Measurement evidence for Samsung RF24BB69006MAA

Value used by ExactFit

35.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rf24bb69006maa
amdirectappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Width = 35.75 in | igerator 24 Cu Ft With Top Left And Family H
Reviewed: 2026-09-04

Plain exact-model specification row: Width = 35.75 in | igerator 24 Cu Ft With Top Left And Family HubIn White Glass And Matte Grey Glass Bottom Door Panel ; Width, 35.75 in. ; Height, 70

Why this value was used

Plain exact-model specification row: Width = 35.75 in | igerator 24 Cu Ft With Top Left And Family HubIn White Glass And Matte Grey Glass Bottom Door Panel ; Width, 35.75 in. ; Height, 70

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rf24bb69006maa
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height without Hinge = 68.875 in | 38 1/4" (W) x 76 3/4" (H) x 30 5/8" (D) | | Net Height with Hinge
Reviewed: 2026-09-04

Height without Hinge = 68.875 in | 38 1/4" (W) x 76 3/4" (H) x 30 5/8" (D) | | Net Height with Hinge | 70" | | Net Height without Hinge | 68 7/8" | | Depth without Door (in) | 24" | | Product Dimensions with Hinges, Handles a

Why this value was used

Height without Hinge = 68.875 in | 38 1/4" (W) x 76 3/4" (H) x 30 5/8" (D) | | Net Height with Hinge | 70" | | Net Height without Hinge | 68 7/8" | | Depth without Door (in) | 24" | | Product Dimensions with Hinges, Handles a

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — WillitFit_RF24BB6600+RF24BB6200_Counter.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: DOOR 283/ 4 " WIDTH (FITS 36" OPENING) 35 3/ 4 " HEIGHT WITH HINGE 70" Be sure your new fridge will
Reviewed: 2026-09-04

DOOR 283/ 4 " WIDTH (FITS 36" OPENING) 35 3/ 4 " HEIGHT WITH HINGE 70" Be sure your new fridge will fit Don't wait until

Why this value was used

DOOR 283/ 4 " WIDTH (FITS 36" OPENING) 35 3/ 4 " HEIGHT WITH HINGE 70" Be sure your new fridge will fit Don't wait until

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — WillitFit_RF24BB6600+RF24BB6200_Counter.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: smaller than the width of the narrowest opening. DEPTH WITHOUT DOOR 24 " 24 cu. ft. 3-Door French Do
Reviewed: 2026-09-04

smaller than the width of the narrowest opening. DEPTH WITHOUT DOOR 24 " 24 cu. ft. 3-Door French Door Refrigerator MODEL

Why this value was used

smaller than the width of the narrowest opening. DEPTH WITHOUT DOOR 24 " 24 cu. ft. 3-Door French Door Refrigerator MODEL

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.75 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Samsung platform-family propagation (RF24BB6) from RF24BB6200QLAA, RF24BB6600QLAA

Confidence label: medium.

Primary evidence

Samsung measurement source — rf24bb6200qlaa
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Unanimous same-platform value 28.75 in from RF24BB6200QLAA, RF24BB6600QLAA; at least three populated
Reviewed: 2026-09-04

Unanimous same-platform value 28.75 in from RF24BB6200QLAA, RF24BB6600QLAA; at least three populated dimensions match and none conflict. Donor evidence: Depth w/o Door Handle = 28.75 in | | | Net Height with Hinge | 70" | | Net Height without Hinge | 68 7/8" | | Net Depth w/o Door Handle | 28 3/4" | | Depth without Door (in) | 24" | | Width | 35 3/4" | | Height | 70" | [...] | cached support: appliancehomestore.com, homery.com

Why this value was used

Unanimous same-platform value 28.75 in from RF24BB6200QLAA, RF24BB6600QLAA; at least three populated dimensions match and none conflict. Donor evidence: Depth w/o Door Handle = 28.75 in | | | Net Height with Hinge | 70" | | Net Height without Hinge | 68 7/8" | | Net Depth w/o Door Handle | 28 3/4" | | Depth without Door (in) | 24" | | Width | 35 3/4" | | Height | 70" | [...] | cached support: appliancehomestore.com, homery.com Calculation or inference: Samsung platform-family propagation (RF24BB6) from RF24BB6200QLAA, RF24BB6600QLAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28.75 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Samsung platform-family propagation (RF24BB6) from RF24BB6200QLAA, RF24BB6600QLAA

Confidence label: medium.

Primary evidence

Samsung measurement source — bespoke-4-door-french-door-refrigerator-23-cu-ft-with-beverage-center-in-white-glass-sku-rf23bb860012aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Unanimous same-platform value 28.75 in from RF24BB6200QLAA, RF24BB6600QLAA; at least three populated
Reviewed: 2026-09-04

Unanimous same-platform value 28.75 in from RF24BB6200QLAA, RF24BB6600QLAA; at least three populated dimensions match and none conflict. Donor evidence: Medium-confidence chassis inference from RF23BB860012AA, RF23BB86004MAA, RF23BB8600QLAA, RF23BB890012AA, RF23BB89008MAA, RF24BB6600QLAA, RF70F23DER, RF90F23AECEAA. Donors unanimously report depth_with_handles_in=28.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: width_doors_closed_in, height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in. Donor evidence: Depth with Door Handle: 28.75 in | sions without Hinges and Door 35 6/8" x 68 7/8" x 24" Width (decimal) 35.75 Net Depth with Door Handle 28 6/8" Product Dimensions with Door without Handles 35 3/4" (W) x 70" (H) x 28 3/4" (D

