Measurement evidence for Samsung RF32CG5B10SRAA

Value used by ExactFit

35.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from RF32CG5400SRAA, RF32CG5900SR

Confidence label: medium.

Primary evidence

Samsung measurement source — Samsung_RF32CG5400SRAA_French_Door_Refrigerator_Samsung_RF32CG5400SRAA.html
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Medium-confidence chassis inference from RF32CG5400SRAA, RF32CG5900SR. Donors unanimously report wid
Reviewed: 2026-09-04

Medium-confidence chassis inference from RF32CG5400SRAA, RF32CG5900SR. Donors unanimously report width_doors_closed_in=35.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_with_handles_in. Donor evidence: Plain exact-model specification row: Width = 35.75 in | | Capacity: Freezer | 9.2 cu. ft. | | Capacity Description | 31 cu. ft. Mega Capacity (marketing) | | Width | 35 3/4 in (35.75 in / 91 cm) | | Height (Overall, with Hinge) | 70 in (178 cm) | | Height to Top of Case (Without Hinge) | 68 7/8

Why this value was used

Medium-confidence chassis inference from RF32CG5400SRAA, RF32CG5900SR. Donors unanimously report width_doors_closed_in=35.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_with_handles_in. Donor evidence: Plain exact-model specification row: Width = 35.75 in | | Capacity: Freezer | 9.2 cu. ft. | | Capacity Description | 31 cu. ft. Mega Capacity (marketing) | | Width | 35 3/4 in (35.75 in / 91 cm) | | Height (Overall, with Hinge) | 70 in (178 cm) | | Height to Top of Case (Without Hinge) | 68 7/8 Calculation or inference: same-brand product-class chassis propagation from RF32CG5400SRAA, RF32CG5900SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 31-cu-ft-mega-capacity-3-door-french-door-refrigerator-with-external-water-and-ice-dispenser-in-stainless-steel-sku-rf32cg5b10sraa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Net Height without Hinge 68 7/8"
Reviewed: 2026-09-04

Net Height without Hinge 68 7/8"

Why this value was used

Net Height without Hinge 68 7/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — d9dae7a4-a370-4a9a-9abd-1f4b05e99c81.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: ENSIONS 125° 125° 58" 111/8" DEPTH TO DOOR 33⁷/₈" HEIGHT WITH HINGE 70" HEIGHT WITHOUT HINGE 68⁷/₈"
Reviewed: 2026-09-04

ENSIONS 125° 125° 58" 111/8" DEPTH TO DOOR 33⁷/₈" HEIGHT WITH HINGE 70" HEIGHT WITHOUT HINGE 68⁷/₈" DEPTH WITHOUT DOOR 29

Why this value was used

ENSIONS 125° 125° 58" 111/8" DEPTH TO DOOR 33⁷/₈" HEIGHT WITH HINGE 70" HEIGHT WITHOUT HINGE 68⁷/₈" DEPTH WITHOUT DOOR 29

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 31-cu-ft-mega-capacity-3-door-french-door-refrigerator-with-external-water-and-ice-dispenser-in-stainless-steel-sku-rf32cg5b10sraa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without Door (in) 29 1/2"
Reviewed: 2026-09-04

Depth without Door (in) 29 1/2"

Why this value was used

Depth without Door (in) 29 1/2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 31-cu-ft-mega-capacity-3-door-french-door-refrigerator-with-external-water-and-ice-dispenser-in-stainless-steel-sku-rf32cg5b10sraa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Net Depth w/o Door Handle 34 5/8"
Reviewed: 2026-09-04

Net Depth w/o Door Handle 34 5/8"

Why this value was used

Net Depth w/o Door Handle 34 5/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 31-cu-ft-mega-capacity-3-door-french-door-refrigerator-with-external-water-and-ice-dispenser-in-stainless-steel-sku-rf32cg5b10sraa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Net Depth with Door Handle 36 1/4"
Reviewed: 2026-09-04

Net Depth with Door Handle 36 1/4"

Why this value was used

Net Depth with Door Handle 36 1/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

48.5 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from RF32CG5900SR

Confidence label: medium.

