Measurement evidence for Samsung RF90F23AECEAA

Value used by ExactFit

35.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — 854752-samsung-rf90f23aeceaa
www.easyrentwichitafalls.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Width = 35.75 in | Samsung Refrigerators RF90F23AECEAA (French
Reviewed: 2026-09-04

Plain exact-model specification row: Width = 35.75 in | Samsung Refrigerators RF90F23AECEAA (French 4-Door ... Specifications / Choose an option ; Width, 35.75 inch(es) / 90.81 cm ; Height (With Hinge), 70.25 inch(es) / 178.44 cm ; Depth (Without Handles), 28.75 inch(es) /

Why this value was used

Plain exact-model specification row: Width = 35.75 in | Samsung Refrigerators RF90F23AECEAA (French 4-Door ... Specifications / Choose an option ; Width, 35.75 inch(es) / 90.81 cm ; Height (With Hinge), 70.25 inch(es) / 178.44 cm ; Depth (Without Handles), 28.75 inch(es) /

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 105584242.pdf
www.easyrentwichitafalls.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 19
Reviewed: 2026-10-03

Clearance table: RF90F23* C (height without hinge) 68 7/8 in (1749 mm), D (overall height) 70 1/4 in (1785 mm).

Why this value was used

Clearance table: RF90F23* C (height without hinge) 68 7/8 in (1749 mm), D (overall height) 70 1/4 in (1785 mm).

Other evidence found

• 68.75 in — superseded

  www.easyrentwichitafalls.com; location not retained. Model scope: not separately recorded. Raw value: (s) / 151.05 kg | | Additional Dimensions | • Net Case Height without Hinge (inch): 68.75 inch • Net Depth without Door (inch): 24 inch | | SH. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 105584242.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 19
Reviewed: 2026-10-03

Clearance table: RF90F23* C (height without hinge) 68 7/8 in (1749 mm), D (overall height) 70 1/4 in (1785 mm).

Why this value was used

Clearance table: RF90F23* C (height without hinge) 68 7/8 in (1749 mm), D (overall height) 70 1/4 in (1785 mm).

Other evidence found

• 70 in — superseded

  www.samsung.com; location not retained. Model scope: not separately recorded. Raw value: Height with Hinge: 70.0 in | Product Dimensions with Door with Handles 35 3/4(W) x 70 1/4(H) x 28 3/4(D) Net Height with Hinge 70" Height (extra) \+ 2 inches for ventillation Width (extra) \+ 3 inches for open . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — 854752-samsung-rf90f23aeceaa
www.easyrentwichitafalls.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: ase Height without Hinge (inch): 68.75 inch • Net Depth without Door (inch): 24 inch | | SHIPPING DI
Reviewed: 2026-09-04

ase Height without Hinge (inch): 68.75 inch • Net Depth without Door (inch): 24 inch | | SHIPPING DIMENSIONS | | | Width | 38.25 inc

Why this value was used

ase Height without Hinge (inch): 68.75 inch • Net Depth without Door (inch): 24 inch | | SHIPPING DIMENSIONS | | | Width | 38.25 inc

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — 854752-samsung-rf90f23aeceaa
www.easyrentwichitafalls.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: ght (With Hinge) | 70.25 inch(es) / 178.44 cm | | Depth (Without Handles) | 28.75 inch(es) / 73.03 c
Reviewed: 2026-09-04

ght (With Hinge) | 70.25 inch(es) / 178.44 cm | | Depth (Without Handles) | 28.75 inch(es) / 73.03 cm | | Depth (With Handles) | 28.75

Why this value was used

ght (With Hinge) | 70.25 inch(es) / 178.44 cm | | Depth (Without Handles) | 28.75 inch(es) / 73.03 cm | | Depth (With Handles) | 28.75

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — 854752-samsung-rf90f23aeceaa
www.easyrentwichitafalls.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: (Without Handles) | 28.75 inch(es) / 73.03 cm | | Depth (With Handles) | 28.75 inch(es) / 73.03 cm |
Reviewed: 2026-09-04

(Without Handles) | 28.75 inch(es) / 73.03 cm | | Depth (With Handles) | 28.75 inch(es) / 73.03 cm | | Weight | 333.01 lb(s) / 151.

Why this value was used

(Without Handles) | 28.75 inch(es) / 73.03 cm | | Depth (With Handles) | 28.75 inch(es) / 73.03 cm | | Weight | 333.01 lb(s) / 151.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

43 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from RF24BB6200QLAA, RF24BB6600QLAA, RF70F23DER

Confidence label: medium.

