Measurement evidence for Samsung RF18A5101SRAA

Value used by ExactFit

32.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — e20369a30b12189b54b244ac9f494439a98c32177c71930c8a183c489172daa0.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-13

Dimensions (WxHxD with hinges and doors): 32 1/8" x 70" x 28 1/8".

Why this value was used

Dimensions (WxHxD with hinges and doors): 32 1/8" x 70" x 28 1/8".

Other evidence found

• 32.33 in — superseded

  www.samsung.com; location not retained. Model scope: not separately recorded. Raw value: Net Width: 32.33 in | n (WxHxD) 32.1 x 70.0 x 28.1 inch - Net Dimension (WxHxD) 816 x 1778 x 714 mm - Net Width (inch) 32.33 inch - Net Case Height with Hinge 70 inch - Net Case Height without Hinge 68.875 i. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — e20369a30b12189b54b244ac9f494439a98c32177c71930c8a183c489172daa0.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-13

Dimensions (WxHxD without hinges and door): 32 1/8" x 68 7/8" x 24 1/2". The stored 70 in is the height with hinges.

Why this value was used

Dimensions (WxHxD without hinges and door): 32 1/8" x 68 7/8" x 24 1/2". The stored 70 in is the height with hinges.

Other evidence found

• 70 in — superseded

  www.samsung.com; location not retained. Model scope: not separately recorded. Raw value: 6 x 1778 x 714 mm Net Width (inch) 32.33 inch Net Case Height with Hinge 70 inch Net Case Height without Hinge 68.875 inch Net D. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — 59847707-manufacturer's-brochure.pdf
www.nfm.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: DOOR 30 1/ 8 " WIDTH (FITS 36" OPENING) 32 1/ 8" HEIGHT WITH HINGE 70" Be sure your new fridge will
Reviewed: 2026-09-04

DOOR 30 1/ 8 " WIDTH (FITS 36" OPENING) 32 1/ 8" HEIGHT WITH HINGE 70" Be sure your new fridge will fit Don't wait until

Why this value was used

DOOR 30 1/ 8 " WIDTH (FITS 36" OPENING) 32 1/ 8" HEIGHT WITH HINGE 70" Be sure your new fridge will fit Don't wait until

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — rf5000a-18-cu-ft-silver-rf18a5101sr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without Door = 24.5 in | Height without Hinge 68.875 inch - Net Depth with Door Handle 28.12
Reviewed: 2026-09-04

Depth without Door = 24.5 in | Height without Hinge 68.875 inch - Net Depth with Door Handle 28.12 inch - Net Depth without Door 24.5 inch - Packing Dimension (WxHxD) 34" x 73 3/4" x 29 3/4" - Net Weight (kg) 96 kg -

Why this value was used

Depth without Door = 24.5 in | Height without Hinge 68.875 inch - Net Depth with Door Handle 28.12 inch - Net Depth without Door 24.5 inch - Packing Dimension (WxHxD) 34" x 73 3/4" x 29 3/4" - Net Weight (kg) 96 kg -

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Samsung measurement source — 315868024
www.homedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact finish-model listing: Depth Excluding Handles 28.13 in, normalized to 28 1/8 in.
Reviewed: 2026-09-04

Exact finish-model listing: Depth Excluding Handles 28.13 in, normalized to 28 1/8 in.

Why this value was used

Exact finish-model listing: Depth Excluding Handles 28.13 in, normalized to 28 1/8 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28.125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — rf5000a-18-cu-ft-silver-rf18a5101sr-aa
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model specification prints Net Depth with Door Handle = 28 1/8 in (28.125).
Reviewed: 2026-09-09

Official exact-model specification prints Net Depth with Door Handle = 28 1/8 in (28.125).

Why this value was used

Official exact-model specification prints Net Depth with Door Handle = 28 1/8 in (28.125).

Other evidence found

• 28.12 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Depth with Door Handle: 28.12 in | ase Height with Hinge 70 inch - Net Case Height without Hinge 68.875 inch - Net Depth with Door Handle 28.12 inch - Net Depth without Door 24.5 inch - Packing Dimension (WxHxD) 34" x 73 3/4" . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

41.5 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: matching RF18A5101 finish-family propagation

Confidence label: medium.

Primary evidence

Samsung measurement source — Samsung RF18A5101 finish-family cached sources
www.mybudgetappliance.com · Web source
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Retained specification excerpt: RF18A5101SG exact listing reports 41.5 in; RF18A5101SR shares the same documented chassis dimensions
Reviewed: 2026-09-04

RF18A5101SG exact listing reports 41.5 in; RF18A5101SR shares the same documented chassis dimensions.

