Measurement evidence for Samsung RF23DB990012AA

Value used by ExactFit

35.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — rf23db990012aa
groveappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Width = 35.875 in | w/o Door Handle | 28.75" | | Depth without
Reviewed: 2026-09-04

Plain exact-model specification row: Width = 35.875 in | w/o Door Handle | 28.75" | | Depth without Door (in) | 24" | | Net Height without Hinge | 70.75" | | Width | 35 7/8" | | Height | 73" | | Height (decimal) | 73 | [...] | | | --- | | Width | 35.88 in. | | Height | 73 in. | | Length | 28

Why this value was used

Plain exact-model specification row: Width = 35.875 in | w/o Door Handle | 28.75" | | Depth without Door (in) | 24" | | Net Height without Hinge | 70.75" | | Width | 35 7/8" | | Height | 73" | | Height (decimal) | 73 | [...] | | | --- | | Width | 35.88 in. | | Height | 73 in. | | Length | 28

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — bespoke-counter-depth-4-door-flex-refrigerator-23-cu-ft-with-ai-family-hub-and-ai-vision-inside-in-white-glass-sku-rf23db990012aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model page: Height without Hinge 70.75 in; prior value was height with hinge.
Reviewed: 2026-09-04

Official exact-model page: Height without Hinge 70.75 in; prior value was height with hinge.

Why this value was used

Official exact-model page: Height without Hinge 70.75 in; prior value was height with hinge.

Other evidence found

• 73 in — superseded

  www.samsung.com; location not retained. Model scope: not separately recorded. Raw value: atings :9,999) Alybry3 [...] 631 kWh/year ### Net Case Height with Hinge 73 inch Net Case Height without Hinge 70.75 inch Net De. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

73 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — bespoke-counter-depth-4-door-flex-refrigerator-with-family-hub-23-cu-ft-stainless-steel-rf23db9900qdac
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: s :9,999) Alybry3 [...] 631 kWh/year ### Net Case Height with Hinge 73 inch Net Case Height without
Reviewed: 2026-09-04

s :9,999) Alybry3 [...] 631 kWh/year ### Net Case Height with Hinge 73 inch Net Case Height without Hinge 70.75 inch Net De

Why this value was used

s :9,999) Alybry3 [...] 631 kWh/year ### Net Case Height with Hinge 73 inch Net Case Height without Hinge 70.75 inch Net De

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — bespoke-counter-depth-4-door-flex-refrigerator-23-cu-ft-with-ai-family-hub-and-ai-vision-inside-in-white-glass-sku-rf23db990012aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model page: Depth without Door 24 in; prior value was depth without handle.
Reviewed: 2026-09-04

Official exact-model page: Depth without Door 24 in; prior value was depth without handle.

Why this value was used

Official exact-model page: Depth without Door 24 in; prior value was depth without handle.

Other evidence found

• 28.75 in — superseded

  www.samsung.com; location not retained. Model scope: not separately recorded. Raw value: 75 inch Net Depth with Door Handle 28.75 inch Net Depth without Door Handle 28.75 inch Net Depth without Door 24 inch Net Dimension (W. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — bespoke-counter-depth-4-door-flex-refrigerator-23-cu-ft-with-ai-family-hub-and-ai-vision-inside-in-white-glass-sku-rf23db990012aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth w/o Door Handle: 28.75 in | oor Handle 28.75" Net Height with Hinge 73" Net Height without Hin
Reviewed: 2026-09-04

Depth w/o Door Handle: 28.75 in | oor Handle 28.75" Net Height with Hinge 73" Net Height without Hinge 70.75" Net Depth w/o Door Handle 28.75" Depth without Door (in) 24" Width 35 7/8" Height 73" Height (decimal) 73 Width

Why this value was used

Depth w/o Door Handle: 28.75 in | oor Handle 28.75" Net Height with Hinge 73" Net Height without Hinge 70.75" Net Depth w/o Door Handle 28.75" Depth without Door (in) 24" Width 35 7/8" Height 73" Height (decimal) 73 Width

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — bespoke-counter-depth-4-door-flex-refrigerator-23-cu-ft-with-ai-family-hub-and-ai-vision-inside-in-white-glass-sku-rf23db990012aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with Door Handle: 28.75 in | 5" (H) x 24" (D) Shipping Dimensions 38.25" (W) x 78.625" (H) x 3
Reviewed: 2026-09-04

Depth with Door Handle: 28.75 in | 5" (H) x 24" (D) Shipping Dimensions 38.25" (W) x 78.625" (H) x 30 5/8" (D) Net Depth with Door Handle 28.75" Net Height with Hinge 73" Net Height without Hinge 70.75" Net Depth w/o Door Ha

Why this value was used

Depth with Door Handle: 28.75 in | 5" (H) x 24" (D) Shipping Dimensions 38.25" (W) x 78.625" (H) x 30 5/8" (D) Net Depth with Door Handle 28.75" Net Height with Hinge 73" Net Height without Hinge 70.75" Net Depth w/o Door Ha

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

43 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same RF23DB chassis as RF23DB960012AA/RF23DB970012AA/RF23DB9700QLAA

Confidence label: medium.

