Measurement evidence for Samsung RS23A500ASRAA

Value used by ExactFit

35.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from RS22T5201SRAA, RS22T5561SRAA

Confidence label: medium.

Primary evidence

Samsung measurement source — rs22t5201sr-aa
device.report · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Medium-confidence chassis inference from RS22T5201SRAA, RS22T5561SRAA. Donors unanimously report wid
Reviewed: 2026-09-04

Medium-confidence chassis inference from RS22T5201SRAA, RS22T5561SRAA. Donors unanimously report width_doors_closed_in=35.875 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Product Width = 35.875 in | Samsung RS22T5201SR AA Model/Supplier Specific Specifications ; Product Width, 35 7/8 inches ; Height To Top Of Refrigerator (Without Hinges), 68 5/8 inches ; Height To Top

Why this value was used

Medium-confidence chassis inference from RS22T5201SRAA, RS22T5561SRAA. Donors unanimously report width_doors_closed_in=35.875 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Product Width = 35.875 in | Samsung RS22T5201SR AA Model/Supplier Specific Specifications ; Product Width, 35 7/8 inches ; Height To Top Of Refrigerator (Without Hinges), 68 5/8 inches ; Height To Top Calculation or inference: same-brand product-class chassis propagation from RS22T5201SRAA, RS22T5561SRAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.62 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 23-cu-ft-smart-counter-depth-side-by-side-refrigerator-in-stainless-steel-sku-rs23a500asr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height without Hinge: 68.62 in | and Door 35 7/8" W x 70 1/16" H x 28 5/8" D Net Height with Hinge
Reviewed: 2026-09-04

Height without Hinge: 68.62 in | and Door 35 7/8" W x 70 1/16" H x 28 5/8" D Net Height with Hinge 70 1/16" Net Height without Hinge 68 5/8" Net Depth w/o Door Handle 28 5/8" Depth without Door (in) 24" Height (decimal)

Why this value was used

Height without Hinge: 68.62 in | and Door 35 7/8" W x 70 1/16" H x 28 5/8" D Net Height with Hinge 70 1/16" Net Height without Hinge 68 5/8" Net Depth w/o Door Handle 28 5/8" Depth without Door (in) 24" Height (decimal)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.06 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 23-cu-ft-smart-counter-depth-side-by-side-refrigerator-in-stainless-steel-sku-rs23a500asr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height with Hinge: 70.06 in | Dimensions with Hinges, Handles and Door 35 7/8" W x 70 1/16" H x 28 5
Reviewed: 2026-09-04

Height with Hinge: 70.06 in | Dimensions with Hinges, Handles and Door 35 7/8" W x 70 1/16" H x 28 5/8" D Net Height with Hinge 70 1/16" Net Height without Hinge 68 5/8" Net Depth w/o Door Handle 28 5/8" Depth withou

Why this value was used

Height with Hinge: 70.06 in | Dimensions with Hinges, Handles and Door 35 7/8" W x 70 1/16" H x 28 5/8" D Net Height with Hinge 70 1/16" Net Height without Hinge 68 5/8" Net Depth w/o Door Handle 28 5/8" Depth withou

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 23-cu-ft-smart-counter-depth-side-by-side-refrigerator-in-stainless-steel-sku-rs23a500asr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without Door: 24.0 in | nge 70 1/16" Net Height without Hinge 68 5/8" Net Depth w/o Door Handl
Reviewed: 2026-09-04

Depth without Door: 24.0 in | nge 70 1/16" Net Height without Hinge 68 5/8" Net Depth w/o Door Handle 28 5/8" Depth without Door (in) 24" Height (decimal) 70.0625 Width (decimal) 35.875 Depth (decimal) 28.625 Width 35

Why this value was used

Depth without Door: 24.0 in | nge 70 1/16" Net Height without Hinge 68 5/8" Net Depth w/o Door Handle 28 5/8" Depth without Door (in) 24" Height (decimal) 70.0625 Width (decimal) 35.875 Depth (decimal) 28.625 Width 35

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.62 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 23-cu-ft-smart-counter-depth-side-by-side-refrigerator-in-stainless-steel-sku-rs23a500asr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth w/o Door Handle: 28.62 in | x 28 5/8" D Net Height with Hinge 70 1/16" Net Height without Hing
Reviewed: 2026-09-04

Depth w/o Door Handle: 28.62 in | x 28 5/8" D Net Height with Hinge 70 1/16" Net Height without Hinge 68 5/8" Net Depth w/o Door Handle 28 5/8" Depth without Door (in) 24" Height (decimal) 70.0625 Width (decimal) 35.875 Dep

Why this value was used

Depth w/o Door Handle: 28.62 in | x 28 5/8" D Net Height with Hinge 70 1/16" Net Height without Hinge 68 5/8" Net Depth w/o Door Handle 28 5/8" Depth without Door (in) 24" Height (decimal) 70.0625 Width (decimal) 35.875 Dep

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28.62 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 23-cu-ft-smart-counter-depth-side-by-side-refrigerator-in-stainless-steel-sku-rs23a500asr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with Door Handle: 28.62 in | ecimal) 70.0625 Width (decimal) 35.875 Depth (decimal) 28.625 Wid
Reviewed: 2026-09-04

Depth with Door Handle: 28.62 in | ecimal) 70.0625 Width (decimal) 35.875 Depth (decimal) 28.625 Width 35 7/8" Net Depth with Door Handle 28 5/8" Warranty 1 Year One (1) Year Parts and Labor on Refrigerator 5 Years 5-year Par

Why this value was used

Depth with Door Handle: 28.62 in | ecimal) 70.0625 Width (decimal) 35.875 Depth (decimal) 28.625 Width 35 7/8" Net Depth with Door Handle 28 5/8" Warranty 1 Year One (1) Year Parts and Labor on Refrigerator 5 Years 5-year Par

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

46.4375 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from RS22T5201SRAA

Confidence label: medium.

