Measurement evidence for Samsung RS27T5200SR/AA

Value used by ExactFit

35.90625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — samsung-rs27t5200sr-aa.json
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 16
Reviewed: 2026-09-09

Width B: 35 29/32 in (912 mm)

Why this value was used

Width B: 35 29/32 in (912 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.65625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — samsung-rs27t5200sr-aa.json
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 16
Reviewed: 2026-09-09

Height C: 68 21/32 in (1744 mm)

Why this value was used

Height C: 68 21/32 in (1744 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.0625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — RS27T5200SR-dimension-guide-thd-mirror.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Height with hinge: 70 1/16 in

Why this value was used

Height with hinge: 70 1/16 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.9375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — samsung-rs27t5200sr-aa.json
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Dimensions without hinges and door: 35 7/8 x 68 5/8 x 28 15/16 in

Why this value was used

Dimensions without hinges and door: 35 7/8 x 68 5/8 x 28 15/16 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — samsung-rs27t5200sr-aa.json
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Dimensions with hinge and door, no handle: 35 7/8 x 70 1/16 x 33 1/2 in

Why this value was used

Dimensions with hinge and door, no handle: 35 7/8 x 70 1/16 x 33 1/2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — samsung-rs27t5200sr-aa.json
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 16
Reviewed: 2026-09-09

Depth A: 33 1/2 in (851 mm)

Why this value was used

Depth A: 33 1/2 in (851 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

51.3125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — RS27T5200SR-dimension-guide-thd-mirror.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth with door open 90 degrees: 51 5/16 in

Why this value was used

Depth with door open 90 degrees: 51 5/16 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — RS27T5200SR-dimension-guide-thd-mirror.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Samsung fit guide: WIDTH (FITS 36" OPENING)

Why this value was used

Samsung fit guide: WIDTH (FITS 36" OPENING)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.4375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 70.0625 + top_clearance_in

Confidence label: high.

Calculation inputs: Top clearance;

Primary evidence

Samsung measurement source — RS27T5200SR-dimension-guide-thd-mirror.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

{"calculation": "70.0625 + top_clearance_in", "operands": {"top_clearance_in": [{"cache_path": "data/truth-set/samsung-rs27t5200sr-aa.json", "page": 2, "raw": "Allow a 3/8 in minimum clearance at sides and top for ease of installation", "source_url": "https://image-us.samsung.com/SamsungUS/home/home-appliances/refrigerators/side-by-side/pdp/rs27t5200sg-aa/gallery/RS27T5200SR_V7.pdf", "value_in": 0.375}]}, "result_in": 70.4375}

Why this value was used

{"calculation": "70.0625 + top_clearance_in", "operands": {"top_clearance_in": [{"cache_path": "data/truth-set/samsung-rs27t5200sr-aa.json", "page": 2, "raw": "Allow a 3/8 in minimum clearance at sides and top for ease of installation", "source_url": "https://image-us.samsung.com/SamsungUS/home/home-appliances/refrigerators/side-by-side/pdp/rs27t5200sg-aa/gallery/RS27T5200SR_V7.pdf", "value_in": 0.375}]}, "result_in": 70.4375} Calculation or inference: 70.0625 + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.9375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — samsung-rs27t5200sr-aa.json
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "data/truth-set/samsung-rs27t5200sr-aa.json", "page": 2, "raw": "Dimensions without hinges and door: 35 7/8 x 68 5/8 x 28 15/16 in", "source_url": "https://image-us.samsung.com/SamsungUS/home/home-appliances/refrigerators/side-by-side/pdp/rs27t5200sg-aa/gallery/RS27T5200SR_V7.pdf", "value_in": 28.9375}], "rear_clearance_in": [{"cache_path": "73605321124b53bcb1e31aaadb969cb10ae666fd070cb6785bd8b32a09a61cc7.pdf", "page": 2, "raw": "Minimum clearance at rear: 1\"", "source_url": "https://image-us.samsung.com/SamsungUS/home/home-appliances/refrigerators/side-by-side/pdp/rs27t5200sg-aa/gallery/RS27T5200SR_V7.pdf", "value_in": 1.0}]}, "result_in": 29.9375}

Why this value was used

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "data/truth-set/samsung-rs27t5200sr-aa.json", "page": 2, "raw": "Dimensions without hinges and door: 35 7/8 x 68 5/8 x 28 15/16 in", "source_url": "https://image-us.samsung.com/SamsungUS/home/home-appliances/refrigerators/side-by-side/pdp/rs27t5200sg-aa/gallery/RS27T5200SR_V7.pdf", "value_in": 28.9375}], "rear_clearance_in": [{"cache_path": "73605321124b53bcb1e31aaadb969cb10ae666fd070cb6785bd8b32a09a61cc7.pdf", "page": 2, "raw": "Minimum clearance at rear: 1\"", "source_url": "https://image-us.samsung.com/SamsungUS/home/home-appliances/refrigerators/side-by-side/pdp/rs27t5200sg-aa/gallery/RS27T5200SR_V7.pdf", "value_in": 1.0}]}, "result_in": 29.9375} Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — samsung-rs27t5200sr-aa.json
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Allow a 3/8 in minimum clearance at sides and top for ease of installation

Why this value was used

Allow a 3/8 in minimum clearance at sides and top for ease of installation

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — samsung-rs27t5200sr-aa.json
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Allow a 3/8 in minimum clearance at sides and top for ease of installation

Why this value was used

Allow a 3/8 in minimum clearance at sides and top for ease of installation

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — samsung-rs27t5200sr-aa.json
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Allow a 3/8 in minimum clearance at sides and top for ease of installation

Why this value was used

Allow a 3/8 in minimum clearance at sides and top for ease of installation

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 73605321124b53bcb1e31aaadb969cb10ae666fd070cb6785bd8b32a09a61cc7.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Minimum clearance at rear: 1"

Why this value was used

Minimum clearance at rear: 1"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

Samsung measurement source — RS27T5200SR-dimension-guide-thd-mirror.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (90 degrees). Allow 3.75 in of clearance when installing along a wall so the door opens 90 degrees without handle contact

Why this value was used

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (90 degrees). Allow 3.75 in of clearance when installing along a wall so the door opens 90 degrees without handle contact

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.90625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — samsung-rs27t5200sr-aa.json
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 16
Reviewed: 2026-09-09

Width B: 35 29/32 in (912 mm)

Why this value was used

Width B: 35 29/32 in (912 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.