Measurement evidence for Samsung RF29DB960012AA

Value used by ExactFit

35.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung RF29DB960012AA French Door Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Width = 35.875 in | without Hinge | 70.75" | | Net Depth w/o D
Reviewed: 2026-09-04

Plain exact-model specification row: Width = 35.875 in | without Hinge | 70.75" | | Net Depth w/o Door Handle | 34.25 " | | Depth without Door (in) | 24" | | Width | 35 7/8" | | Height | 73" | | Height (decimal) | 73 | [...] | | | --- | | Fridge-Side Convertible Compartment Capacity | 5.8 | |

Why this value was used

Plain exact-model specification row: Width = 35.875 in | without Hinge | 70.75" | | Net Depth w/o Door Handle | 34.25 " | | Depth without Door (in) | 24" | | Width | 35 7/8" | | Height | 73" | | Height (decimal) | 73 | [...] | | | --- | | Fridge-Side Convertible Compartment Capacity | 5.8 | |

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung RF29DB960012AA French Door Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height without Hinge = 70.75 in | | | Net Depth with Door Handle | 34.25" | | Net Height with Hinge
Reviewed: 2026-09-04

Height without Hinge = 70.75 in | | | Net Depth with Door Handle | 34.25" | | Net Height with Hinge | 73" | | Net Height without Hinge | 70.75" | | Net Depth w/o Door Handle | 34.25 " | | Depth without Door (in) | 24" | | W

Why this value was used

Height without Hinge = 70.75 in | | | Net Depth with Door Handle | 34.25" | | Net Height with Hinge | 73" | | Net Height without Hinge | 70.75" | | Net Depth w/o Door Handle | 34.25 " | | Depth without Door (in) | 24" | | W

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

73 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

[PDF] 29 cu. ft. BESPOKE 4-Door Flex™ - Samsung
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: TH D00R OPEN 90° 48 1/ 2" DEPTH TO DOOR 34 1/ 4 " HEIGHT WITH HINGE 73" HEIGHT WITHOUT HINGE 70 3/ 4
Reviewed: 2026-09-04

TH D00R OPEN 90° 48 1/ 2" DEPTH TO DOOR 34 1/ 4 " HEIGHT WITH HINGE 73" HEIGHT WITHOUT HINGE 70 3/ 4" WIDTH (FITS 36" OPE

Why this value was used

TH D00R OPEN 90° 48 1/ 2" DEPTH TO DOOR 34 1/ 4 " HEIGHT WITH HINGE 73" HEIGHT WITHOUT HINGE 70 3/ 4" WIDTH (FITS 36" OPE

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung RF29DB960012AA French Door Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without Door = 24.0 in | | Net Height without Hinge | 70.75" | | Net Depth w/o Door Handle | 3
Reviewed: 2026-09-04

Depth without Door = 24.0 in | | Net Height without Hinge | 70.75" | | Net Depth w/o Door Handle | 34.25 " | | Depth without Door (in) | 24" | | Width | 35 7/8" | | Height | 73" | | Height (decimal) | 73 | [...] | | | --

Why this value was used

Depth without Door = 24.0 in | | Net Height without Hinge | 70.75" | | Net Depth w/o Door Handle | 34.25 " | | Depth without Door (in) | 24" | | Width | 35 7/8" | | Height | 73" | | Height (decimal) | 73 | [...] | | | --

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung RF29DB960012AA French Door Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth w/o Door Handle = 34.25 in | " | | Net Height with Hinge | 73" | | Net Height without Hinge |
Reviewed: 2026-09-04

Depth w/o Door Handle = 34.25 in | " | | Net Height with Hinge | 73" | | Net Height without Hinge | 70.75" | | Net Depth w/o Door Handle | 34.25 " | | Depth without Door (in) | 24" | | Width | 35 7/8" | | Height | 73" | | Heig

Why this value was used

Depth w/o Door Handle = 34.25 in | " | | Net Height with Hinge | 73" | | Net Height without Hinge | 70.75" | | Net Depth w/o Door Handle | 34.25 " | | Depth without Door (in) | 24" | | Width | 35 7/8" | | Height | 73" | | Heig

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung RF29DB960012AA French Door Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with Door Handle = 34.25 in | /8" (D) | | Shipping Dimensions | 38.25" (W) x 78.625" (H) x 36.
Reviewed: 2026-09-04

Depth with Door Handle = 34.25 in | /8" (D) | | Shipping Dimensions | 38.25" (W) x 78.625" (H) x 36.25" (D) | | Net Depth with Door Handle | 34.25" | | Net Height with Hinge | 73" | | Net Height without Hinge | 70.75" | | Net D

Why this value was used

Depth with Door Handle = 34.25 in | /8" (D) | | Shipping Dimensions | 38.25" (W) x 78.625" (H) x 36.25" (D) | | Net Depth with Door Handle | 34.25" | | Net Height with Hinge | 73" | | Net Height without Hinge | 70.75" | | Net D

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Samsung platform-family propagation (RF29DB9) from RF29DB9900QDAA

Confidence label: medium.

