Measurement evidence for Samsung RF25C5551SRAA

Value used by ExactFit

32.19 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — rf5000c-24-5-cu-ft-silver-rf25c5551sr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Net Width: 32.19 in | n (WxHxD) 32.2 x 70.0 x 33.3 inch - Net Dimension (WxHxD) 820 x 1778 x 846 mm
Reviewed: 2026-09-04

Net Width: 32.19 in | n (WxHxD) 32.2 x 70.0 x 33.3 inch - Net Dimension (WxHxD) 820 x 1778 x 846 mm - Net Width (inch) 32.1875 inch - Net Case Height with Hinge 70 inch - Net Case Height without Hinge 68.875 i

Why this value was used

Net Width: 32.19 in | n (WxHxD) 32.2 x 70.0 x 33.3 inch - Net Dimension (WxHxD) 820 x 1778 x 846 mm - Net Width (inch) 32.1875 inch - Net Case Height with Hinge 70 inch - Net Case Height without Hinge 68.875 i

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rf5000c-24-5-cu-ft-silver-rf25c5551sr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official cached exact-model specification: Net Case Height without Hinge 68.875 in.
Reviewed: 2026-09-04

Official cached exact-model specification: Net Case Height without Hinge 68.875 in.

Why this value was used

Official cached exact-model specification: Net Case Height without Hinge 68.875 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — rf5000c-24-5-cu-ft-silver-rf25c5551sr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height with Hinge: 70.0 in | et Dimension (WxHxD) 820 x 1778 x 846 mm Net Width (inch) 32.1875 inch
Reviewed: 2026-09-04

Height with Hinge: 70.0 in | et Dimension (WxHxD) 820 x 1778 x 846 mm Net Width (inch) 32.1875 inch Net Case Height with Hinge 70 inch Net Case Height without Hinge 68.875 inch Net Depth with Door Handle 33.3125

Why this value was used

Height with Hinge: 70.0 in | et Dimension (WxHxD) 820 x 1778 x 846 mm Net Width (inch) 32.1875 inch Net Case Height with Hinge 70 inch Net Case Height without Hinge 68.875 inch Net Depth with Door Handle 33.3125

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — rf5000c-24-5-cu-ft-silver-rf25c5551sr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without Door = 29.75 in | ith Door Handle 33.3125 inch - Net Depth without Door Handle 33.3125
Reviewed: 2026-09-04

Depth without Door = 29.75 in | ith Door Handle 33.3125 inch - Net Depth without Door Handle 33.3125 inch - Net Depth without Door 29.75 inch - Packing Dimension (WxHxD) 32 5/8" x 73 1/2" x 35" - Net Weight (kg) 114 kg | cached support: samsung.com

Why this value was used

Depth without Door = 29.75 in | ith Door Handle 33.3125 inch - Net Depth without Door Handle 33.3125 inch - Net Depth without Door 29.75 inch - Packing Dimension (WxHxD) 32 5/8" x 73 1/2" x 35" - Net Weight (kg) 114 kg | cached support: samsung.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33.3125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rf5000c-24-5-cu-ft-silver-rf25c5551sr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official cached exact-model specification: Net Depth without Door Handle 33.3125 in.
Reviewed: 2026-09-04

Official cached exact-model specification: Net Depth without Door Handle 33.3125 in.

Why this value was used

Official cached exact-model specification: Net Depth without Door Handle 33.3125 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.3125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — rf5000c-24-5-cu-ft-silver-rf25c5551sr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model specification prints Net Depth with Door Handle = 33 5/16 in (33.3125).
Reviewed: 2026-09-09

Official exact-model specification prints Net Depth with Door Handle = 33 5/16 in (33.3125).

Why this value was used

Official exact-model specification prints Net Depth with Door Handle = 33 5/16 in (33.3125).

