Measurement evidence for Samsung RF29DB990012AA

Value used by ExactFit

35.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — bespoke-4-door-flex-refrigerator-29-cu-ft-with-ai-family-hub-and-ai-vision-inside-in-white-glass-sku-rf29db990012aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed exact-model cached label: Width = 35.875 in. Context: hout Hinge 70.75" Net Depth w/o Door
Reviewed: 2026-09-04

Reviewed exact-model cached label: Width = 35.875 in. Context: hout Hinge 70.75" Net Depth w/o Door Handle 34.25 " Depth without Door (in) 29 3/8" Width 35 7/8" Height 73" Height (decimal) 73 Width (decimal) 35.875 Depth (decimal) 34.25 Height (extra) \+ 2 inc

Why this value was used

Reviewed exact-model cached label: Width = 35.875 in. Context: hout Hinge 70.75" Net Depth w/o Door Handle 34.25 " Depth without Door (in) 29 3/8" Width 35 7/8" Height 73" Height (decimal) 73 Width (decimal) 35.875 Depth (decimal) 34.25 Height (extra) \+ 2 inc

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — bespoke-4-door-flex-refrigerator-29-cu-ft-with-ai-family-hub-and-ai-vision-inside-in-white-glass-sku-rf29db990012aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model Height without Hinge is 70.75 in; prior 70 in came from a sibling fit sheet.
Reviewed: 2026-09-04

Official exact-model Height without Hinge is 70.75 in; prior 70 in came from a sibling fit sheet.

Why this value was used

Official exact-model Height without Hinge is 70.75 in; prior 70 in came from a sibling fit sheet.

Other evidence found

• 70 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Official Samsung cached specification: height_case_in = 70.0 in; source_id=30041. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

73 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — bespoke-4-door-flex-refrigerator-29-cu-ft-with-ai-family-hub-and-ai-vision-inside-in-white-glass-sku-rf29db990012aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model page: Height with Hinge 73 in; prior value came from a sibling fit sheet.
Reviewed: 2026-09-04

Official exact-model page: Height with Hinge 73 in; prior value came from a sibling fit sheet.

Why this value was used

Official exact-model page: Height with Hinge 73 in; prior value came from a sibling fit sheet.

Other evidence found

• 70 in — superseded

  www.nfm.com; location not retained. Model scope: not separately recorded. Raw value: DOOR 341/ 4 " WIDTH (FITS 36" OPENING) 35 3/ 4 " HEIGHT WITH HINGE 70" Be sure your new fridge will fit Don't wait until. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.38 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — bespoke-4-door-flex-refrigerator-29-cu-ft-with-ai-family-hub-and-ai-vision-inside-in-white-glass-sku-rf29db990012aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without Door: 29.38 in | ith Hinge 73" Net Height without Hinge 70.75" Net Depth w/o Door Hand
Reviewed: 2026-09-04

Depth without Door: 29.38 in | ith Hinge 73" Net Height without Hinge 70.75" Net Depth w/o Door Handle 34.25 " Depth without Door (in) 29 3/8" Width 35 7/8" Height 73" Height (decimal) 73 Width (decimal) 35.875 Depth (deci

Why this value was used

Depth without Door: 29.38 in | ith Hinge 73" Net Height without Hinge 70.75" Net Depth w/o Door Handle 34.25 " Depth without Door (in) 29 3/8" Width 35 7/8" Height 73" Height (decimal) 73 Width (decimal) 35.875 Depth (deci

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — bespoke-4-door-flex-refrigerator-29-cu-ft-with-ai-family-hub-and-ai-vision-inside-in-white-glass-sku-rf29db990012aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth w/o Door Handle: 34.25 in | oor Handle 34.25" Net Height with Hinge 73" Net Height without Hin
Reviewed: 2026-09-04

Depth w/o Door Handle: 34.25 in | oor Handle 34.25" Net Height with Hinge 73" Net Height without Hinge 70.75" Net Depth w/o Door Handle 34.25 " Depth without Door (in) 29 3/8" Width 35 7/8" Height 73" Height (decimal) 73 Wi

Why this value was used

Depth w/o Door Handle: 34.25 in | oor Handle 34.25" Net Height with Hinge 73" Net Height without Hinge 70.75" Net Depth w/o Door Handle 34.25 " Depth without Door (in) 29 3/8" Width 35 7/8" Height 73" Height (decimal) 73 Wi

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — bespoke-4-door-flex-refrigerator-29-cu-ft-with-ai-family-hub-and-ai-vision-inside-in-white-glass-sku-rf29db990012aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with Door Handle: 34.25 in | (H) x 29 3/8" (D) Shipping Dimensions 38.25" (W) x 78.625" (H) x
Reviewed: 2026-09-04

Depth with Door Handle: 34.25 in | (H) x 29 3/8" (D) Shipping Dimensions 38.25" (W) x 78.625" (H) x 36.25" (D) Net Depth with Door Handle 34.25" Net Height with Hinge 73" Net Height without Hinge 70.75" Net Depth w/o Door Ha

Why this value was used

Depth with Door Handle: 34.25 in | (H) x 29 3/8" (D) Shipping Dimensions 38.25" (W) x 78.625" (H) x 36.25" (D) Net Depth with Door Handle 34.25" Net Height with Hinge 73" Net Height without Hinge 70.75" Net Depth w/o Door Ha

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

48.5 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Samsung platform-family propagation (RF29DB9) from RF29DB9900QDAA

Confidence label: medium.