Primary evidence

Samsung measurement source — rs22t5201sr-aa
device.report · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Medium-confidence chassis inference from RS22T5201SRAA. Donors unanimously report depth_doors_open_9
Reviewed: 2026-09-04

Medium-confidence chassis inference from RS22T5201SRAA. Donors unanimously report depth_doors_open_90_in=46.4375 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Exact-model cached specification: Depth. Door 90 Degrees = 46.4375 in | 5 x 30.5 inches … 2.25"D x 37.75"W x 30.5"H. Depth Without Handle 28 5/8 inches Depth. Door 90 Degrees Open 46 7/16 inches Product

Why this value was used

Medium-confidence chassis inference from RS22T5201SRAA. Donors unanimously report depth_doors_open_90_in=46.4375 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Exact-model cached specification: Depth. Door 90 Degrees = 46.4375 in | 5 x 30.5 inches … 2.25"D x 37.75"W x 30.5"H. Depth Without Handle 28 5/8 inches Depth. Door 90 Degrees Open 46 7/16 inches Product Calculation or inference: same-brand product-class chassis propagation from RS22T5201SRAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.875 + 2 * 0.375

Confidence label: medium.

Primary evidence

Samsung measurement source — rs22t5201sr-aa + side gap from the maker's document
device.report · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance
Reviewed: 2026-09-04

Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance on each side.

Why this value was used

Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 35.875 + 2 * 0.375.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.435 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — 59847780-manufacturer's-brochure.pdf
www.nfm.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 70.06 in appliance endpoint + 0.375 in clearance = 70.435 in.
Reviewed: 2026-09-05

Samsung installation envelope: 70.06 in appliance endpoint + 0.375 in clearance = 70.435 in.

Why this value was used

Samsung installation envelope: 70.06 in appliance endpoint + 0.375 in clearance = 70.435 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — SamsungSpecs_980265120.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Recalculated 2026-10-13 with the stored formula from current inputs: depth_case_only_in + rear_clear
Reviewed: 2026-10-13

Recalculated 2026-10-13 with the stored formula from current inputs: depth_case_only_in + rear_clearance_in with depth_case_only_in = 24, rear_clearance_in = 2 = 26 in (previously 25 in).

Why this value was used

Recalculated 2026-10-13 with the stored formula from current inputs: depth_case_only_in + rear_clearance_in with depth_case_only_in = 24, rear_clearance_in = 2 = 26 in (previously 25 in). Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

• 25 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Samsung installation envelope: 24 in appliance endpoint + 1 in clearance = 25 in.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 59847780-manufacturer's-brochure.pdf
www.nfm.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 59847780-manufacturer's-brochure.pdf
www.nfm.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 59847780-manufacturer's-brochure.pdf
www.nfm.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cached exact-model result: Allow a 3/8" minimum clearance at sides and top
Reviewed: 2026-09-05

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Why this value was used

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 83051734.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 17
Reviewed: 2026-10-13

Installation plan, callout 01 (gap behind the refrigerator): more than 2" (50 mm) recommended. The stored 1 in was borrowed from another model's sheet; the model's own manual and the larger-clearance rule give 2 in.

Why this value was used

Installation plan, callout 01 (gap behind the refrigerator): more than 2" (50 mm) recommended. The stored 1 in was borrowed from another model's sheet; the model's own manual and the larger-clearance rule give 2 in.

Other evidence found

• 1 in — superseded

  s7d2.scene7.com; location not retained. Model scope: not separately recorded. Raw value: Samsung documented sibling/platform propagation from RS22T5561SRAA: Cached exact-model result: Allow 1" minimum clearance at rear. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.5 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — RS23A500ASR_V9-3.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-25

Samsung specification sheet RS23A500ASR_V9-3.pdf: "Allow 2.5" of clearance on hinge side of refrigerator when installing next to a wall where handle may make contact." Door angle not stated.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

Samsung specification sheet RS23A500ASR_V9-3.pdf: "Allow 2.5" of clearance on hinge side of refrigerator when installing next to a wall where handle may make contact." Door angle not stated.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.875 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in = width_doors_closed_in

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

Samsung measurement source — rs22t5201sr-aa
device.report · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same-appliance endpoint inference: case width equals exact stored closed width 35.875 in; manufactur
Reviewed: 2026-09-09

Same-appliance endpoint inference: case width equals exact stored closed width 35.875 in; manufacturer does not label a separate case-width endpoint.

Why this value was used

Same-appliance endpoint inference: case width equals exact stored closed width 35.875 in; manufacturer does not label a separate case-width endpoint. Calculation or inference: case_width_in = width_doors_closed_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.