Measurement evidence for Samsung RF27CG5010S9AA

Value used by ExactFit

35.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied width_doors_closed_in=35.75 in from RF27CG5010S9

Confidence label: medium.

Primary evidence

Samsung measurement source — 774804_en.pdf
media.datatail.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied width_doors_closed_in=35.75 in from RF27CG5010S9

Why this value was used

Same Samsung model with/without regional AA suffix; copied width_doors_closed_in=35.75 in from RF27CG5010S9 Calculation or inference: Same Samsung model with/without regional AA suffix; copied width_doors_closed_in=35.75 in from RF27CG5010S9.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied height_case_in=68.875 in from RF27CG5010S9

Confidence label: medium.

Primary evidence

Samsung measurement source — 774804_en.pdf
media.datatail.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied height_case_in=68.875 in from RF27CG5010S9

Why this value was used

Same Samsung model with/without regional AA suffix; copied height_case_in=68.875 in from RF27CG5010S9 Calculation or inference: Same Samsung model with/without regional AA suffix; copied height_case_in=68.875 in from RF27CG5010S9.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied height_hinge_in=70.0 in from RF27CG5010S9

Confidence label: medium.

Primary evidence

Samsung measurement source — 935f66ed-63f6-4e6f-96db-51627d321cd7.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same Samsung model with/without regional AA suffix; copied height_hinge_in=70.0 in from RF27CG5010S9
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied height_hinge_in=70.0 in from RF27CG5010S9

Why this value was used

Same Samsung model with/without regional AA suffix; copied height_hinge_in=70.0 in from RF27CG5010S9 Calculation or inference: Same Samsung model with/without regional AA suffix; copied height_hinge_in=70.0 in from RF27CG5010S9.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied depth_case_only_in=25.0 in from RF27CG5010S9

Confidence label: medium.

Primary evidence

Samsung measurement source — 935f66ed-63f6-4e6f-96db-51627d321cd7.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same Samsung model with/without regional AA suffix; copied depth_case_only_in=25.0 in from RF27CG501
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied depth_case_only_in=25.0 in from RF27CG5010S9

Why this value was used

Same Samsung model with/without regional AA suffix; copied depth_case_only_in=25.0 in from RF27CG5010S9 Calculation or inference: Same Samsung model with/without regional AA suffix; copied depth_case_only_in=25.0 in from RF27CG5010S9.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.5 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied depth_less_handles_in=29.5 in from RF27CG5010S9

Confidence label: medium.

Primary evidence

Samsung measurement source — 774804_en.pdf
media.datatail.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied depth_less_handles_in=29.5 in from RF27CG5010S9

Why this value was used

Same Samsung model with/without regional AA suffix; copied depth_less_handles_in=29.5 in from RF27CG5010S9 Calculation or inference: Same Samsung model with/without regional AA suffix; copied depth_less_handles_in=29.5 in from RF27CG5010S9.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — samsung-36-inch-27-cu-ft-french-3-door-refrigerator-rf27cg5010s9aa
www.merlinstv.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: .81 cm Height (With Hinge) 70 inch(es) / 177.8 cm Depth (With Handles) 29.5 inch(es) / 74.93 cm Weig
Reviewed: 2026-09-04

.81 cm Height (With Hinge) 70 inch(es) / 177.8 cm Depth (With Handles) 29.5 inch(es) / 74.93 cm Weight 281.99 lb(s) / 127.91 kg

Why this value was used

.81 cm Height (With Hinge) 70 inch(es) / 177.8 cm Depth (With Handles) 29.5 inch(es) / 74.93 cm Weight 281.99 lb(s) / 127.91 kg

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

44 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied depth_doors_open_90_in=44.0 in from RF27CG5010S9

Confidence label: medium.