Why this value was used

Unanimous same-platform value 28.75 in from RF24BB6200QLAA, RF24BB6600QLAA; at least three populated dimensions match and none conflict. Donor evidence: Medium-confidence chassis inference from RF23BB860012AA, RF23BB86004MAA, RF23BB8600QLAA, RF23BB890012AA, RF23BB89008MAA, RF24BB6600QLAA, RF70F23DER, RF90F23AECEAA. Donors unanimously report depth_with_handles_in=28.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: width_doors_closed_in, height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in. Donor evidence: Depth with Door Handle: 28.75 in | sions without Hinges and Door 35 6/8" x 68 7/8" x 24" Width (decimal) 35.75 Net Depth with Door Handle 28 6/8" Product Dimensions with Door without Handles 35 3/4" (W) x 70" (H) x 28 3/4" (D Calculation or inference: Samsung platform-family propagation (RF24BB6) from RF24BB6200QLAA, RF24BB6600QLAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

43 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from RF24BB6200QLAA, RF24BB6600QLAA, RF70F23DER

Confidence label: medium.

Primary evidence

Samsung measurement source — samsung-rf24bb6200qlaa
www.homery.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Medium-confidence chassis inference from RF24BB6200QLAA, RF24BB6600QLAA, RF70F23DER. Donors unanimou
Reviewed: 2026-09-04

Medium-confidence chassis inference from RF24BB6200QLAA, RF24BB6600QLAA, RF70F23DER. Donors unanimously report depth_doors_open_90_in=43.0 in; at least four direct chassis dimensions match and none conflict. Matching fields: width_doors_closed_in, height_case_in, height_hinge_in, depth_case_only_in. Donor evidence: Depth With Door Opened At 90 Degrees = 43.0 in | Width:36" Width:35 3/4" Depth:28 3/4" Height:70" Depth Without Handles:28 3/4" Depth With Door Opened At 90 Degrees:43" Counter/Depth:Yes Height Without Hinges:68 7/8" Depth Without Door:24" ### Tech

Why this value was used

Medium-confidence chassis inference from RF24BB6200QLAA, RF24BB6600QLAA, RF70F23DER. Donors unanimously report depth_doors_open_90_in=43.0 in; at least four direct chassis dimensions match and none conflict. Matching fields: width_doors_closed_in, height_case_in, height_hinge_in, depth_case_only_in. Donor evidence: Depth With Door Opened At 90 Degrees = 43.0 in | Width:36" Width:35 3/4" Depth:28 3/4" Height:70" Depth Without Handles:28 3/4" Depth With Door Opened At 90 Degrees:43" Counter/Depth:Yes Height Without Hinges:68 7/8" Depth Without Door:24" ### Tech Calculation or inference: same-brand product-class chassis propagation from RF24BB6200QLAA, RF24BB6600QLAA, RF70F23DER.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.75 + 2 * 0.375

Confidence label: medium.

Primary evidence

Samsung measurement source — rf24bb69006maa + side gap from the maker's document
amdirectappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on
Reviewed: 2026-09-04

Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on each side.

Why this value was used

Derived minimum opening width 36.5 in from product width 35.75 in and explicit 0.375 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 35.75 + 2 * 0.375.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — RF70F23DER_V8.pdf
Samsung · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 70.0 in plus propagated top clearance
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 70.0 in plus propagated top clearance 0.375 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 70.0 in plus propagated top clearance 0.375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — rf8000bc-3-door-french-door-autofill-pitcher-24-cu-ft-silver-rf24bb6200qlaa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening depth derived from case-only depth 24.0 in plus propagated rear clearance 2.0 in.
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 24.0 in plus propagated rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 24.0 in plus propagated rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — RF70F23DER_V8.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top for ease of installation."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top for ease of installation."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — RF70F23DER_V8.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top for ease of installation."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top for ease of installation."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Samsung RF70F23DER

Confidence label: medium.

Primary evidence

Samsung measurement source — RF70F23DER_V8.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF70F23DER; original evide
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF70F23DER; original evidence: Exact-model cached Samsung clearance statement: top_clearance_in=0.375 in; 4 copy/copies, 2 domain(s), official=True; no contrary parsed value.

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF70F23DER; original evidence: Exact-model cached Samsung clearance statement: top_clearance_in=0.375 in; 4 copy/copies, 2 domain(s), official=True; no contrary parsed value. Calculation or inference: exact 8-dimension chassis signature; source model Samsung RF70F23DER.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Samsung RF24BB6200QLAA

Confidence label: medium.

Primary evidence

Samsung measurement source — rf8000bc-3-door-french-door-autofill-pitcher-24-cu-ft-silver-rf24bb6200qlaa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF24BB6200QLAA; original e
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF24BB6200QLAA; original evidence: 2 inches of space in the back

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF24BB6200QLAA; original evidence: 2 inches of space in the back Calculation or inference: exact 8-dimension chassis signature; source model Samsung RF24BB6200QLAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.5 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

Samsung measurement source — 62058250-manufacturer's-brochure.pdf
www.nfm.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). Allow 2.5" of clea
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). Allow 2.5" of clearance on hinge side

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). Allow 2.5" of clearance on hinge side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.75 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in = width_doors_closed_in

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

Samsung measurement source — rf24bb69006maa
amdirectappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same-appliance endpoint inference: case width equals exact stored closed width 35.75 in; manufacture
Reviewed: 2026-09-09

Same-appliance endpoint inference: case width equals exact stored closed width 35.75 in; manufacturer does not label a separate case-width endpoint.

Why this value was used

Same-appliance endpoint inference: case width equals exact stored closed width 35.75 in; manufacturer does not label a separate case-width endpoint. Calculation or inference: case_width_in = width_doors_closed_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.