Measurement evidence for Maytag MRSF4036PZ

Value used by ExactFit

35.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish MRSF4036PZ | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: net Width: 35.5 in | less Steel Handle Type Reach Through Handle Hidden Hinge Yes ### Dimensions Cab
Reviewed: 2026-09-04

net Width: 35.5 in | less Steel Handle Type Reach Through Handle Hidden Hinge Yes ### Dimensions Cabinet Width 35.5 in Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed Excluding Handles 31.625 in

Why this value was used

net Width: 35.5 in | less Steel Handle Type Reach Through Handle Hidden Hinge Yes ### Dimensions Cabinet Width 35.5 in Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed Excluding Handles 31.625 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.62 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish MRSF4036PZ | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Cabinet: 68.62 in | 5 in Freezer Capacity Volume 9.11 cu. ft. Gross Weight 270 lbs
Reviewed: 2026-09-04

Height To Top Of Cabinet: 68.62 in | 5 in Freezer Capacity Volume 9.11 cu. ft. Gross Weight 270 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 264 lbs Refrigerator Capacity V

Why this value was used

Height To Top Of Cabinet: 68.62 in | 5 in Freezer Capacity Volume 9.11 cu. ft. Gross Weight 270 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 264 lbs Refrigerator Capacity V

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish MRSF4036PZ | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Door Hinge: 69.25 in | u. ft. Gross Weight 270 lbs Height 69.625 in Height To Top O
Reviewed: 2026-09-04

Height To Top Of Door Hinge: 69.25 in | u. ft. Gross Weight 270 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 264 lbs Refrigerator Capacity Volume 15.44, 15.44 Total Refrigerator

Why this value was used

Height To Top Of Door Hinge: 69.25 in | u. ft. Gross Weight 270 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 264 lbs Refrigerator Capacity Volume 15.44, 15.44 Total Refrigerator

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish MRSF4036PZ | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handl
Reviewed: 2026-09-04

Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.313 in Depth-Drawer Open 42.125 in Freezer Ca

Why this value was used

Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.313 in Depth-Drawer Open 42.125 in Freezer Ca

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.62 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish MRSF4036PZ | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Excluding Handles: 31.62 in | Yes ### Dimensions Cabinet Width 35.5 in Capacity 24.5 c
Reviewed: 2026-09-04

Depth Closed Excluding Handles: 31.62 in | Yes ### Dimensions Cabinet Width 35.5 in Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With

Why this value was used

Depth Closed Excluding Handles: 31.62 in | Yes ### Dimensions Cabinet Width 35.5 in Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.12 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish MRSF4036PZ | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Including Handles: 34.12 in | Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed Exclu
Reviewed: 2026-09-04

Depth Closed Including Handles: 34.12 in | Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.313 in Depth-Draw

Why this value was used

Depth Closed Including Handles: 34.12 in | Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.313 in Depth-Draw

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49.313 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRSF4036PZ Side-by-Side Refrigerators | Tennessee | Appliance Mart
shopappliancemart.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: | Depth Closed Including Handles | 34.125 in | | Depth With Door Open 90 Degree | 49.313 in | | Dept
Reviewed: 2026-09-04

| Depth Closed Including Handles | 34.125 in | | Depth With Door Open 90 Degree | 49.313 in | | Depth-Drawer Open | 42.125 in | | Height | 69

Why this value was used

| Depth Closed Including Handles | 34.125 in | | Depth With Door Open 90 Degree | 49.313 in | | Depth-Drawer Open | 42.125 in | | Height | 69

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Refrigerator MAYTAG MRSF4036PZ - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cached exact-model manual: Normal minimum cabinet cut-out width required for product installation is
Reviewed: 2026-09-04

Cached exact-model manual: Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm).

Why this value was used

Cached exact-model manual: Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Refrigerator MAYTAG MRSF4036PZ - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 69.25 in plus documented top clearanc
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 69.25 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 69.25 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Maytag measurement source — 588fbc22d4055dd87a2888e60df87bf08b4a149ad0514e0a160a8a1a557d75c5.pdf
assets.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Installation envelope: 28 in case depth + 1 in documented rear space = 29 in.

Why this value was used

Installation envelope: 28 in case depth + 1 in documented rear space = 29 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Refrigerator MAYTAG MRSF4036PZ - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: 1.27 cm) of space on each side and at the top
Reviewed: 2026-09-05

1.27 cm) of space on each side and at the top

Why this value was used

1.27 cm) of space on each side and at the top

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag installation document — 588fbc22d4055dd87a2888e60df87bf08b4a149ad0514e0a160a8a1a557d75c5.pdf
assets.ajmadison.com · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Family owner manual: remove rear moulding/baseboards and allow 1" (2.54 cm) of space behind the refrigerator.

Why this value was used

Family owner manual: remove rear moulding/baseboards and allow 1" (2.54 cm) of space behind the refrigerator.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Refrigerator MAYTAG MRSF4036PZ - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: next to a fixed wall, leave a 2" (5.08 cm
Reviewed: 2026-09-05

next to a fixed wall, leave a 2" (5.08 cm

Why this value was used

next to a fixed wall, leave a 2" (5.08 cm

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.5 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish MRSF4036PZ | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width = 35.5 in | tainless Steel Handle Type Reach Through Handle Hidden Hinge Yes ### Dimen
Reviewed: 2026-09-04

Cabinet Width = 35.5 in | tainless Steel Handle Type Reach Through Handle Hidden Hinge Yes ### Dimensions Cabinet Width 35.5 in Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed Excluding Handles 31.625 in

Why this value was used

Cabinet Width = 35.5 in | tainless Steel Handle Type Reach Through Handle Hidden Hinge Yes ### Dimensions Cabinet Width 35.5 in Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed Excluding Handles 31.625 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Whirlpool-platform freestanding family installation clearance

Confidence label: low.

Primary evidence

Maytag measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-04

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.