Measurement evidence for Samsung RS27T5200SGAA

Value used by ExactFit

35.88 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung RS27T5200SGAA Side-by-Side Refrigerators | Ohio | Grove
groveappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Width = 35.88 in | Samsung RS27T5200SGAA Side-by-Side Refrigera
Reviewed: 2026-09-04

Plain exact-model specification row: Width = 35.88 in | Samsung RS27T5200SGAA Side-by-Side Refrigerators | Ohio | Grove | | | --- | | Width | 35.88 in. | | Height | 70.06 in. | | Length | Weight | 289 lbs. | | Shipping Weight | 298 lbs | | Shipping Weight (lbs.) | 298 lb

Why this value was used

Plain exact-model specification row: Width = 35.88 in | Samsung RS27T5200SGAA Side-by-Side Refrigerators | Ohio | Grove | | | --- | | Width | 35.88 in. | | Height | 70.06 in. | | Length | Weight | 289 lbs. | | Shipping Weight | 298 lbs | | Shipping Weight (lbs.) | 298 lb

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung RS27T5200SGAA Side-by-Side Refrigerators
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height without Hinge = 68.625 in | t Depth with Door Handle | 33 1/2" | | Net Height with Hinge | 70
Reviewed: 2026-09-04

Height without Hinge = 68.625 in | t Depth with Door Handle | 33 1/2" | | Net Height with Hinge | 70 1/16" | | Net Height without Hinge | 68 5/8" | | Depth without Door (in) | 28 15/16" | | Product Dimensions with Hinges, Han | independent cached support: appliancehomestore.com, groveappliance.com

Why this value was used

Height without Hinge = 68.625 in | t Depth with Door Handle | 33 1/2" | | Net Height with Hinge | 70 1/16" | | Net Height without Hinge | 68 5/8" | | Depth without Door (in) | 28 15/16" | | Product Dimensions with Hinges, Han | independent cached support: appliancehomestore.com, groveappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.0625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung RS27T5200SGAA Side-by-Side Refrigerators
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height with Hinge = 70.0625 in | ipping Weight (lbs.) | 298 lbs | | Net Depth with Door Handle | 33
Reviewed: 2026-09-04

Height with Hinge = 70.0625 in | ipping Weight (lbs.) | 298 lbs | | Net Depth with Door Handle | 33 1/2" | | Net Height with Hinge | 70 1/16" | | Net Height without Hinge | 68 5/8" | | Depth without Door (in) | 28 15/16" | independent cached support: appliancehomestore.com, groveappliance.com

Why this value was used

Height with Hinge = 70.0625 in | ipping Weight (lbs.) | 298 lbs | | Net Depth with Door Handle | 33 1/2" | | Net Height with Hinge | 70 1/16" | | Net Height without Hinge | 68 5/8" | | Depth without Door (in) | 28 15/16" | independent cached support: appliancehomestore.com, groveappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.9375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung RS27T5200SGAA Side-by-Side Refrigerators
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without Door = 28.9375 in | | | Net Height with Hinge | 70 1/16" | | Net Height without Hinge
Reviewed: 2026-09-04

Depth without Door = 28.9375 in | | | Net Height with Hinge | 70 1/16" | | Net Height without Hinge | 68 5/8" | | Depth without Door (in) | 28 15/16" | | Product Dimensions with Hinges, Handles and Door | 35 7/8" x 70 1/16" x 33 | cached support: appliancehomestore.com, groveappliance.com

Why this value was used

Depth without Door = 28.9375 in | | | Net Height with Hinge | 70 1/16" | | Net Height without Hinge | 68 5/8" | | Depth without Door (in) | 28 15/16" | | Product Dimensions with Hinges, Handles and Door | 35 7/8" x 70 1/16" x 33 | cached support: appliancehomestore.com, groveappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung RS27T5200SGAA Side-by-Side Refrigerators
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth w/o Door Handle = 33.5 in | Net Height with Hinge | 70 1/16" | | Net Height without Hinge | 68
Reviewed: 2026-09-04

Depth w/o Door Handle = 33.5 in | Net Height with Hinge | 70 1/16" | | Net Height without Hinge | 68 5/8" | | Net Depth w/o Door Handle | 33 1/2" | | Depth without Door (in) | 28 15/16" | | Width (decimal) | 35.875 | | Depth | cached support: appliancehomestore.com, groveappliance.com

Why this value was used

Depth w/o Door Handle = 33.5 in | Net Height with Hinge | 70 1/16" | | Net Height without Hinge | 68 5/8" | | Net Depth w/o Door Handle | 33 1/2" | | Depth without Door (in) | 28 15/16" | | Width (decimal) | 35.875 | | Depth | cached support: appliancehomestore.com, groveappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung RS27T5200SGAA Side-by-Side Refrigerators
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with Door Handle = 33.5 in | lbs. | | Shipping Weight | 298 lbs | | Shipping Weight (lbs.) | 2
Reviewed: 2026-09-04