Primary evidence

36" 29 cu.ft. Bespoke 4-Door Flex Refrigerator with Beverage Center | Samsung Canada
Samsung · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Unanimous same-platform value 48.5 in from RF29DB9900QDAA; at least three populated dimensions match
Reviewed: 2026-09-04

Unanimous same-platform value 48.5 in from RF29DB9900QDAA; at least three populated dimensions match and none conflict. Donor evidence: Unanimous same-platform value 48.5 in from RF29DB9600QLAA; at least three populated dimensions match and none conflict. Donor evidence: Depth with doors open at 90º 48 1/2 inches

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 48.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.875 + 2 * 0.375

Confidence label: medium.

Primary evidence

Samsung measurement source — https://appliancehomestore.com/refrigeration/refrigerators/french-door-refrigerators/rf29db960012aa + local-cache manufacturer-family consensus
appliancehomestore.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance
Reviewed: 2026-09-04

Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance on each side.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 36.625 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

73.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

29 cu. ft. French Door
Samsung · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 73 in appliance endpoint + 0.375 in clearance = 73.375 in.
Reviewed: 2026-09-05

Samsung installation envelope: 73 in appliance endpoint + 0.375 in clearance = 73.375 in.

Why this value was used

Samsung installation envelope: 73 in appliance endpoint + 0.375 in clearance = 73.375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — https://www.canadianappliance.ca/pdf/samsung/refrigerator/RF29DB9600QLAA_specification-sheet.pdf
www.canadianappliance.ca · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 24 in appliance endpoint + 2 in clearance = 26 in.
Reviewed: 2026-09-05

Samsung installation envelope: 24 in appliance endpoint + 2 in clearance = 26 in.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 26 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pa
Reviewed: 2026-09-05

Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pa
Reviewed: 2026-09-05

Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

29 cu. ft. French Door
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cached exact-model result: Allow a 3/8" minimum clearance at sides and top [cache: C:\Source Code\wi
Reviewed: 2026-09-05

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top [cache: C:\Source Code\windsurf\Python\ExactFit\artifacts\refrigerator_tavily_installation_20260820\8b1f76b2951a19eded0f99b521215174b6e48ee4b8ae6fe6b932d85bb99aaaf7.json]

Why this value was used

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top [cache: C:\Source Code\windsurf\Python\ExactFit\artifacts\refrigerator_tavily_installation_20260820\8b1f76b2951a19eded0f99b521215174b6e48ee4b8ae6fe6b932d85bb99aaaf7.json]

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: shared Samsung model family; evidence donor RF29DB9600QLAA

Confidence label: medium.

Primary evidence

Samsung measurement source — https://www.canadianappliance.ca/pdf/samsung/refrigerator/RF29DB9600QLAA_specification-sheet.pdf
www.canadianappliance.ca · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung documented sibling/platform propagation from RF29DB9600QLAA: 2” minimum clearance at rear
Reviewed: 2026-09-05

Samsung documented sibling/platform propagation from RF29DB9600QLAA: 2” minimum clearance at rear

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 2 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: shared Samsung model family; evidence donor RF29DB9600QLAA

Confidence label: medium.

Primary evidence

Samsung measurement source — https://www.canadianappliance.ca/pdf/samsung/refrigerator/RF29DB9600QLAA_specification-sheet.pdf
www.canadianappliance.ca · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Samsung documented sibling/platform propagation from RF29DB9600QLAA: 2. Refer to illustration below to determine dimensions. | 3. Allow 11 3/4" of clearance on hinge side of refrigerator when installing | next to a wall.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 11.75 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in mapped from populated width_doors_closed_in; doors do not materially change closed product width

Confidence label: low.

Primary evidence

Samsung RF29DB960012AA French Door Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Low-confidence same-appliance width mapping: case_width_in=35.875 in from width_doors_closed_in.
Reviewed: 2026-09-04

Low-confidence same-appliance width mapping: case_width_in=35.875 in from width_doors_closed_in.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 35.875 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Strong modal installation clearance for this manufacturer family

Confidence label: low.

Primary evidence

Samsung measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pa
Reviewed: 2026-09-04

Inferred 0.375 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.