Measurement evidence for Samsung RS28CB7600QLAA

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Samsung RS28CB7600QLAA fit check Check this model against your opening How ExactFit verifies measurements

Samsung RS28CB7600QLAA

Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Complete mixed evidence

13exact-model manufacturer values

0verified equivalent/same-chassis values

3secondary-source-only values

0values with unresolved source details

Last reviewed: 2026-09-05. 5 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	35.875 in	✓ Conflicting sources — resolved	WillitFit_RS28CB7600.indd - Samsung Samsung	Retained specification excerpt: WIDTH (FITS 36" OPENING): 35 7/8".
Value used by ExactFit 35.875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: WIDTH (FITS 36" OPENING): 35 7/8". Reviewed: 2026-09-04 WIDTH (FITS 36" OPENING): 35 7/8". Open original source ↗ Why this value was used WIDTH (FITS 36" OPENING): 35 7/8". Other evidence found 35.87 in — superseded https://www.easyrentwichitafalls.com/en/product/770310-samsung-rs28cb7600qlaa; location not retained. Model scope: not separately recorded. Raw value: Reviewed exact-model cached label: Width = 35.87 in. Context: amsung Refrigerators RS28CB7600QLAA (Side-by-Side ... Specifications / Choose an option ; Width, 35.87 inch(es) / 91.12 cm ; Height (With Hinge), 70.62 inch(es) / 179.38 cm ; Overall Depth, 33.75 inch(es) / 85.73 cm. . The final reviewed registry supersedes this earlier audit value. WIDTH (FITS 36" OPENING): 35 7/8". Open alternative source ↗ Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	68.625 in	✓ Secondary source only	Samsung RS28CB7600QLAA Bespoke Side-By- ... www.abt.com	Retained specification excerpt: Exact-model table: Case Height = 68.63 in (68 5/8 nominal).
Value used by ExactFit 68.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Samsung RS28CB7600QLAA Bespoke Side-By- ... www.abt.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Exact-model table: Case Height = 68.63 in (68 5/8 nominal). Reviewed: 2026-09-04 Exact-model table: Case Height = 68.63 in (68 5/8 nominal). Open original source ↗ Why this value was used Exact-model table: Case Height = 68.63 in (68 5/8 nominal). Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	70.625 in	✓ Conflicting sources — resolved	WillitFit_RS28CB7600.indd - Samsung Samsung	Retained specification excerpt: HEIGHT WITH HINGE: 70 5/8".
Value used by ExactFit 70.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: HEIGHT WITH HINGE: 70 5/8". Reviewed: 2026-09-04 HEIGHT WITH HINGE: 70 5/8". Open original source ↗ Why this value was used HEIGHT WITH HINGE: 70 5/8". Other evidence found 70.62 in — superseded https://www.easyrentwichitafalls.com/en/product/770310-samsung-rs28cb7600qlaa; location not retained. Model scope: not separately recorded. Raw value: Reviewed exact-model cached label: Height = 70.62 in. Context: (Side-by-Side ... Specifications / Choose an option ; Width, 35.87 inch(es) / 91.12 cm ; Height (With Hinge), 70.62 inch(es) / 179.38 cm ; Overall Depth, 33.75 inch(es) / 85.73 cm. . The final reviewed registry supersedes this earlier audit value. HEIGHT WITH HINGE: 70 5/8". Open alternative source ↗ Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	28.875 in	✓ Verified — exact model	WillitFit_RS28CB7600.indd - Samsung Samsung	Retained specification excerpt: DEPTH WITHOUT DOOR: 28 7/8".
Value used by ExactFit 28.875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: DEPTH WITHOUT DOOR: 28 7/8". Reviewed: 2026-09-04 DEPTH WITHOUT DOOR: 28 7/8". Open original source ↗ Why this value was used DEPTH WITHOUT DOOR: 28 7/8". Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	33.75 in	✓ Verified — exact model · Calculated/inferred	WillitFit_RS28CB7600.indd - Samsung Samsung	Retained specification excerpt: DEPTH WITH RECESSED HANDLE: 33 3/4".
Value used by ExactFit 33.75 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: Recessed-handle depth is the handleless closed depth. Confidence label: medium. Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: DEPTH WITH RECESSED HANDLE: 33 3/4". Reviewed: 2026-09-04 DEPTH WITH RECESSED HANDLE: 33 3/4". Open original source ↗ Why this value was used DEPTH WITH RECESSED HANDLE: 33 3/4". Calculation or inference: Recessed-handle depth is the handleless closed depth.. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	33.75 in	✓ Secondary source only	RS28CB7600QLAA Samsung Refrigerators www.cameronfurnitureandappliance.com	Retained specification excerpt: 35.87 inch(es) Height (With Hinge) 70.62 inch(es) Overall Depth 33.75 inch(es) Weight 262.
