Measurement evidence for Samsung RF31CG7200SRAA

Value used by ExactFit

35.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Buy Samsung French Door Refrigerators | RF31CG7200SRAA
myeliteappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Width = 35.75 in | g RF31CG7200SRAA French Door Refrigerators |
Reviewed: 2026-09-04

Plain exact-model specification row: Width = 35.75 in | g RF31CG7200SRAA French Door Refrigerators | Smithfield | Elite Appliances and Cabinets | | | --- | | Width | 35.75 in. | | Height | 70 in. | | Length | Weight | Product Dimensions without Hinges or Handles | 35 3/4" W 68 7/8" H 34 5/8" D

Why this value was used

Plain exact-model specification row: Width = 35.75 in | g RF31CG7200SRAA French Door Refrigerators | Smithfield | Elite Appliances and Cabinets | | | --- | | Width | 35.75 in. | | Height | 70 in. | | Length | Weight | Product Dimensions without Hinges or Handles | 35 3/4" W 68 7/8" H 34 5/8" D

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied height_case_in=68.875 in from RF31CG7200SR

Confidence label: medium.

Primary evidence

RF31CG7200SR
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same Samsung model with/without regional AA suffix; copied height_case_in=68.875 in from RF31CG7200S
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied height_case_in=68.875 in from RF31CG7200SR

Why this value was used

Same Samsung model with/without regional AA suffix; copied height_case_in=68.875 in from RF31CG7200SR Calculation or inference: Same Samsung model with/without regional AA suffix; copied height_case_in=68.875 in from RF31CG7200SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Buy Samsung French Door Refrigerators | RF31CG7200SRAA
myeliteappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Height = 70.0 in | h Door Refrigerators | Smithfield | Elite Ap
Reviewed: 2026-09-04

Plain exact-model specification row: Height = 70.0 in | h Door Refrigerators | Smithfield | Elite Appliances and Cabinets | | | --- | | Width | 35.75 in. | | Height | 70 in. | | Length | Weight | Product Dimensions without Hinges or Handles | 35 3/4" W 68 7/8" H 34 5/8" D | | Product Dimensio

Why this value was used

Plain exact-model specification row: Height = 70.0 in | h Door Refrigerators | Smithfield | Elite Appliances and Cabinets | | | --- | | Width | 35.75 in. | | Height | 70 in. | | Length | Weight | Product Dimensions without Hinges or Handles | 35 3/4" W 68 7/8" H 34 5/8" D | | Product Dimensio

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied depth_case_only_in=29.5 in from RF31CG7200SR

Confidence label: medium.

Primary evidence

RF31CG7200SR
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same Samsung model with/without regional AA suffix; copied depth_case_only_in=29.5 in from RF31CG720
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied depth_case_only_in=29.5 in from RF31CG7200SR

Why this value was used

Same Samsung model with/without regional AA suffix; copied depth_case_only_in=29.5 in from RF31CG7200SR Calculation or inference: Same Samsung model with/without regional AA suffix; copied depth_case_only_in=29.5 in from RF31CG7200SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33.875 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied depth_less_handles_in=33.875 in from RF31CG7200SR

Confidence label: medium.

Primary evidence

RF31CG7200SR
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same Samsung model with/without regional AA suffix; copied depth_less_handles_in=33.875 in from RF31
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied depth_less_handles_in=33.875 in from RF31CG7200SR

Why this value was used

Same Samsung model with/without regional AA suffix; copied depth_less_handles_in=33.875 in from RF31CG7200SR Calculation or inference: Same Samsung model with/without regional AA suffix; copied depth_less_handles_in=33.875 in from RF31CG7200SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.25 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied depth_with_handles_in=36.25 in from RF31CG7200SR

Confidence label: medium.

Primary evidence

RF31CG7200SR
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same Samsung model with/without regional AA suffix; copied depth_with_handles_in=36.25 in from RF31C
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied depth_with_handles_in=36.25 in from RF31CG7200SR

Why this value was used

Same Samsung model with/without regional AA suffix; copied depth_with_handles_in=36.25 in from RF31CG7200SR Calculation or inference: Same Samsung model with/without regional AA suffix; copied depth_with_handles_in=36.25 in from RF31CG7200SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

48.5 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied depth_doors_open_90_in=48.5 in from RF31CG7200SR

Confidence label: medium.

