Measurement evidence for Samsung RM80F23VMR

Value used by ExactFit

35.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — WillitFit_RM80F23VMR.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed exact-model cached label: WIDTH = 35.875 in. Context: NOTE: Please allow 3¾" of clearance
Reviewed: 2026-09-04

Reviewed exact-model cached label: WIDTH = 35.875 in. Context: NOTE: Please allow 3¾" of clearance when installing along a wall. DEPTH WITHOUT DOOR 24" WIDTH (FITS 36" OPENING) 35 7/ 8" DEPTH WITH D00R OPEN 43" [...] Please note: The above dimension and cutout information is for planning purpos

Why this value was used

Reviewed exact-model cached label: WIDTH = 35.875 in. Context: NOTE: Please allow 3¾" of clearance when installing along a wall. DEPTH WITHOUT DOOR 24" WIDTH (FITS 36" OPENING) 35 7/ 8" DEPTH WITH D00R OPEN 43" [...] Please note: The above dimension and cutout information is for planning purpos

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — samsung-rm80f23vmr
www.homery.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height Without Hinge = 70.75 in | h:35 7/8" Depth:28 3/4" Height:72 1/2" Depth With Door Opened At 9
Reviewed: 2026-09-04

Height Without Hinge = 70.75 in | h:35 7/8" Depth:28 3/4" Height:72 1/2" Depth With Door Opened At 90 Degrees:43" Height Without Hinges:70 3/4" Depth Without Door:24" ### Features Light Bulb Type:LED ### Technical Details B

Why this value was used

Height Without Hinge = 70.75 in | h:35 7/8" Depth:28 3/4" Height:72 1/2" Depth With Door Opened At 90 Degrees:43" Height Without Hinges:70 3/4" Depth Without Door:24" ### Features Light Bulb Type:LED ### Technical Details B

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

73 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — WillitFit_RM80F23VMR.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: VMR - image-us.samsung.com DEPTH TO DOOR 283/ 4 " HEIGHT WITH HINGE 73 " Counter-Depth Refrigerator
Reviewed: 2026-09-04

VMR - image-us.samsung.com DEPTH TO DOOR 283/ 4 " HEIGHT WITH HINGE 73 " Counter-Depth Refrigerator Counter-depth models s

Why this value was used

VMR - image-us.samsung.com DEPTH TO DOOR 283/ 4 " HEIGHT WITH HINGE 73 " Counter-Depth Refrigerator Counter-depth models s

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — WillitFit_RM80F23VMR.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: DEPTH WITHOUT DOOR = 24.0 in | N 90° 2 1/ 4" NOTE: Please allow 3¾" of clearance when installing alo
Reviewed: 2026-09-04

DEPTH WITHOUT DOOR = 24.0 in | N 90° 2 1/ 4" NOTE: Please allow 3¾" of clearance when installing along a wall. DEPTH WITHOUT DOOR 24" WIDTH (FITS 36" OPENING) 35 7/ 8" DEPTH WITH D00R OPEN 43" [...] Please note: T

Why this value was used

DEPTH WITHOUT DOOR = 24.0 in | N 90° 2 1/ 4" NOTE: Please allow 3¾" of clearance when installing along a wall. DEPTH WITHOUT DOOR 24" WIDTH (FITS 36" OPENING) 35 7/ 8" DEPTH WITH D00R OPEN 43" [...] Please note: T

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.75 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: matching RM80F23VMR chassis propagation

Confidence label: medium.

Primary evidence

Samsung measurement source — 217362.html
www.abt.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact RM80F23VMRAA listing: Depth Without Handles 28.75 in; all structural dimensions match RM80F23V
Reviewed: 2026-09-04

Exact RM80F23VMRAA listing: Depth Without Handles 28.75 in; all structural dimensions match RM80F23VMR.

Why this value was used

Exact RM80F23VMRAA listing: Depth Without Handles 28.75 in; all structural dimensions match RM80F23VMR. Calculation or inference: matching RM80F23VMR chassis propagation.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — samsung-rm80f23vmr
www.homery.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed exact-model cached label: Depth = 28.75 in. Context: ainless Steel Back ### Dimensions Coun
Reviewed: 2026-09-04

Reviewed exact-model cached label: Depth = 28.75 in. Context: ainless Steel Back ### Dimensions Counter/Depth:Yes Exterior Width:36" Width:35 7/8" Depth:28 3/4" Height:72 1/2" Depth With Door Opened At 90 Degrees:43" Height Without Hinges:70 3/4" Depth Without Door:

