Measurement evidence for Samsung RS28A500ASRAA

Value used by ExactFit

35.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 28-cu-ft-smart-side-by-side-refrigerator-in-stainless-steel-sku-rs28a500asr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed exact-model cached label: Width = 35.875 in. Context: 9?$ORIGIN_JPG$) ![Width](https://imag
Reviewed: 2026-09-04

Reviewed exact-model cached label: Width = 35.875 in. Context: 9?$ORIGIN_JPG$)  Width 35.875 Inches  Height 70.0625 Inches ![Depth](h

Why this value was used

Reviewed exact-model cached label: Width = 35.875 in. Context: 9?$ORIGIN_JPG$)  Width 35.875 Inches  Height 70.0625 Inches ![Depth](h

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.62 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 28-cu-ft-smart-side-by-side-refrigerator-in-stainless-steel-sku-rs28a500asr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height without Hinge: 68.62 in | and Door 35 7/8" W x 70 1/16" H x 33 1/2" D Net Height with Hinge
Reviewed: 2026-09-04

Height without Hinge: 68.62 in | and Door 35 7/8" W x 70 1/16" H x 33 1/2" D Net Height with Hinge 70 1/16" Net Height without Hinge 68 5/8" Net Depth w/o Door Handle 33 1/2" Depth without Door (in) 28 15/16" Height (dec

Why this value was used

Height without Hinge: 68.62 in | and Door 35 7/8" W x 70 1/16" H x 33 1/2" D Net Height with Hinge 70 1/16" Net Height without Hinge 68 5/8" Net Depth w/o Door Handle 33 1/2" Depth without Door (in) 28 15/16" Height (dec

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.0625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — SamsungSpecs_980320686.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Corrected prior value 73 in (2 344 Height to Top of Door (in.) 73" 73" 73" 73" Height to Top of Hing
Reviewed: 2026-09-04

Corrected prior value 73 in (2 344 Height to Top of Door (in.) 73" 73" 73" 73" Height to Top of Hinge (in.) 73" 73" 73" 73" Height to Top of Case (in.) 70-3/4" 7). Exact-model manufacturer sheet: product height with hinges 70 1/16 in; replaces a shipping/cutout height.

Why this value was used

Corrected prior value 73 in (2 344 Height to Top of Door (in.) 73" 73" 73" 73" Height to Top of Hinge (in.) 73" 73" 73" 73" Height to Top of Case (in.) 70-3/4" 7). Exact-model manufacturer sheet: product height with hinges 70 1/16 in; replaces a shipping/cutout height.

Other evidence found

• 73 in — superseded

  image-us.samsung.com; location not retained. Model scope: not separately recorded. Raw value: 2 344 Height to Top of Door (in.) 73" 73" 73" 73" Height to Top of Hinge (in.) 73" 73" 73" 73" Height to Top of Case (in.) 70-3/4" 7. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.9375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — SamsungSpecs_980320686.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Corrected prior value 25 in (Top of Case (in.) 68-7/8" 68-7/8" 68-7/8" 68-7/8" Case Depth without Do
Reviewed: 2026-09-04

Corrected prior value 25 in (Top of Case (in.) 68-7/8" 68-7/8" 68-7/8" 68-7/8" Case Depth without Door (in.) 25" 29-1/2" 25" 29-3/4" Case Depth less Door Handle (). Exact-model manufacturer sheet: product depth without door 28 15/16 in; replaces a 25-inch cutout depth.

Why this value was used

Corrected prior value 25 in (Top of Case (in.) 68-7/8" 68-7/8" 68-7/8" 68-7/8" Case Depth without Door (in.) 25" 29-1/2" 25" 29-3/4" Case Depth less Door Handle (). Exact-model manufacturer sheet: product depth without door 28 15/16 in; replaces a 25-inch cutout depth.

Other evidence found

• 25 in — superseded

  image-us.samsung.com; location not retained. Model scope: not separately recorded. Raw value: Top of Case (in.) 68-7/8" 68-7/8" 68-7/8" 68-7/8" Case Depth without Door (in.) 25" 29-1/2" 25" 29-3/4" Case Depth less Door Handle (. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 28-cu-ft-smart-side-by-side-refrigerator-in-stainless-steel-sku-rs28a500asr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth w/o Door Handle: 33.5 in | x 33 1/2" D Net Height with Hinge 70 1/16" Net Height without Hinge
Reviewed: 2026-09-04

Depth w/o Door Handle: 33.5 in | x 33 1/2" D Net Height with Hinge 70 1/16" Net Height without Hinge 68 5/8" Net Depth w/o Door Handle 33 1/2" Depth without Door (in) 28 15/16" Height (decimal) 70.0625 Width (decimal) 35.8

Why this value was used

Depth w/o Door Handle: 33.5 in | x 33 1/2" D Net Height with Hinge 70 1/16" Net Height without Hinge 68 5/8" Net Depth w/o Door Handle 33 1/2" Depth without Door (in) 28 15/16" Height (decimal) 70.0625 Width (decimal) 35.8

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 28-cu-ft-smart-side-by-side-refrigerator-in-stainless-steel-sku-rs28a500asr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed exact-model cached label: Depth = 33.5 in. Context: 70.0625 Inches ![Depth](https://image-
Reviewed: 2026-09-04

Reviewed exact-model cached label: Depth = 33.5 in. Context: 70.0625 Inches  Depth 33.5 Inches Make sure it fits Measure your space to assure it will fit upon delivery. and the pathway for a seamless de

Why this value was used

Reviewed exact-model cached label: Depth = 33.5 in. Context: 70.0625 Inches  Depth 33.5 Inches Make sure it fits Measure your space to assure it will fit upon delivery. and the pathway for a seamless de

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

51.3125 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: seven-dimension conflict-free side-by-side chassis propagation

Confidence label: medium.