Primary evidence

RF31CG7200SR
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same Samsung model with/without regional AA suffix; copied depth_doors_open_90_in=48.5 in from RF31C
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied depth_doors_open_90_in=48.5 in from RF31CG7200SR

Why this value was used

Same Samsung model with/without regional AA suffix; copied depth_doors_open_90_in=48.5 in from RF31CG7200SR Calculation or inference: Same Samsung model with/without regional AA suffix; copied depth_doors_open_90_in=48.5 in from RF31CG7200SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied min_cutout_width_in=36.5 in from RF31CG7200SR

Confidence label: medium.

Primary evidence

RF31CG7200SR
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same Samsung model with/without regional AA suffix; copied min_cutout_width_in=36.5 in from RF31CG72
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied min_cutout_width_in=36.5 in from RF31CG7200SR

Why this value was used

Same Samsung model with/without regional AA suffix; copied min_cutout_width_in=36.5 in from RF31CG7200SR Calculation or inference: Same Samsung model with/without regional AA suffix; copied min_cutout_width_in=36.5 in from RF31CG7200SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

[PDF] Bespoke 3-Door French Door Refrigerator (30 cu. ft.) with ... - NFM
www.nfm.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in.
Reviewed: 2026-09-05

Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 70.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

[PDF] 31 cu. ft. 4-Door French Door Refrigerator
images.thdstatic.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening depth derived from case-only depth 29.5 in plus propagated rear clearance 2.0 in.
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.5 in plus propagated rear clearance 2.0 in.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 31.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from RF31CG7400SRAA

Confidence label: medium.

Primary evidence

Samsung measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free identical-chassis propagation from Samsung RF31CG7400SRAA: side_ventilation_clearance_
Reviewed: 2026-09-05

Conflict-free identical-chassis propagation from Samsung RF31CG7400SRAA: side_ventilation_clearance_in=0.375 in.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 0.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from RF31CG7400SRAA

Confidence label: medium.

Primary evidence

Samsung measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free identical-chassis propagation from Samsung RF31CG7400SRAA: side_ventilation_clearance_
Reviewed: 2026-09-05

Conflict-free identical-chassis propagation from Samsung RF31CG7400SRAA: side_ventilation_clearance_in=0.375 in.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 0.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: shared Samsung model family; evidence donor RF30BB6600QLAA

Confidence label: medium.

Primary evidence

[PDF] Bespoke 3-Door French Door Refrigerator (30 cu. ft.) with ... - NFM
www.nfm.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung documented sibling/platform propagation from RF30BB6600QLAA: Cached exact-model result: Allo
Reviewed: 2026-09-05

Samsung documented sibling/platform propagation from RF30BB6600QLAA: Cached exact-model result: Allow a 3/8" minimum clearance at sides and top [cache: C:\Source Code\windsurf\Python\ExactFit\artifacts\refrigerator_tavily_installation_20260820\25b8d6637e032e701629d60c6376150e2e09c906493a7eafe90a57660bba9d92.json]

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 0.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Samsung RF31CG7200SR

Confidence label: medium.

Primary evidence

[PDF] 31 cu. ft. 4-Door French Door Refrigerator
images.thdstatic.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF31CG7200SR; original evi
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF31CG7200SR; original evidence: full-page adjudication=2.0; parser candidates=[2.0, 1.0]; 2" minimum clearance at rear

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 2 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from RF31CG7200SR

Confidence label: medium.

Primary evidence

RF31CG7200SR
images.thdstatic.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Conflict-free identical-chassis propagation from Samsung RF31CG7200SR: hinge_side_wall_clearance_in=2.5 in.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 2.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.75 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied case_width_in=35.75 in from RF31CG7200SR

Confidence label: medium.

Primary evidence

RF31CG7200SR
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same Samsung model with/without regional AA suffix; copied case_width_in=35.75 in from RF31CG7200SR
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied case_width_in=35.75 in from RF31CG7200SR

Why this value was used

Same Samsung model with/without regional AA suffix; copied case_width_in=35.75 in from RF31CG7200SR Calculation or inference: Same Samsung model with/without regional AA suffix; copied case_width_in=35.75 in from RF31CG7200SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

0.375 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied side_clearance_wall_in=0.375 in from RF31CG7200SR

Confidence label: medium.

Primary evidence

RF31CG7200SR
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same Samsung model with/without regional AA suffix; copied side_clearance_wall_in=0.375 in from RF31
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied side_clearance_wall_in=0.375 in from RF31CG7200SR

Why this value was used

Same Samsung model with/without regional AA suffix; copied side_clearance_wall_in=0.375 in from RF31CG7200SR Calculation or inference: Same Samsung model with/without regional AA suffix; copied side_clearance_wall_in=0.375 in from RF31CG7200SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.