Measurement evidence for Samsung RF32CG5D00SRAA

Value used by ExactFit

35.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from RF31CG7200SR, RF32CG5400SRAA, RF32CG5900SR, RF32CG5B30SRAA

Confidence label: medium.

Primary evidence

Samsung measurement source — ed9b4347-bd1a-4e5e-ba8a-1584d71bc456.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Medium-confidence chassis inference from RF31CG7200SR, RF32CG5400SRAA, RF32CG5900SR, RF32CG5B30SRAA.
Reviewed: 2026-09-04

Medium-confidence chassis inference from RF31CG7200SR, RF32CG5400SRAA, RF32CG5900SR, RF32CG5B30SRAA. Donors unanimously report width_doors_closed_in=35.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_with_handles_in. Donor evidence: Product width 35 3/4 in

Why this value was used

Medium-confidence chassis inference from RF31CG7200SR, RF32CG5400SRAA, RF32CG5900SR, RF32CG5B30SRAA. Donors unanimously report width_doors_closed_in=35.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_with_handles_in. Donor evidence: Product width 35 3/4 in Calculation or inference: same-brand product-class chassis propagation from RF31CG7200SR, RF32CG5400SRAA, RF32CG5900SR, RF32CG5B30SRAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.87 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rf32cg5d00sraa
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: Height without Hinge = 68.87 in | Handles and Door","35 3/4 x 70 x
Reviewed: 2026-09-04

Exact-model cached specification: Height without Hinge = 68.87 in | Handles and Door","35 3/4 x 70 x 36 2/8 inch","Net Height with Hinge","70","Net Height without Hinge","68.87","Net Depth w/o Door Handle","33.875","Depth without Door (in)","29.438","Produc

Why this value was used

Exact-model cached specification: Height without Hinge = 68.87 in | Handles and Door","35 3/4 x 70 x 36 2/8 inch","Net Height with Hinge","70","Net Height without Hinge","68.87","Net Depth w/o Door Handle","33.875","Depth without Door (in)","29.438","Produc

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rf32cg5d00sraa
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: Height with Hinge = 70.0 in | duct Dimensions with Hinges, Handles
Reviewed: 2026-09-04

Exact-model cached specification: Height with Hinge = 70.0 in | duct Dimensions with Hinges, Handles and Door","35 3/4 x 70 x 36 2/8 inch","Net Height with Hinge","70","Net Height without Hinge","68.87","Net Depth w/o Door Handle","33.875","Depth

Why this value was used

Exact-model cached specification: Height with Hinge = 70.0 in | duct Dimensions with Hinges, Handles and Door","35 3/4 x 70 x 36 2/8 inch","Net Height with Hinge","70","Net Height without Hinge","68.87","Net Depth w/o Door Handle","33.875","Depth

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.438 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rf32cg5d00sraa
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: Depth without Door = 29.438 in | ","70","Net Height without Hinge"
Reviewed: 2026-09-04

Exact-model cached specification: Depth without Door = 29.438 in | ","70","Net Height without Hinge","68.87","Net Depth w/o Door Handle","33.875","Depth without Door (in)","29.438","Product Dimensions with hinge","Height (extra)","+ 2 inches for ventilation","

Why this value was used

Exact-model cached specification: Depth without Door = 29.438 in | ","70","Net Height without Hinge","68.87","Net Depth w/o Door Handle","33.875","Depth without Door (in)","29.438","Product Dimensions with hinge","Height (extra)","+ 2 inches for ventilation","

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33.875 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — 236752.html
www.abt.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model listing and Samsung family diagram agree: Depth Without Handles 33 7/8 in.
Reviewed: 2026-09-04

Exact-model listing and Samsung family diagram agree: Depth Without Handles 33 7/8 in.