Primary evidence

Samsung measurement source — samsung-rf24bb6200qlaa
www.homery.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Medium-confidence chassis inference from RF24BB6200QLAA, RF24BB6600QLAA, RF70F23DER. Donors unanimou
Reviewed: 2026-09-04

Medium-confidence chassis inference from RF24BB6200QLAA, RF24BB6600QLAA, RF70F23DER. Donors unanimously report depth_doors_open_90_in=43.0 in; at least four direct chassis dimensions match and none conflict. Matching fields: width_doors_closed_in, height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in. Donor evidence: Depth With Door Opened At 90 Degrees = 43.0 in | Width:36" Width:35 3/4" Depth:28 3/4" Height:70" Depth Without Handles:28 3/4" Depth With Door Opened At 90 Degrees:43" Counter/Depth:Yes Height Without Hinges:68 7/8" Depth Without Door:24" ### Tech

Why this value was used

Medium-confidence chassis inference from RF24BB6200QLAA, RF24BB6600QLAA, RF70F23DER. Donors unanimously report depth_doors_open_90_in=43.0 in; at least four direct chassis dimensions match and none conflict. Matching fields: width_doors_closed_in, height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in. Donor evidence: Depth With Door Opened At 90 Degrees = 43.0 in | Width:36" Width:35 3/4" Depth:28 3/4" Height:70" Depth Without Handles:28 3/4" Depth With Door Opened At 90 Degrees:43" Counter/Depth:Yes Height Without Hinges:68 7/8" Depth Without Door:24" ### Tech Calculation or inference: same-brand product-class chassis propagation from RF24BB6200QLAA, RF24BB6600QLAA, RF70F23DER.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.75 + 2 * 0.375

Confidence label: medium.

Primary evidence

Samsung measurement source — 854752-samsung-rf90f23aeceaa + side gap from the maker's document
www.easyrentwichitafalls.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on
Reviewed: 2026-09-04

Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on each side.

Why this value was used

Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 35.75 + 2 * 0.375.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: high.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — Samsung_RF90F23BECR_Refrigeration_Specifications_Sheet.pdf
assets.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Recalculated 2026-10-04 with the stored formula from current inputs: max(height_case_in,height_hinge
Reviewed: 2026-10-03

Recalculated 2026-10-04 with the stored formula from current inputs: max(height_case_in,height_hinge_in) + top_clearance_in with height_case_in = 68.875, height_hinge_in = 70.25, top_clearance_in = 0.375 = 70.625 in (previously 70.375 in).

Why this value was used

Recalculated 2026-10-04 with the stored formula from current inputs: max(height_case_in,height_hinge_in) + top_clearance_in with height_case_in = 68.875, height_hinge_in = 70.25, top_clearance_in = 0.375 = 70.625 in (previously 70.375 in). Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

• 70.375 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — 7cadc216-13ab-4ea1-a8e7-11fdaba9e526.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 24 in appliance endpoint + 2 in clearance = 26 in.
Reviewed: 2026-09-05

Samsung installation envelope: 24 in appliance endpoint + 2 in clearance = 26 in.

Why this value was used

Samsung installation envelope: 24 in appliance endpoint + 2 in clearance = 26 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — Samsung_RF90F23BECR_Refrigeration_Specifications_Sheet.pdf
assets.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — Samsung_RF90F23BECR_Refrigeration_Specifications_Sheet.pdf
assets.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — Samsung_RF90F23BECR_Refrigeration_Specifications_Sheet.pdf
assets.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cached exact-model result: Allow a 3/8" minimum clearance at sides and top
Reviewed: 2026-09-05

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Why this value was used

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 7cadc216-13ab-4ea1-a8e7-11fdaba9e526.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cached exact-model result: Allow 2" minimum clearance at rear
Reviewed: 2026-09-05

Cached exact-model result: Allow 2" minimum clearance at rear

Why this value was used

Cached exact-model result: Allow 2" minimum clearance at rear

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — WillitFit_RF90F23BECR.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-25

Samsung Will-it-fit sheet for RF90F23BECR, the same RF90F23 cabinet (identical width, height and depth): "Allow 3 3/4" of clearance when installing along a wall" so the door opens 90 degrees without the handle contacting the wall. No separate sheet is published for this variant.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

Samsung Will-it-fit sheet for RF90F23BECR, the same RF90F23 cabinet (identical width, height and depth): "Allow 3 3/4" of clearance when installing along a wall" so the door opens 90 degrees without the handle contacting the wall. No separate sheet is published for this variant. Calculation or inference: agent blind extraction visually confirmed.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.75 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in = width_doors_closed_in

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

Samsung measurement source — 854752-samsung-rf90f23aeceaa
www.easyrentwichitafalls.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same-appliance endpoint inference: case width equals exact stored closed width 35.75 in; manufacture
Reviewed: 2026-09-09

Same-appliance endpoint inference: case width equals exact stored closed width 35.75 in; manufacturer does not label a separate case-width endpoint.

Why this value was used

Same-appliance endpoint inference: case width equals exact stored closed width 35.75 in; manufacturer does not label a separate case-width endpoint. Calculation or inference: case_width_in = width_doors_closed_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.