Primary evidence

Samsung measurement source — documents for other models on the same chassis
static.pcrichard.com · Web source
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Retained specification excerpt: RF23DB sibling models unanimously report 43 in open-door depth.
Reviewed: 2026-09-04

RF23DB sibling models unanimously report 43 in open-door depth.

Why this value was used

RF23DB sibling models unanimously report 43 in open-door depth. Calculation or inference: same RF23DB chassis as RF23DB960012AA/RF23DB970012AA/RF23DB9700QLAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.875 + 2 * 0.375

Confidence label: medium.

Primary evidence

Samsung measurement source — rf23db990012aa + side gap from the maker's document
groveappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance
Reviewed: 2026-09-04

Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance on each side.

Why this value was used

Derived minimum opening width 36.625 in from product width 35.875 in and explicit 0.375 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 35.875 + 2 * 0.375.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

73.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — WillitFit_RM80F23VMR.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 73.0 in plus propagated top clearance 0.375 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 73.0 in plus propagated top clearance 0.375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — RF23DB9700QLAA_specification-sheet.pdf
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening depth derived from case-only depth 24.0 in plus propagated rear clearance 2.0 in.
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 24.0 in plus propagated rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 24.0 in plus propagated rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — WillitFit_RM80F23VMR.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-29

The document this model's measurements come from states: "allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — WillitFit_RM80F23VMR.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-29

The document this model's measurements come from states: "allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Samsung RM80F23VMR

Confidence label: medium.

Primary evidence

Samsung measurement source — WillitFit_RM80F23VMR.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RM80F23VMR; original evidence: Stored reviewed evidence explicitly applies the same clearance to sides and top. Exact-model Samsung fit guide: allow a 3/8" minimum clearance at sides and top.

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RM80F23VMR; original evidence: Stored reviewed evidence explicitly applies the same clearance to sides and top. Exact-model Samsung fit guide: allow a 3/8" minimum clearance at sides and top. Calculation or inference: exact 8-dimension chassis signature; source model Samsung RM80F23VMR.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Samsung RF23DB9700QLAA

Confidence label: medium.

Primary evidence

Samsung measurement source — RF23DB9700QLAA_specification-sheet.pdf
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF23DB9700QLAA; original e
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF23DB9700QLAA; original evidence: 2” minimum clearance at rear

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to Samsung RF23DB9700QLAA; original evidence: 2” minimum clearance at rear Calculation or inference: exact 8-dimension chassis signature; source model Samsung RF23DB9700QLAA.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — WillitFit_RF23DB9700_2026-10-30.pdf
Samsung · Web source
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-30

Samsung Will-it-fit sheet "MODEL RF23DB9700 DIMENSIONS": "Allow 3.75" of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall." Sheet for RF23DB9700, the same fridge as RF23DB9900 (Samsung spec sheets for both print the identical dimension drawing). The largest door-swing clearance printed is stored (owner rule for clearances); the spec sheets' 2.5" is where the handle may touch the wall.

Why this value was used

Samsung Will-it-fit sheet "MODEL RF23DB9700 DIMENSIONS": "Allow 3.75" of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall." Sheet for RF23DB9700, the same fridge as RF23DB9900 (Samsung spec sheets for both print the identical dimension drawing). The largest door-swing clearance printed is stored (owner rule for clearances); the spec sheets' 2.5" is where the handle may touch the wall.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

11.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — RF23DB9900QD_2026-10-30.pdf
static.pcrichard.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-30

Samsung RF23DB9900 spec sheet, Dimensions top view: each door fully open at 125 degrees reaches 11 3/4" past the cabinet side (59" across both open doors). Stored as the printed door projection past the cabinet side (owner decision 2026-10-17).

Why this value was used

Samsung RF23DB9900 spec sheet, Dimensions top view: each door fully open at 125 degrees reaches 11 3/4" past the cabinet side (59" across both open doors). Stored as the printed door projection past the cabinet side (owner decision 2026-10-17).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.875 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in = width_doors_closed_in

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

Samsung measurement source — rf23db990012aa
groveappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same-appliance endpoint inference: case width equals exact stored closed width 35.875 in; manufactur
Reviewed: 2026-09-09

Same-appliance endpoint inference: case width equals exact stored closed width 35.875 in; manufacturer does not label a separate case-width endpoint.

Why this value was used

Same-appliance endpoint inference: case width equals exact stored closed width 35.875 in; manufacturer does not label a separate case-width endpoint. Calculation or inference: case_width_in = width_doors_closed_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.