Why this value was used

RF18A5101SG exact listing reports 41.5 in; RF18A5101SR shares the same documented chassis dimensions. Calculation or inference: matching RF18A5101 finish-family propagation.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case_width_in, width_doors_closed_in) + 2 * side_ventilation_clearance_in

Confidence label: high.

Calculation inputs: Overall width; Left-side ventilation clearance; Cabinet case width;

Primary evidence

Samsung measurement source — e20369a30b12189b54b244ac9f494439a98c32177c71930c8a183c489172daa0.pdf
Samsung · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-22

Recalculated 2026-10-22 with the stored formula from current inputs: max(case width 32.125, width doors closed 32.125) + 2 x side clearance 0.375 = 32.875 in. Case width 32 1/8 in is Samsung's printed 'Dimensions (WxHxD without hinges and door): 32 1/8"'; the old 33.08 used the retired retail width 32.33 in.

Why this value was used

Recalculated 2026-10-22 with the stored formula from current inputs: max(case width 32.125, width doors closed 32.125) + 2 x side clearance 0.375 = 32.875 in. Case width 32 1/8 in is Samsung's printed 'Dimensions (WxHxD without hinges and door): 32 1/8"'; the old 33.08 used the retired retail width 32.33 in. Calculation or inference: max(case_width_in, width_doors_closed_in) + 2 * side_ventilation_clearance_in.

Other evidence found

• 33.08 in — superseded

  An earlier brand-wide assumption (no document for this model); location not retained. Model scope: not separately recorded. Raw value: Derived minimum opening width 33.08 in from product width 32.33 in and explicit 0.375 in clearance on each side.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Samsung measurement source — 1fa7b7b9-e53e-45c4-aed2-df18118f911c.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in.
Reviewed: 2026-09-05

Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in.

Why this value was used

Samsung installation envelope: 70 in appliance endpoint + 0.375 in clearance = 70.375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Samsung measurement source — 1fa7b7b9-e53e-45c4-aed2-df18118f911c.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Samsung installation envelope: 24.5 in appliance endpoint + 2 in clearance = 26.5 in.
Reviewed: 2026-09-05

Samsung installation envelope: 24.5 in appliance endpoint + 2 in clearance = 26.5 in.

Why this value was used

Samsung installation envelope: 24.5 in appliance endpoint + 2 in clearance = 26.5 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 1fa7b7b9-e53e-45c4-aed2-df18118f911c.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 1fa7b7b9-e53e-45c4-aed2-df18118f911c.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides an
Reviewed: 2026-10-29

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Why this value was used

The document this model's measurements come from states: "Allow a 3/8" minimum clearance at sides and top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 1fa7b7b9-e53e-45c4-aed2-df18118f911c.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cached exact-model result: Allow a 3/8" minimum clearance at sides and top
Reviewed: 2026-09-05

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Why this value was used

Cached exact-model result: Allow a 3/8" minimum clearance at sides and top

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — 1fa7b7b9-e53e-45c4-aed2-df18118f911c.pdf
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cached exact-model result: Allow 2" minimum clearance at rear
Reviewed: 2026-09-05

Cached exact-model result: Allow 2" minimum clearance at rear

Why this value was used

Cached exact-model result: Allow 2" minimum clearance at rear

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

Samsung measurement source — 105583824.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 17
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). minimum clearance of 3 3/4" (95 mm) from the wall

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). minimum clearance of 3 3/4" (95 mm) from the wall

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

3.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — e20369a30b12189b54b244ac9f494439a98c32177c71930c8a183c489172daa0.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-14

3 3/4 in printed for installed along a wall. Read by the verification agent (run De20369a30b) from a document naming the model.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

3 3/4 in printed for installed along a wall. Read by the verification agent (run De20369a30b) from a document naming the model.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.125 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Samsung measurement source — e20369a30b12189b54b244ac9f494439a98c32177c71930c8a183c489172daa0.pdf
Samsung · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-13

Dimensions (WxHxD without hinges and door): 32 1/8" x 68 7/8" x 24 1/2". The stored 32 in was a retail figure.

Why this value was used

Dimensions (WxHxD without hinges and door): 32 1/8" x 68 7/8" x 24 1/2". The stored 32 in was a retail figure.

Other evidence found

• 32 in — superseded

  www.samsung.com; location not retained. Model scope: not separately recorded. Raw value: Official Samsung cached specification: case_width_in = 32.0 in; source_id=258. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.