Other evidence found

• 33.31 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Depth with Door Handle: 33.31 in | ase Height with Hinge 70 inch - Net Case Height without Hinge 68.875 inch - Net Depth with Door Handle 33.3125 inch - Net Depth without Door Handle 33.3125 inch - Net Depth without Door 29.75 i. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

46.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — rf5000c-24-5-cu-ft-silver-rf25c5551sr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model cached page: total depth with refrigerator door opened to 90 degrees is 46 3/4
Reviewed: 2026-09-04

Official exact-model cached page: total depth with refrigerator door opened to 90 degrees is 46 3/4 in.

Why this value was used

Official exact-model cached page: total depth with refrigerator door opened to 90 degrees is 46 3/4 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.94 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 32.19 + 2 * 0.375

Confidence label: medium.

Primary evidence

Samsung measurement source — rf5000c-24-5-cu-ft-silver-rf25c5551sr-aa + side gap from the maker's document
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 32.94 in from product width 32.19 in and explicit 0.375 in clearance o
Reviewed: 2026-09-04

Derived minimum opening width 32.94 in from product width 32.19 in and explicit 0.375 in clearance on each side.

Why this value was used

Derived minimum opening width 32.94 in from product width 32.19 in and explicit 0.375 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 32.19 + 2 * 0.375.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — samsung-rf27t5501s-product-guide.pdf
s1.img-b.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in.
Reviewed: 2026-09-05

Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in.

Why this value was used

Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — RF25C5551SR-specs.pdf
assets.coastappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 29.75 in appliance endpoint + 2 in clearance = 31.75 in.
Reviewed: 2026-09-05

Samsung installation envelope: 29.75 in appliance endpoint + 2 in clearance = 31.75 in.

Why this value was used

Samsung installation envelope: 29.75 in appliance endpoint + 2 in clearance = 31.75 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — samsung-rf27t5501s-product-guide.pdf
s1.img-b.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — samsung-rf27t5501s-product-guide.pdf
s1.img-b.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: shared Samsung model family; evidence donor RF25C5A01SRAA

Confidence label: medium.

Primary evidence

Samsung measurement source — samsung-rf27t5501s-product-guide.pdf
s1.img-b.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung documented sibling/platform propagation from RF25C5A01SRAA: Cached exact-model result: Allow
Reviewed: 2026-09-05

Samsung documented sibling/platform propagation from RF25C5A01SRAA: Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Why this value was used

Samsung documented sibling/platform propagation from RF25C5A01SRAA: Cached exact-model result: Allow a 3/8" minimum clearance at sides and top Calculation or inference: shared Samsung model family; evidence donor RF25C5A01SRAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — RF25C5551SR-specs.pdf
assets.coastappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cached exact-model result: Allow 2" minimum clearance at rear
Reviewed: 2026-09-05

Cached exact-model result: Allow 2" minimum clearance at rear

Why this value was used

Cached exact-model result: Allow 2" minimum clearance at rear

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

Samsung measurement source — 105583933.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 20
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). minimum clearance of 3 3/4" (95 mm) from the wall

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). minimum clearance of 3 3/4" (95 mm) from the wall

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

5.25 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 105583933.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 21
Reviewed: 2026-10-14

5 1/4 in printed for doors fully open to the printed 135 degrees. Read by the verification agent (run D91ab4ff9fb) from a document naming the model.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

5 1/4 in printed for doors fully open to the printed 135 degrees. Read by the verification agent (run D91ab4ff9fb) from a document naming the model.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Samsung Net Width mapped to cabinet/case width

Confidence label: medium.

Primary evidence

Samsung measurement source — rf5000c-24-5-cu-ft-silver-rf25c5551sr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official Samsung cached specification: case_width_in = 32.0 in; source_id=4912
Reviewed: 2026-09-04

Official Samsung cached specification: case_width_in = 32.0 in; source_id=4912

Why this value was used

Official Samsung cached specification: case_width_in = 32.0 in; source_id=4912 Calculation or inference: Samsung Net Width mapped to cabinet/case width.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.