Why this value was used

Exact-model listing and Samsung family diagram agree: Depth Without Handles 33 7/8 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rf32cg5d00sraa
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with Door Handle = 36.25 in | d Door | 35 3/4 x 68 7/8 x 29 1/2 inch | | Width (decimal) | 35.
Reviewed: 2026-09-04

Depth with Door Handle = 36.25 in | d Door | 35 3/4 x 68 7/8 x 29 1/2 inch | | Width (decimal) | 35.75 inch | | Net Depth with Door Handle | 36.25 inch | | Product Dimensions without Door without Handles | 35.75 x 70 x 29.438 inc

Why this value was used

Depth with Door Handle = 36.25 in | d Door | 35 3/4 x 68 7/8 x 29 1/2 inch | | Width (decimal) | 35.75 inch | | Net Depth with Door Handle | 36.25 inch | | Product Dimensions without Door without Handles | 35.75 x 70 x 29.438 inc

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

48.5 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from RF31CG7200SR, RF32CG5900SR

Confidence label: medium.

Primary evidence

Samsung measurement source — ed9b4347-bd1a-4e5e-ba8a-1584d71bc456.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Medium-confidence chassis inference from RF31CG7200SR, RF32CG5900SR. Donors unanimously report depth
Reviewed: 2026-09-04

Medium-confidence chassis inference from RF31CG7200SR, RF32CG5900SR. Donors unanimously report depth_doors_open_90_in=48.5 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_with_handles_in. Donor evidence: 90-degree top-view product depth 48 1/2 in; separate 53 in drawer-open dimension

Why this value was used

Medium-confidence chassis inference from RF31CG7200SR, RF32CG5900SR. Donors unanimously report depth_doors_open_90_in=48.5 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_with_handles_in. Donor evidence: 90-degree top-view product depth 48 1/2 in; separate 53 in drawer-open dimension Calculation or inference: same-brand product-class chassis propagation from RF31CG7200SR, RF32CG5900SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.75 + 2 * 0.375

Confidence label: medium.

Primary evidence

Samsung measurement source — ed9b4347-bd1a-4e5e-ba8a-1584d71bc456.pdf + side gap from the maker's document
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on
Reviewed: 2026-09-04

Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on each side.

Why this value was used

Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 35.75 + 2 * 0.375.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — WillitFit_RF261BEAE.pdf
Samsung · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in.
Reviewed: 2026-09-05

Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in.

Why this value was used

Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.438 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — WillitFit_RF32CG5300SR_V3.pdf
Samsung · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 29.438 in appliance endpoint + 2 in clearance = 31.438 in.
Reviewed: 2026-09-05

Samsung installation envelope: 29.438 in appliance endpoint + 2 in clearance = 31.438 in.

Why this value was used

Samsung installation envelope: 29.438 in appliance endpoint + 2 in clearance = 31.438 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — WillitFit_RF261BEAE.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — WillitFit_RF261BEAE.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — WillitFit_RF261BEAE.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cached exact-model result: Allow a 3/8" minimum clearance at sides and top
Reviewed: 2026-09-05

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Why this value was used

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — WillitFit_RF32CG5300SR_V3.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cached exact-model result: Allow 2" minimum clearance at rear
Reviewed: 2026-09-05

Cached exact-model result: Allow 2" minimum clearance at rear

Why this value was used

Cached exact-model result: Allow 2" minimum clearance at rear

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

Samsung measurement source — 106221372.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 22
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). minimum clearance of 3 3/ 4" (95 mm) from the wall

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). minimum clearance of 3 3/ 4" (95 mm) from the wall

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.75 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from RF31CG7200SR, RF32CG5900SR

Confidence label: medium.

Primary evidence

Samsung measurement source — ed9b4347-bd1a-4e5e-ba8a-1584d71bc456.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Medium-confidence chassis inference from RF31CG7200SR, RF32CG5900SR. Donors unanimously report case_
Reviewed: 2026-09-04

Medium-confidence chassis inference from RF31CG7200SR, RF32CG5900SR. Donors unanimously report case_width_in=35.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_with_handles_in. Donor evidence: Dimensions without hinges and door: width 35 3/4 in

Why this value was used

Medium-confidence chassis inference from RF31CG7200SR, RF32CG5900SR. Donors unanimously report case_width_in=35.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_with_handles_in. Donor evidence: Dimensions without hinges and door: width 35 3/4 in Calculation or inference: same-brand product-class chassis propagation from RF31CG7200SR, RF32CG5900SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.