Measurement evidence for Samsung RF29BB890012AA

Value used by ExactFit

35.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rf29bb890012aa
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Width = 35.75 in | Dimensions | 38 1/4" (W) x 75 3/4" (H) x 36
Reviewed: 2026-09-04

Plain exact-model specification row: Width = 35.75 in | Dimensions | 38 1/4" (W) x 75 3/4" (H) x 36 1/4" (D) | [...] | Depth without Door (in) | 29 3/8" | | Width | 35 3/4" | | Height | 70" | | Height (decimal) | 70 | | Width (decimal) | 35.75 | | Depth (decimal) | 34.25 | | Product Dimensio

Why this value was used

Plain exact-model specification row: Width = 35.75 in | Dimensions | 38 1/4" (W) x 75 3/4" (H) x 36 1/4" (D) | [...] | Depth without Door (in) | 29 3/8" | | Width | 35 3/4" | | Height | 70" | | Height (decimal) | 70 | | Width (decimal) | 35.75 | | Depth (decimal) | 34.25 | | Product Dimensio

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rf29bb890012aa
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height without Hinge = 68.875 in | | | Net Depth with Door Handle | 28.75" | | Net Height with Hinge
Reviewed: 2026-09-04

Height without Hinge = 68.875 in | | | Net Depth with Door Handle | 28.75" | | Net Height with Hinge | 70" | | Net Height without Hinge | 68 7/8" | | Net Depth w/o Door Handle | 34 1/4" | [...] | | | --- | | Width | 35.75 in.

Why this value was used

Height without Hinge = 68.875 in | | | Net Depth with Door Handle | 28.75" | | Net Height with Hinge | 70" | | Net Height without Hinge | 68 7/8" | | Net Depth w/o Door Handle | 34 1/4" | [...] | | | --- | | Width | 35.75 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — WillitFit_RF23BB8900_V2.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: DOOR 283/ 4 " WIDTH (FITS 36" OPENING) 35 3/ 4 " HEIGHT WITH HINGE 70" Be sure your new fridge will
Reviewed: 2026-09-04

DOOR 283/ 4 " WIDTH (FITS 36" OPENING) 35 3/ 4 " HEIGHT WITH HINGE 70" Be sure your new fridge will fit Don't wait until

Why this value was used

DOOR 283/ 4 " WIDTH (FITS 36" OPENING) 35 3/ 4 " HEIGHT WITH HINGE 70" Be sure your new fridge will fit Don't wait until

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 106163478.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 20
Reviewed: 2026-10-13

Installation table, callout 05 (cabinet depth): RF23BB8***** 24" (610 mm), RF29BB8***** 29 3/8" (748 mm). The stored 24 in came from the RF23BB8900 fit guide, a different model.

Why this value was used

Installation table, callout 05 (cabinet depth): RF23BB8***** 24" (610 mm), RF29BB8***** 29 3/8" (748 mm). The stored 24 in came from the RF23BB8900 fit guide, a different model.

Other evidence found

• 24 in — superseded

  image-us.samsung.com; location not retained. Model scope: not separately recorded. Raw value: 23 cu. ft. 4-Door French Door Refrigerator A B D DEPTH WITHOUT DOOR 24 " DEPTH TO DOOR 283/ 4 " WIDTH (FITS 36" OPENING) 3. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rf29bb890012aa
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth w/o Door Handle = 34.25 in | | | Net Height with Hinge | 70" | | Net Height without Hinge | 6
Reviewed: 2026-09-04

Depth w/o Door Handle = 34.25 in | | | Net Height with Hinge | 70" | | Net Height without Hinge | 68 7/8" | | Net Depth w/o Door Handle | 34 1/4" | [...] | | | --- | | Width | 35.75 in. | | Height | 70 in. | | Length | 34 in.

Why this value was used

Depth w/o Door Handle = 34.25 in | | | Net Height with Hinge | 70" | | Net Height without Hinge | 68 7/8" | | Net Depth w/o Door Handle | 34 1/4" | [...] | | | --- | | Width | 35.75 in. | | Height | 70 in. | | Length | 34 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rf29bb890012aa
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Depth = 34.25 in | te Glass | | General Feature | 4 Door French
Reviewed: 2026-09-04

Plain exact-model specification row: Depth = 34.25 in | te Glass | | General Feature | 4 Door French Door | | Free Standing | Yes | | Number of Doors | 4 | | Depth | 34 1/4" | Refrigerator Features | | | | --- | --- | | AutoFill Water Pitcher | Yes | | Gallon Bins | Yes | | Gallon Door Bins |

Why this value was used

Plain exact-model specification row: Depth = 34.25 in | te Glass | | General Feature | 4 Door French Door | | Free Standing | Yes | | Number of Doors | 4 | | Depth | 34 1/4" | Refrigerator Features | | | | --- | --- | | AutoFill Water Pitcher | Yes | | Gallon Bins | Yes | | Gallon Door Bins |

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

48.5 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same RF29BB chassis as RF29BB860012AA/RF29BB86004MAA

Confidence label: medium.