Primary evidence

Samsung measurement source — fruflhkaifcu.pdf
images.webfronts.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Medium-confidence chassis inference from RF32CG5900SR. Donors unanimously report depth_doors_open_90_in=48.5 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Depth with door open 90°: 48 1/2"

Why this value was used

Medium-confidence chassis inference from RF32CG5900SR. Donors unanimously report depth_doors_open_90_in=48.5 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Depth with door open 90°: 48 1/2" Calculation or inference: same-brand product-class chassis propagation from RF32CG5900SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.75 + 2 * 0.375

Confidence label: medium.

Primary evidence

Samsung measurement source — Samsung_RF32CG5400SRAA_French_Door_Refrigerator_Samsung_RF32CG5400SRAA.html + side gap from the maker's document
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on
Reviewed: 2026-09-04

Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on each side.

Why this value was used

Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 35.75 + 2 * 0.375.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — fruflhkaifcu.pdf
images.webfronts.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 70.0 in plus propagated top clearance 0.375 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 70.0 in plus propagated top clearance 0.375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — 38c0e54262437c0158d8351936a63e1126cf3639350c753cb14f87edb671f828.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.5 in plus propagated rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 29.5 in plus propagated rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — fruflhkaifcu.pdf
images.webfronts.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — fruflhkaifcu.pdf
images.webfronts.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Samsung RF32CG5900SR

Confidence label: medium.

Primary evidence

Samsung measurement source — fruflhkaifcu.pdf
images.webfronts.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF32CG5900SR; original evidence: Stored reviewed evidence explicitly applies the same clearance to sides and top. Allow a 3/8" minimum clearance at sides and top

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF32CG5900SR; original evidence: Stored reviewed evidence explicitly applies the same clearance to sides and top. Allow a 3/8" minimum clearance at sides and top Calculation or inference: exact 8-dimension chassis signature; source model Samsung RF32CG5900SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Samsung RF32CG5900SR

Confidence label: medium.

Primary evidence

Samsung measurement source — 38c0e54262437c0158d8351936a63e1126cf3639350c753cb14f87edb671f828.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF32CG5900SR; original evidence: 2" minimum clearance at rear

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF32CG5900SR; original evidence: 2" minimum clearance at rear Calculation or inference: exact 8-dimension chassis signature; source model Samsung RF32CG5900SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

4.25 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 38c0e54262437c0158d8351936a63e1126cf3639350c753cb14f87edb671f828.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-03

Allow 4 1/4 in of clearance to enable doors to open 90 degrees when installed next to a wall. The largest door-swing clearance printed for this model is stored (owner rule for clearances); the spec sheets' 2.5 in is where the handle may touch the wall.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

Allow 4 1/4 in of clearance to enable doors to open 90 degrees when installed next to a wall. The largest door-swing clearance printed for this model is stored (owner rule for clearances); the spec sheets' 2.5 in is where the handle may touch the wall.

Other evidence found

• 3.75 in — superseded

  Document 94883444.pdf; page 22. Model scope: not separately recorded. Raw value: When you install the refrigerator next to a fixed wall, you must provide a minimum clearance of 3 3/4 in (95 mm) from the wall to allow the door to swing open. The spec sheet's 2.5 in is the space where the handle may make contact (same reading as RS27T5200SR/AA, batch 7).. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.75 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from RF32CG5900SR

Confidence label: medium.

Primary evidence

Samsung measurement source — fruflhkaifcu.pdf
images.webfronts.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Medium-confidence chassis inference from RF32CG5900SR. Donors unanimously report case_width_in=35.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Dimensions without hinges and door: 35 3/4" x 68 7/8" x 29 1/2"

Why this value was used

Medium-confidence chassis inference from RF32CG5900SR. Donors unanimously report case_width_in=35.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Dimensions without hinges and door: 35 3/4" x 68 7/8" x 29 1/2" Calculation or inference: same-brand product-class chassis propagation from RF32CG5900SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.