Value used by ExactFit 33.75 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence RS28CB7600QLAA Samsung Refrigerators www.cameronfurnitureandappliance.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: 35.87 inch(es) Height (With Hinge) 70.62 inch(es) Overall Depth 33.75 inch(es) Weight 262. Reviewed: 2026-09-04 35.87 inch(es) Height (With Hinge) 70.62 inch(es) Overall Depth 33.75 inch(es) Weight 262. Open original source ↗ Why this value was used 35.87 inch(es) Height (With Hinge) 70.62 inch(es) Overall Depth 33.75 inch(es) Weight 262. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	51.375 in	✓ Verified — exact model	WillitFit_RS28CB7600.indd - Samsung Samsung	Retained specification excerpt: DEPTH WITH DOOR OPEN 90 degrees: 51 3/8".
Value used by ExactFit 51.375 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: DEPTH WITH DOOR OPEN 90 degrees: 51 3/8". Reviewed: 2026-09-04 DEPTH WITH DOOR OPEN 90 degrees: 51 3/8". Open original source ↗ Why this value was used DEPTH WITH DOOR OPEN 90 degrees: 51 3/8". Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	36 in	✓ Conflicting sources — resolved	WillitFit_RS28CB7600.indd - Samsung Samsung	Retained specification excerpt: WIDTH (FITS 36" OPENING): 35 7/8".
Value used by ExactFit 36 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: WIDTH (FITS 36" OPENING): 35 7/8". Reviewed: 2026-09-04 WIDTH (FITS 36" OPENING): 35 7/8". Open original source ↗ Why this value was used WIDTH (FITS 36" OPENING): 35 7/8". Other evidence found 36.62 in — superseded https://www.easyrentwichitafalls.com/en/product/770310-samsung-rs28cb7600qlaa + https://image-us.samsung.com/SamsungUS/home/home-appliances/refrigerators/bespoke/rs28cb7600qlaa/WillitFit_RS28CB7600.pdf; location not retained. Model scope: not separately recorded. Raw value: Derived minimum opening width 36.62 in from product width 35.87 in and explicit 0.375 in clearance on each side.. The final reviewed registry supersedes this earlier audit value. WIDTH (FITS 36" OPENING): 35 7/8". Open alternative source ↗ Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	71 in	✓ Secondary source only · Calculated/inferred	WillitFit_RS28CB7600.indd - Samsung Samsung	Page 1
Value used by ExactFit 71 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05 Minimum opening height derived from highest appliance endpoint 70.625 in plus documented top clearance 0.375 in. Open original source ↗ Why this value was used Minimum opening height derived from highest appliance endpoint 70.625 in plus documented top clearance 0.375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	30.875 in	✓ Verified — exact model · Calculated/inferred	WillitFit_RS28CB7600.indd - Samsung Samsung	Page 1
Value used by ExactFit 30.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05 Minimum opening depth derived from case-only depth 28.875 in plus documented rear clearance 2.0 in. Open original source ↗ Why this value was used Minimum opening depth derived from case-only depth 28.875 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	0.375 in	✓ Verified — exact model	WillitFit_RS28CB7600.indd - Samsung Samsung	Page 1
Value used by ExactFit 0.375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05 circulation and water/electrical connections. \| 3Allow a 3/8" minimum clearance at sides and top \| for ease of installation. \| deterministic pattern: minimum_sides Open original source ↗ Why this value was used circulation and water/electrical connections. \| 3Allow a 3/8" minimum clearance at sides and top \| for ease of installation. \| deterministic pattern: minimum_sides Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	0.375 in	✓ Verified — exact model	WillitFit_RS28CB7600.indd - Samsung Samsung	Page 1
Value used by ExactFit 0.375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05 circulation and water/electrical connections. \| 3Allow a 3/8" minimum clearance at sides and top \| for ease of installation. \| deterministic pattern: minimum_sides Open original source ↗ Why this value was used circulation and water/electrical connections. \| 3Allow a 3/8" minimum clearance at sides and top \| for ease of installation. \| deterministic pattern: minimum_sides Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	0.375 in	✓ Verified — exact model	WillitFit_RS28CB7600.indd - Samsung Samsung	Page 1