Depth with Door Handle = 33.5 in | lbs. | | Shipping Weight | 298 lbs | | Shipping Weight (lbs.) | 298 lbs | | Net Depth with Door Handle | 33 1/2" | | Net Height with Hinge | 70 1/16" | | Net Height without Hinge | 68 5/8" | | | cached support: appliancehomestore.com, groveappliance.com

Why this value was used

Depth with Door Handle = 33.5 in | lbs. | | Shipping Weight | 298 lbs | | Shipping Weight (lbs.) | 298 lbs | | Net Depth with Door Handle | 33 1/2" | | Net Height with Hinge | 70 1/16" | | Net Height without Hinge | 68 5/8" | | | cached support: appliancehomestore.com, groveappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

51.3125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

27 cu. ft. Side-by-Side
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model manufacturer sheet: Depth with door open 90 degrees 51 5/16 in; retailer reports 51.34 i
Reviewed: 2026-09-04

Exact-model manufacturer sheet: Depth with door open 90 degrees 51 5/16 in; retailer reports 51.34 in.

Why this value was used

Exact-model manufacturer sheet: Depth with door open 90 degrees 51 5/16 in; retailer reports 51.34 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.88 + 2 * 0.375

Confidence label: medium.

Primary evidence

Samsung measurement source — https://groveappliance.com/refrigeration/refrigerators/side-by-side-refrigerators/rs27t5200sgaa + local-cache manufacturer-family consensus
groveappliance.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.63 in from product width 35.88 in and explicit 0.375 in clearance o
Reviewed: 2026-09-04

Derived minimum opening width 36.63 in from product width 35.88 in and explicit 0.375 in clearance on each side.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 36.63 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.4375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

27 cu. ft. Side-by-Side MODEL RS27T5200 DIMENSIONS
Samsung · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 70.0625 in appliance endpoint + 0.375 in clearance = 70.4375 in.
Reviewed: 2026-09-05

Samsung installation envelope: 70.0625 in appliance endpoint + 0.375 in clearance = 70.4375 in.

Why this value was used

Samsung installation envelope: 70.0625 in appliance endpoint + 0.375 in clearance = 70.4375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

[PDF] RS22T5561SR
s7d2.scene7.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 28.9375 in appliance endpoint + 1 in clearance = 29.9375 in.
Reviewed: 2026-09-05

Samsung installation envelope: 28.9375 in appliance endpoint + 1 in clearance = 29.9375 in.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 29.9375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pa
Reviewed: 2026-09-05

Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pa
Reviewed: 2026-09-05

Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

27 cu. ft. Side-by-Side MODEL RS27T5200 DIMENSIONS
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cached exact-model result: Allow a 3/8" minimum clearance at sides and top [cache: C:\Source Code\wi
Reviewed: 2026-09-05

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top [cache: C:\Source Code\windsurf\Python\ExactFit\artifacts\refrigerator_targeted_evidence\517411c43bb545011c7b4e4060318c83a54afa0935f08f2018997188c2f6c0f7.json]

Why this value was used

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top [cache: C:\Source Code\windsurf\Python\ExactFit\artifacts\refrigerator_targeted_evidence\517411c43bb545011c7b4e4060318c83a54afa0935f08f2018997188c2f6c0f7.json]

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: shared Samsung model family; evidence donor RS22T5561SRAA

Confidence label: medium.

Primary evidence

[PDF] RS22T5561SR
s7d2.scene7.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung documented sibling/platform propagation from RS22T5561SRAA: Cached exact-model result: Allow
Reviewed: 2026-09-05

Samsung documented sibling/platform propagation from RS22T5561SRAA: Cached exact-model result: Allow 1" minimum clearance at rear [cache: C:\Source Code\windsurf\Python\ExactFit\artifacts\refrigerator_web_evidence_remaining\77b14aaf6796c13ca61a433f7fe998751cec139614fc70a9ec50dfa9bfeefa08.json]

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 1 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: shared Samsung model family; evidence donor RS22T5561SRAA

Confidence label: medium.

Primary evidence

[PDF] RS22T5561SR
s7d2.scene7.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung documented sibling/platform propagation from RS22T5561SRAA: Cached exact-model result: Allow
Reviewed: 2026-09-05

Samsung documented sibling/platform propagation from RS22T5561SRAA: Cached exact-model result: Allow 2.5" of clearance on hinge side [cache: C:\Source Code\windsurf\Python\ExactFit\artifacts\refrigerator_web_evidence_remaining\77b14aaf6796c13ca61a433f7fe998751cec139614fc70a9ec50dfa9bfeefa08.json]

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 2.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in mapped from populated width_doors_closed_in; doors do not materially change closed product width

Confidence label: low.

Primary evidence

Samsung RS27T5200SGAA Side-by-Side Refrigerators | Ohio | Grove
groveappliance.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Low-confidence same-appliance width mapping: case_width_in=35.88 in from width_doors_closed_in.
Reviewed: 2026-09-04

Low-confidence same-appliance width mapping: case_width_in=35.88 in from width_doors_closed_in.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 35.88 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Strong modal installation clearance for this manufacturer family

Confidence label: low.

Primary evidence

Samsung measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pa
Reviewed: 2026-09-04

Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.