Primary evidence

Samsung measurement source — french-door-beverage-center-29-cu-ft-stainless-steel-rf29db9600qlaa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Unanimous same-platform value 48.5 in from RF29DB9900QDAA; at least three populated dimensions match
Reviewed: 2026-09-04

Unanimous same-platform value 48.5 in from RF29DB9900QDAA; at least three populated dimensions match and none conflict. Donor evidence: Unanimous same-platform value 48.5 in from RF29DB9600QLAA; at least three populated dimensions match and none conflict. Donor evidence: Depth with doors open at 90º 48 1/2 inches

Why this value was used

Unanimous same-platform value 48.5 in from RF29DB9900QDAA; at least three populated dimensions match and none conflict. Donor evidence: Unanimous same-platform value 48.5 in from RF29DB9600QLAA; at least three populated dimensions match and none conflict. Donor evidence: Depth with doors open at 90º 48 1/2 inches Calculation or inference: Samsung platform-family propagation (RF29DB9) from RF29DB9900QDAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.875 + 2 * 0.375

Confidence label: medium.

Primary evidence

Samsung measurement source — bespoke-4-door-flex-refrigerator-29-cu-ft-with-ai-family-hub-and-ai-vision-inside-in-white-glass-sku-rf29db990012aa + side gap from the maker's document
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance
Reviewed: 2026-09-04

Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance on each side.

Why this value was used

Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 35.875 + 2 * 0.375.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

73.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — WillitFit_RF29DB9700.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 73 in appliance endpoint + 0.375 in clearance = 73.375 in.
Reviewed: 2026-09-05

Samsung installation envelope: 73 in appliance endpoint + 0.375 in clearance = 73.375 in.

Why this value was used

Samsung installation envelope: 73 in appliance endpoint + 0.375 in clearance = 73.375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.38 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — WillitFit_RF29DB9700.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 29.38 in appliance endpoint + 2 in clearance = 31.38 in.
Reviewed: 2026-09-05

Samsung installation envelope: 29.38 in appliance endpoint + 2 in clearance = 31.38 in.

Why this value was used

Samsung installation envelope: 29.38 in appliance endpoint + 2 in clearance = 31.38 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — WillitFit_RF29DB9700.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — WillitFit_RF29DB9700.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: shared Samsung model family; evidence donor RF29DB9900QDAA

Confidence label: medium.

Primary evidence

Samsung measurement source — WillitFit_RF29DB9700.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung documented sibling/platform propagation from RF29DB9900QDAA: Cached exact-model result: Allo
Reviewed: 2026-09-05

Samsung documented sibling/platform propagation from RF29DB9900QDAA: Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Why this value was used

Samsung documented sibling/platform propagation from RF29DB9900QDAA: Cached exact-model result: Allow a 3/8" minimum clearance at sides and top Calculation or inference: shared Samsung model family; evidence donor RF29DB9900QDAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: shared Samsung model family; evidence donor RF29DB9900QDAA

Confidence label: medium.

Primary evidence

Samsung measurement source — WillitFit_RF29DB9700.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung documented sibling/platform propagation from RF29DB9900QDAA: Cached exact-model result: Allo
Reviewed: 2026-09-05

Samsung documented sibling/platform propagation from RF29DB9900QDAA: Cached exact-model result: Allow 2" minimum clearance at rear

Why this value was used

Samsung documented sibling/platform propagation from RF29DB9900QDAA: Cached exact-model result: Allow 2" minimum clearance at rear Calculation or inference: shared Samsung model family; evidence donor RF29DB9900QDAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — WillitFit_RF29DB9700_2026-10-30.pdf
Samsung · Web source
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-30

Samsung Will-it-fit sheet "MODEL RF29DB9700 DIMENSIONS": "Allow 3.75" of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall." Sheet for RF29DB9700, the same fridge as RF29DB9900 (Samsung spec sheets for both print the identical dimension drawing). The largest door-swing clearance printed is stored (owner rule for clearances); the spec sheets' 2.5" is where the handle may touch the wall.

Why this value was used

Samsung Will-it-fit sheet "MODEL RF29DB9700 DIMENSIONS": "Allow 3.75" of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall." Sheet for RF29DB9700, the same fridge as RF29DB9900 (Samsung spec sheets for both print the identical dimension drawing). The largest door-swing clearance printed is stored (owner rule for clearances); the spec sheets' 2.5" is where the handle may touch the wall.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

11.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — RF29DB9900QD_2026-10-30.pdf
static.pcrichard.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-30

Samsung RF29DB9900 spec sheet, Dimensions top view: each door fully open at 125 degrees reaches 11 3/4" past the cabinet side (59" across both open doors). Stored as the printed door projection past the cabinet side (owner decision 2026-10-17).

Why this value was used

Samsung RF29DB9900 spec sheet, Dimensions top view: each door fully open at 125 degrees reaches 11 3/4" past the cabinet side (59" across both open doors). Stored as the printed door projection past the cabinet side (owner decision 2026-10-17).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.875 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in = width_doors_closed_in

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

Samsung measurement source — bespoke-4-door-flex-refrigerator-29-cu-ft-with-ai-family-hub-and-ai-vision-inside-in-white-glass-sku-rf29db990012aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same-appliance endpoint inference: case width equals exact stored closed width 35.875 in; manufactur
Reviewed: 2026-09-09

Same-appliance endpoint inference: case width equals exact stored closed width 35.875 in; manufacturer does not label a separate case-width endpoint.

Why this value was used

Same-appliance endpoint inference: case width equals exact stored closed width 35.875 in; manufacturer does not label a separate case-width endpoint. Calculation or inference: case_width_in = width_doors_closed_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.