Primary evidence

Samsung measurement source — 327781437
www.homedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same Samsung model with/without regional AA suffix; copied depth_doors_open_90_in=44.0 in from RF27C
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied depth_doors_open_90_in=44.0 in from RF27CG5010S9

Why this value was used

Same Samsung model with/without regional AA suffix; copied depth_doors_open_90_in=44.0 in from RF27CG5010S9 Calculation or inference: Same Samsung model with/without regional AA suffix; copied depth_doors_open_90_in=44.0 in from RF27CG5010S9.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 774804_en.pdf
media.datatail.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-31

Samsung RF27CG5010S9 dimension sheet: "WIDTH (FITS 36" OPENING)". RF27CG5010S9AA is the same model with the regional AA suffix, so this is the printed figure, not a calculation.

Why this value was used

Samsung RF27CG5010S9 dimension sheet: "WIDTH (FITS 36" OPENING)". RF27CG5010S9AA is the same model with the regional AA suffix, so this is the printed figure, not a calculation.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — 2023_RF27CG5100_CD_V3.pdf
Samsung · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in.
Reviewed: 2026-09-05

Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in.

Why this value was used

Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

27 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — ec3fe58be900341205deca677b372e032c7f82453d8a60566b8c4092dc8e1606.pdf
Samsung · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 25.0 in plus propagated rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 25.0 in plus propagated rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — 2023_RF27CG5100_CD_V3.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top for ease of installation."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top for ease of installation."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — 2023_RF27CG5100_CD_V3.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top for ease of installation."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top for ease of installation."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: shared Samsung model family; evidence donor RF27CG5100SR

Confidence label: medium.

Primary evidence

Samsung measurement source — 2023_RF27CG5100_CD_V3.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung documented sibling/platform propagation from RF27CG5100SR: Exact-model cached Samsung cleara
Reviewed: 2026-09-05

Samsung documented sibling/platform propagation from RF27CG5100SR: Exact-model cached Samsung clearance statement: top_clearance_in=0.375 in; 3 copy/copies, 2 domain(s), official=True; no contrary parsed value.

Why this value was used

Samsung documented sibling/platform propagation from RF27CG5100SR: Exact-model cached Samsung clearance statement: top_clearance_in=0.375 in; 3 copy/copies, 2 domain(s), official=True; no contrary parsed value. Calculation or inference: shared Samsung model family; evidence donor RF27CG5100SR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Samsung RF27CG5010S9

Confidence label: medium.

Primary evidence

Samsung measurement source — ec3fe58be900341205deca677b372e032c7f82453d8a60566b8c4092dc8e1606.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF27CG5010S9; original evidence: 2" minimum clearance at rear

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF27CG5010S9; original evidence: 2" minimum clearance at rear Calculation or inference: exact 8-dimension chassis signature; source model Samsung RF27CG5010S9.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 105583948.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 22
Reviewed: 2026-10-03

When you install the refrigerator next to a fixed wall, you must provide a minimum clearance of 3 3/4 in (95 mm) from the wall to allow the door to swing open. The largest door-swing clearance printed for this model is stored (owner rule for clearances); the spec sheets' 2.5 in is where the handle may touch the wall.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

When you install the refrigerator next to a fixed wall, you must provide a minimum clearance of 3 3/4 in (95 mm) from the wall to allow the door to swing open. The largest door-swing clearance printed for this model is stored (owner rule for clearances); the spec sheets' 2.5 in is where the handle may touch the wall.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.75 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Same Samsung model with/without regional AA suffix; copied case_width_in=35.75 in from RF27CG5010S9

Confidence label: medium.

Primary evidence

Samsung measurement source — 774804_en.pdf
media.datatail.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Same Samsung model with/without regional AA suffix; copied case_width_in=35.75 in from RF27CG5010S9

Why this value was used

Same Samsung model with/without regional AA suffix; copied case_width_in=35.75 in from RF27CG5010S9 Calculation or inference: Same Samsung model with/without regional AA suffix; copied case_width_in=35.75 in from RF27CG5010S9.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.