Measurement evidence for Maytag MSS25N4MKZ

Value used by ExactFit

35.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish MSS25N4MKZ | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: net Width: 35.5 in | on Configuration Refrigerator Refrigerator Type Side-by-Side ### Dimensions Cab
Reviewed: 2026-09-04

net Width: 35.5 in | on Configuration Refrigerator Refrigerator Type Side-by-Side ### Dimensions Cabinet Width 35.5 in Depth 33.625 in Depth Closed Excluding Handles 31.625 in Depth Closed Including

Why this value was used

net Width: 35.5 in | on Configuration Refrigerator Refrigerator Type Side-by-Side ### Dimensions Cabinet Width 35.5 in Depth 33.625 in Depth Closed Excluding Handles 31.625 in Depth Closed Including

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.62 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish MSS25N4MKZ | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Cabinet: 68.62 in | 3 in Freezer Capacity Volume 9.61 cu. ft. Gross Weight 231 lbs
Reviewed: 2026-09-04

Height To Top Of Cabinet: 68.62 in | 3 in Freezer Capacity Volume 9.61 cu. ft. Gross Weight 231 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 219.99 lbs Refrigerator Capacit

Why this value was used

Height To Top Of Cabinet: 68.62 in | 3 in Freezer Capacity Volume 9.61 cu. ft. Gross Weight 231 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 219.99 lbs Refrigerator Capacit

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish MSS25N4MKZ | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Door Hinge: 69.25 in | u. ft. Gross Weight 231 lbs Height 69.625 in Height To Top O
Reviewed: 2026-09-04

Height To Top Of Door Hinge: 69.25 in | u. ft. Gross Weight 231 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 219.99 lbs Refrigerator Capacity Volume 15.32 Total Refrigerator Cap

Why this value was used

Height To Top Of Door Hinge: 69.25 in | u. ft. Gross Weight 231 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 219.99 lbs Refrigerator Capacity Volume 15.32 Total Refrigerator Cap

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish MSS25N4MKZ | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handl
Reviewed: 2026-09-04

Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 33.625 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.313 in Freezer Capacity Volume 9.61 cu. ft. G

Why this value was used

Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 33.625 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.313 in Freezer Capacity Volume 9.61 cu. ft. G

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.63 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag Refrigerators MSS25N4MKZ (Side-by-Side) from Parsons Furniture and Appliance
www.parsonsfurniture.net · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: | | Overall Depth | 33.63 inch(es) / 85.41 cm | | Depth (Without Handles) | 31.63 inch(es) / 80.33 c
Reviewed: 2026-09-04

| | Overall Depth | 33.63 inch(es) / 85.41 cm | | Depth (Without Handles) | 31.63 inch(es) / 80.33 cm | | Depth (With Handles) | 33.63

Why this value was used

| | Overall Depth | 33.63 inch(es) / 85.41 cm | | Depth (Without Handles) | 31.63 inch(es) / 80.33 cm | | Depth (With Handles) | 33.63

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.63 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag Refrigerators MSS25N4MKZ (Side-by-Side) from Parsons Furniture and Appliance
www.parsonsfurniture.net · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: ight (With Hinge) | 69.25 inch(es) / 175.9 cm | | Overall Depth | 33.63 inch(es) / 85.41 cm | | Dept
Reviewed: 2026-09-04

ight (With Hinge) | 69.25 inch(es) / 175.9 cm | | Overall Depth | 33.63 inch(es) / 85.41 cm | | Depth (Without Handles) | 31

Why this value was used

ight (With Hinge) | 69.25 inch(es) / 175.9 cm | | Overall Depth | 33.63 inch(es) / 85.41 cm | | Depth (Without Handles) | 31

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49.31 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish MSS25N4MKZ | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors 28 in Depth With Door Open 90: 49.31 in | pth Closed Excluding Handles 31.625
Reviewed: 2026-09-04

Depth Excluding Doors 28 in Depth With Door Open 90: 49.31 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 33.625 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.313 in Freezer Capacity Volume 9.61 cu. ft. Gross Weight 231 lbs Height 69.625 in Heig

Why this value was used

Depth Excluding Doors 28 in Depth With Door Open 90: 49.31 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 33.625 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.313 in Freezer Capacity Volume 9.61 cu. ft. Gross Weight 231 lbs Height 69.625 in Heig

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 35.5 + 2 * 0.5 = 36.5

Confidence label: medium.

Primary evidence

Maytag measurement source — local exact-model dimensions + installation clearance
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: 35.5 in closed width plus 0.5 in ventilation on each side.
Reviewed: 2026-09-04

35.5 in closed width plus 0.5 in ventilation on each side.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 36.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 30 in — superseded

  https://www.canadianappliance.ca/product/Maytag-French-Door-Refrigerator/200057943; location not retained. Model scope: not separately recorded. Raw value: 1/8 inches | | Cabinet Width | 29 1/2 inches | | Cutout Width | 30 inches | | Height | 68 3/8 inches | | Height to Top of C. The final reviewed registry supersedes this earlier audit value. 35.5 in closed width plus 0.5 in ventilation on each side.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Maytag MSS25N4MKZ Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 69.25 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 69.25 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Maytag MSS25N4MKZ Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 28.0 in plus documented rear clearance 1.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 28.0 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag MSS25N4MKZ Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

1.27 cm) of space on each side and at the top

Why this value was used

1.27 cm) of space on each side and at the top

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag MSS25N4MKZ Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

2.54 cm) of space behind

Why this value was used

2.54 cm) of space behind

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag MSS25N4MKZ Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

next to a fixed wall, leave a 2" (5.08 cm

Why this value was used

next to a fixed wall, leave a 2" (5.08 cm

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.5 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish MSS25N4MKZ | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width = 35.5 in | ration Configuration Refrigerator Refrigerator Type Side-by-Side ### Dimen
Reviewed: 2026-09-04

Cabinet Width = 35.5 in | ration Configuration Refrigerator Refrigerator Type Side-by-Side ### Dimensions Cabinet Width 35.5 in Depth 33.625 in Depth Closed Excluding Handles 31.625 in Depth Closed Including | independent cached support: maytag.com

Why this value was used

Cabinet Width = 35.5 in | ration Configuration Refrigerator Refrigerator Type Side-by-Side ### Dimensions Cabinet Width 35.5 in Depth 33.625 in Depth Closed Excluding Handles 31.625 in Depth Closed Including | independent cached support: maytag.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Whirlpool-platform freestanding family installation clearance

Confidence label: low.

Primary evidence

Maytag measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-04

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.