Primary evidence

Samsung measurement source — documents for other models on the same chassis
www.shopappliances.com · Web source
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Matching RF29BB siblings report 48.5 in open-door depth.
Reviewed: 2026-09-04

Matching RF29BB siblings report 48.5 in open-door depth.

Why this value was used

Matching RF29BB siblings report 48.5 in open-door depth. Calculation or inference: same RF29BB chassis as RF29BB860012AA/RF29BB86004MAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.75 + 2 * 0.375

Confidence label: medium.

Primary evidence

Samsung measurement source — rf29bb890012aa + side gap from the maker's document
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on
Reviewed: 2026-09-04

Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on each side.

Why this value was used

Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 35.75 + 2 * 0.375.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — 62058011-manufacturer's-brochure.pdf
www.nfm.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 70.0 in plus propagated top clearance
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 70.0 in plus propagated top clearance 0.375 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 70.0 in plus propagated top clearance 0.375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — RF29BB8200APAA-specs.pdf
assets.coastappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Recalculated 2026-10-13 with the stored formula from current inputs: depth_case_only_in + rear_clear
Reviewed: 2026-10-13

Recalculated 2026-10-13 with the stored formula from current inputs: depth_case_only_in + rear_clearance_in with depth_case_only_in = 29.375, rear_clearance_in = 2 = 31.375 in (previously 26 in).

Why this value was used

Recalculated 2026-10-13 with the stored formula from current inputs: depth_case_only_in + rear_clearance_in with depth_case_only_in = 29.375, rear_clearance_in = 2 = 31.375 in (previously 26 in). Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — RF29BB8200APAA-specs.pdf
assets.coastappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — RF29BB8200APAA-specs.pdf
assets.coastappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Samsung RF29BB8200QLAA

Confidence label: medium.

Primary evidence

Samsung measurement source — 62058011-manufacturer's-brochure.pdf
www.nfm.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF29BB8200QLAA; original e
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF29BB8200QLAA; original evidence: Exact-model cached Samsung clearance statement: top_clearance_in=0.375 in; 1 copy/copies, 1 domain(s), official=False; no contrary parsed value.

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF29BB8200QLAA; original evidence: Exact-model cached Samsung clearance statement: top_clearance_in=0.375 in; 1 copy/copies, 1 domain(s), official=False; no contrary parsed value. Calculation or inference: exact 8-dimension chassis signature; source model Samsung RF29BB8200QLAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Samsung RF29BB8200QLAA

Confidence label: medium.

Primary evidence

Samsung measurement source — RF29BB8200APAA-specs.pdf
assets.coastappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF29BB8200QLAA; original e
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF29BB8200QLAA; original evidence: 2” minimum clearance at rear

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF29BB8200QLAA; original evidence: 2” minimum clearance at rear Calculation or inference: exact 8-dimension chassis signature; source model Samsung RF29BB8200QLAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.5 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 62056981-manufacturer's-brochure.pdf
www.nfm.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same Samsung base model as RF29BB89008MAA (identical stored dimensions; Samsung's sheets are written
Reviewed: 2026-10-25

Same Samsung base model as RF29BB89008MAA (identical stored dimensions; Samsung's sheets are written per base model). Sibling evidence: Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). Allow 2.5" of clearance on hinge side

Why this value was used

Same Samsung base model as RF29BB89008MAA (identical stored dimensions; Samsung's sheets are written per base model). Sibling evidence: Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). Allow 2.5" of clearance on hinge side Calculation or inference: agent blind extraction visually confirmed.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.75 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in = width_doors_closed_in

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

Samsung measurement source — rf29bb890012aa
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same-appliance endpoint inference: case width equals exact stored closed width 35.75 in; manufacture
Reviewed: 2026-09-09

Same-appliance endpoint inference: case width equals exact stored closed width 35.75 in; manufacturer does not label a separate case-width endpoint.

Why this value was used

Same-appliance endpoint inference: case width equals exact stored closed width 35.75 in; manufacturer does not label a separate case-width endpoint. Calculation or inference: case_width_in = width_doors_closed_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.