Primary evidence

Samsung measurement source — Samsung RS27T5200 matching side-by-side chassis
images.thdstatic.com · Web source
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Retained specification excerpt: After exact corrections, RS28A500 matches the RS27T5200 side-by-side chassis in seven structural fie
Reviewed: 2026-09-04

After exact corrections, RS28A500 matches the RS27T5200 side-by-side chassis in seven structural fields; manufacturer open depth is 51 5/16 in.

Why this value was used

After exact corrections, RS28A500 matches the RS27T5200 side-by-side chassis in seven structural fields; manufacturer open depth is 51 5/16 in. Calculation or inference: seven-dimension conflict-free side-by-side chassis propagation.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 35.875 + 2 * 0.375 = 36.625

Confidence label: medium.

Primary evidence

Samsung measurement source — 28-cu-ft-smart-side-by-side-refrigerator-in-stainless-steel-sku-rs28a500asr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: 35.875 in width plus documented 0.375 in clearance on each side.
Reviewed: 2026-09-04

35.875 in width plus documented 0.375 in clearance on each side.

Why this value was used

35.875 in width plus documented 0.375 in clearance on each side. Calculation or inference: 35.875 + 2 * 0.375 = 36.625.

Other evidence found

• 30.75 in — superseded

  An earlier brand-wide assumption (no document for this model); location not retained. Model scope: not separately recorded. Raw value: Derived minimum opening width 30.75 in from product width 30.0 in and explicit 0.375 in clearance on each side.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.4375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — SamsungSpecs_980320686.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 70.0625 in appliance endpoint + 0.375 in clearance = 70.4375 in.
Reviewed: 2026-09-05

Samsung installation envelope: 70.0625 in appliance endpoint + 0.375 in clearance = 70.4375 in.

Why this value was used

Samsung installation envelope: 70.0625 in appliance endpoint + 0.375 in clearance = 70.4375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.9375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — SamsungSpecs_980265120.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 28.9375 in appliance endpoint + 1 in clearance = 29.9375 in.
Reviewed: 2026-09-05

Samsung installation envelope: 28.9375 in appliance endpoint + 1 in clearance = 29.9375 in.

Why this value was used

Samsung installation envelope: 28.9375 in appliance endpoint + 1 in clearance = 29.9375 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — SamsungSpecs_980320686.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — SamsungSpecs_980320686.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — SamsungSpecs_980320686.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cached exact-model result: Allow a 3/8" minimum clearance at sides and top
Reviewed: 2026-09-05

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Why this value was used

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: shared Samsung model family; evidence donor RS22T5561SRAA

Confidence label: medium.

Primary evidence

Samsung measurement source — SamsungSpecs_980265120.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung documented sibling/platform propagation from RS22T5561SRAA: Cached exact-model result: Allow
Reviewed: 2026-09-05

Samsung documented sibling/platform propagation from RS22T5561SRAA: Cached exact-model result: Allow 1" minimum clearance at rear

Why this value was used

Samsung documented sibling/platform propagation from RS22T5561SRAA: Cached exact-model result: Allow 1" minimum clearance at rear Calculation or inference: shared Samsung model family; evidence donor RS22T5561SRAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.5 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — RS28A500ASR_V5.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-25

Samsung specification sheet RS28A500ASR_V5.pdf: "Allow 2.5" of clearance on hinge side of refrigerator when installing next to a wall where handle may make contact." Door angle not stated.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

Samsung specification sheet RS28A500ASR_V5.pdf: "Allow 2.5" of clearance on hinge side of refrigerator when installing next to a wall where handle may make contact." Door angle not stated.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.875 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — SamsungSpecs_980320686.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Corrected prior value 30 in (.8 308.6 Net Weight (lbs.) 222.7 270.1 278.9 Oven Cabinet Width Require
Reviewed: 2026-09-04

Corrected prior value 30 in (.8 308.6 Net Weight (lbs.) 222.7 270.1 278.9 Oven Cabinet Width Required (in.) 30" 30" 30" Overall Dimensions, Including Handle (W x). Exact-model manufacturer sheet: width without hinges and door 35 7/8 in; replaces an unrelated 30-inch value.

Why this value was used

Corrected prior value 30 in (.8 308.6 Net Weight (lbs.) 222.7 270.1 278.9 Oven Cabinet Width Required (in.) 30" 30" 30" Overall Dimensions, Including Handle (W x). Exact-model manufacturer sheet: width without hinges and door 35 7/8 in; replaces an unrelated 30-inch value.

Other evidence found

• 30 in — superseded

  image-us.samsung.com; location not retained. Model scope: not separately recorded. Raw value: .8 308.6 Net Weight (lbs.) 222.7 270.1 278.9 Oven Cabinet Width Required (in.) 30" 30" 30" Overall Dimensions, Including Handle (W x. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.