG6700 exact listing gives
Reviewed: 2026-09-04

RT18DG6500 and RT18DG6700 match in every other structural dimension; RT18DG6700 exact listing gives open depth 57 7/8 in.

Why this value was used

RT18DG6500 and RT18DG6700 match in every other structural dimension; RT18DG6700 exact listing gives open depth 57 7/8 in. Calculation or inference: matching RT18DG65/67 chassis propagation.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

30.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 28.75 + 2 * 1 = 30.75

Confidence label: high.

Primary evidence

Samsung measurement source — 106163521.pdf
www.easyrentwichitafalls.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 17
Reviewed: 2026-10-31

Samsung RT18DG6500SRAA installation plan: more than 1 in (25 mm) on both sides. Opening width = 28 3/4 + 1 + 1 = 30 3/4 in. The old 29 1/2 in still used the 3/8 in family figure that the side gap correction replaced.

Why this value was used

Samsung RT18DG6500SRAA installation plan: more than 1 in (25 mm) on both sides. Opening width = 28 3/4 + 1 + 1 = 30 3/4 in. The old 29 1/2 in still used the 3/8 in family figure that the side gap correction replaced. Calculation or inference: 28.75 + 2 * 1 = 30.75.

Other evidence found

• 29.5 in — superseded

  An earlier brand-wide assumption (no document for this model); location not retained. Model scope: not separately recorded. Raw value: Derived minimum opening width 29.5 in from product width 28.75 in and explicit 0.375 in clearance on each side.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

67.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — line_drawings_rt18m6213.pdf
Samsung · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 66.75 in appliance endpoint + 0.375 in clearance = 67.125 in.
Reviewed: 2026-09-05

Samsung installation envelope: 66.75 in appliance endpoint + 0.375 in clearance = 67.125 in.

Why this value was used

Samsung installation envelope: 66.75 in appliance endpoint + 0.375 in clearance = 67.125 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

30.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — 83051771.pdf
assets.skulytics.io · Web source
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Samsung installation envelope: 28.5 in appliance endpoint + 2 in clearance = 30.5 in.

Why this value was used

Samsung installation envelope: 28.5 in appliance endpoint + 2 in clearance = 30.5 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 106163521.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 17
Reviewed: 2026-10-03

Installation plan, callout 03 on both sides: more than 1 in (25 mm) recommended. The stored 3/8 in was a family consensus, not printed for this model.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

Installation plan, callout 03 on both sides: more than 1 in (25 mm) recommended. The stored 3/8 in was a family consensus, not printed for this model.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 106163521.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 17
Reviewed: 2026-10-03

Installation plan, callout 03 on both sides: more than 1 in (25 mm) recommended. The stored 3/8 in was a family consensus, not printed for this model.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

Installation plan, callout 03 on both sides: more than 1 in (25 mm) recommended. The stored 3/8 in was a family consensus, not printed for this model.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — line_drawings_rt18m6213.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cached exact-model result: Allow a 3/8" minimum clearance at sides and top
Reviewed: 2026-09-05

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Why this value was used

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: shared Samsung model family; evidence donor RT16A6195SR

Confidence label: medium.

Primary evidence

Samsung measurement source — 83051771.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Samsung documented sibling/platform propagation from RT16A6195SR: 2" minimum clearance at rear

Why this value was used

Samsung documented sibling/platform propagation from RT16A6195SR: 2" minimum clearance at rear Calculation or inference: shared Samsung model family; evidence donor RT16A6195SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.5 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

Samsung measurement source — line_drawings_rt18m6213.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). Cached exact-model
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). Cached exact-model result: Allow 2.5" of clearance on hinge side

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). Cached exact-model result: Allow 2.5" of clearance on hinge side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28.75 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in = width_doors_closed_in

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

Samsung measurement source — 826196-samsung-rt18dg6500sraa
www.easyrentwichitafalls.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same-appliance endpoint inference: case width equals exact stored closed width 28.75 in; manufacture
Reviewed: 2026-09-09

Same-appliance endpoint inference: case width equals exact stored closed width 28.75 in; manufacturer does not label a separate case-width endpoint.

Why this value was used

Same-appliance endpoint inference: case width equals exact stored closed width 28.75 in; manufacturer does not label a separate case-width endpoint. Calculation or inference: case_width_in = width_doors_closed_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.