Value used by ExactFit 0.375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: top_clearance_in = reviewed side clearance because source explicitly states sides and top Confidence label: medium. Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05 Stored reviewed evidence explicitly applies the same clearance to sides and top. circulation and water/electrical connections. \| 3Allow a 3/8" minimum clearance at sides and top \| for ease of installation. \| deterministic pattern: minimum_sides Open original source ↗ Why this value was used Stored reviewed evidence explicitly applies the same clearance to sides and top. circulation and water/electrical connections. \| 3Allow a 3/8" minimum clearance at sides and top \| for ease of installation. \| deterministic pattern: minimum_sides Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	2 in	✓ Verified — exact model	WillitFit_RS28CB7600.indd - Samsung Samsung	Page 1
Value used by ExactFit 2 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: full-page semantic adjudication of parser alternatives Confidence label: high. Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05 2" minimum clearance at rear Open original source ↗ Why this value was used 2" minimum clearance at rear Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	2.5 in	✓ Verified — exact model	2023_RS28CB7600_V8 - Samsung Samsung	Page 2
Value used by ExactFit 2.5 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence 2023_RS28CB7600_V8 - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 2. Refer to illustration below to determine dimensions. \| 3. Allow 2.5" of clearance on hinge side of refrigerator when installing next to a wall \| where handle may make contact. Open original source ↗ Why this value was used 2. Refer to illustration below to determine dimensions. \| 3. Allow 2.5" of clearance on hinge side of refrigerator when installing next to a wall \| where handle may make contact. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	35.875 in	✓ Conflicting sources — resolved	WillitFit_RS28CB7600.indd - Samsung Samsung	Retained specification excerpt: WIDTH (FITS 36" OPENING): 35 7/8".
Value used by ExactFit 35.875 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: WIDTH (FITS 36" OPENING): 35 7/8". Reviewed: 2026-09-04 WIDTH (FITS 36" OPENING): 35 7/8". Open original source ↗ Why this value was used WIDTH (FITS 36" OPENING): 35 7/8". Other evidence found 35.87 in — superseded https://www.easyrentwichitafalls.com/en/product/770310-samsung-rs28cb7600qlaa; location not retained. Model scope: not separately recorded. Raw value: Low-confidence same-appliance width mapping: case_width_in=35.87 in from width_doors_closed_in.. The final reviewed registry supersedes this earlier audit value. WIDTH (FITS 36" OPENING): 35 7/8". Open alternative source ↗ Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	0.375 in	✓ Verified — exact model	WillitFit_RS28CB7600.indd - Samsung Samsung	Page 1
Value used by ExactFit 0.375 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence WillitFit_RS28CB7600.indd - Samsung Samsung · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 circulation and water/electrical connections. \| 3Allow a 3/8" minimum clearance at sides and top \| for ease of installation. \| deterministic pattern: minimum_sides Open original source ↗ Why this value was used circulation and water/electrical connections. \| 3Allow a 3/8" minimum clearance at sides and top \| for ease of installation. \| deterministic pattern: minimum_sides Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Overall width

Selected: 35.875 in. Earlier retained values: 35.87 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

WIDTH (FITS 36" OPENING): 35 7/8".

View source scope, location, and impact on fit

Height with hinge / controlling height

Selected: 70.625 in. Earlier retained values: 70.62 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

HEIGHT WITH HINGE: 70 5/8".

View source scope, location, and impact on fit

Minimum cutout width

Selected: 36 in. Earlier retained values: 36.62 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

WIDTH (FITS 36" OPENING): 35 7/8".

View source scope, location, and impact on fit

Cabinet case width

Selected: 35.875 in. Earlier retained values: 35.87 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

WIDTH (FITS 36" OPENING): 35 7/8".

View source scope, location, and impact on fit

Source documents and pages

WillitFit_RS28CB7600.indd - Samsung

Samsung · Web source · exact model/source

Model numbers covered: RS28CB7600QLAA. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

12 displayed measurements supported: Overall width; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with doors open at 90°; Minimum cutout width; Minimum cutout height; Left-side ventilation clearance; Right-side ventilation clearance; Top clearance; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).