Why this value was used

Reviewed exact-model cached label: Depth = 28.75 in. Context: ainless Steel Back ### Dimensions Counter/Depth:Yes Exterior Width:36" Width:35 7/8" Depth:28 3/4" Height:72 1/2" Depth With Door Opened At 90 Degrees:43" Height Without Hinges:70 3/4" Depth Without Door:

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

43 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — samsung-rm80f23vmr
www.homery.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth:28 3/4" Height:72 1/2" Depth With Door Opened At 90 Degrees = 43.0 in | ss Steel Back ### Dime
Reviewed: 2026-09-04

Depth:28 3/4" Height:72 1/2" Depth With Door Opened At 90 Degrees = 43.0 in | ss Steel Back ### Dimensions Counter/Depth:Yes Exterior Width:36" Width:35 7/8" Depth:28 3/4" Height:72 1/2" Depth With Door Opened At 90 Degrees:43" Height Without Hinges:70 3/4" Depth Without Door:24" ### Features Light Bulb Ty

Why this value was used

Depth:28 3/4" Height:72 1/2" Depth With Door Opened At 90 Degrees = 43.0 in | ss Steel Back ### Dimensions Counter/Depth:Yes Exterior Width:36" Width:35 7/8" Depth:28 3/4" Height:72 1/2" Depth With Door Opened At 90 Degrees:43" Height Without Hinges:70 3/4" Depth Without Door:24" ### Features Light Bulb Ty

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.875 + 2 * 0.375

Confidence label: medium.

Primary evidence

Samsung measurement source — WillitFit_RM80F23VMR.pdf + WillitFit_RM80F23VMR.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance
Reviewed: 2026-09-04

Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance on each side.

Why this value was used

Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 35.875 + 2 * 0.375.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

73.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — WillitFit_RM80F23VMR.pdf
Samsung · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 73.0 in plus documented top clearance 0.375 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 73.0 in plus documented top clearance 0.375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — RF23DB9700QLAA_specification-sheet.pdf
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening depth derived from case-only depth 24.0 in plus propagated rear clearance 2.0 in.
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 24.0 in plus propagated rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 24.0 in plus propagated rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — WillitFit_RM80F23VMR.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Exact-model Samsung fit guide: allow a 3/8" minimum clearance at sides and top.

Why this value was used

Exact-model Samsung fit guide: allow a 3/8" minimum clearance at sides and top.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — WillitFit_RM80F23VMR.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Exact-model Samsung fit guide: allow a 3/8" minimum clearance at sides and top.

Why this value was used

Exact-model Samsung fit guide: allow a 3/8" minimum clearance at sides and top.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: top_clearance_in = reviewed side clearance because source explicitly states sides and top

Confidence label: high.

Primary evidence

Samsung measurement source — WillitFit_RM80F23VMR.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Stored reviewed evidence explicitly applies the same clearance to sides and top. Exact-model Samsung fit guide: allow a 3/8" minimum clearance at sides and top.

Why this value was used

Stored reviewed evidence explicitly applies the same clearance to sides and top. Exact-model Samsung fit guide: allow a 3/8" minimum clearance at sides and top.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Samsung RF23DB9700QLAA

Confidence label: medium.

Primary evidence

Samsung measurement source — RF23DB9700QLAA_specification-sheet.pdf
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF23DB9700QLAA; original e
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF23DB9700QLAA; original evidence: 2” minimum clearance at rear

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF23DB9700QLAA; original evidence: 2” minimum clearance at rear Calculation or inference: exact 8-dimension chassis signature; source model Samsung RF23DB9700QLAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — b1c0add1232cb80bdea6aa340fca87389c2e33619ba4b262827b2f69e101b84e.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-03

Allow 3 3/4 in of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall. The largest door-swing clearance printed for this model is stored (owner rule for clearances); the spec sheets' 2.5 in is where the handle may touch the wall.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

Allow 3 3/4 in of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall. The largest door-swing clearance printed for this model is stored (owner rule for clearances); the spec sheets' 2.5 in is where the handle may touch the wall.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.875 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in = width_doors_closed_in

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

Samsung measurement source — WillitFit_RM80F23VMR.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same-appliance endpoint inference: case width equals exact stored closed width 35.875 in; manufactur
Reviewed: 2026-09-09

Same-appliance endpoint inference: case width equals exact stored closed width 35.875 in; manufacturer does not label a separate case-width endpoint.

Why this value was used

Same-appliance endpoint inference: case width equals exact stored closed width 35.875 in; manufacturer does not label a separate case-width endpoint. Calculation or inference: case_width_in = width_doors_closed_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.